• 한국생산제조학회지
• /
• 제23권2호
• /
• pp.157-163
• /
• 2014

In this paper, a robust MRAC (model reference adaptive control) scheme is applied to control an electrohydraulic positioning system under various loads. The inverse dead-zone compensator in the control system cancels out the dead-zone response, and an integrator added to the controller provides good position-tracking ability. LQG/LTR (linear quadratic Gaussian control with loop transfer recovery) closed-loop model is used as the reference model for learning the MRAC system. LQG/LTR provides a systematic technique to design the linear controller that optimizes the objective function using some compromise between the control effort and the system performance in the frequency domain. Different external load tests are performed to investigate the effectiveness of the designed MRAC system in real time. The experimental results show that the tracking performance of the proposed system is highly accurate, which offers considerable robustness even with a large change in the load.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제53권2호
• /
• pp.107-113
• /
• 2004

This paper develops a adaptive fuzzy controller based fuzzy logic control for high performance of permanent magnet synchronous motor(PMSM) drives. In the proposed system, fuzzy control is used to implement the direct controller as well as the adaptation mechanism. The operation of the direct fuzzy controller and the fuzzy logic based adaptation mechanism is studied. A model reference adaptive scheme is proposed in which the adaptation mechanism is executed by fuzzy logic based on the error and change of error measured between the motor speed and output of a reference model. The control performance of the adaptive fuzzy controller is evaluated by simulation for various operating conditions. The validity of the proposed adaptive fuzzy controller is confirmed by performance results for PMSM drive system.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.1692-1695
• /
• 1997

In this paper, a new control scheme for master-slave control of telerobot is proposed. The porposed method can be classified into unilater master-slave control methods in the aspect of the data flow. But the master arm in the proposed control scheme can deliver operator the similar kinesthetic sense as other bilateral force reflecting master arms do. The principle concept is that the sensed operator's force/torque is used as the reference input for a damping controller type of telerobot controller which track the operators efforts. Master arm and master controller can be implemented in a simple form, and it needs not be driven by actuators, but force sensing capability.

• 제어로봇시스템학회논문지
• /
• 제6권10호
• /
• pp.894-902
• /
• 2000

This paper proposes a force reflection control method with a speed saturation compensation scheme for the slave manipulators having a speed saturation due to the high reduction ratio joints. When speed saturation is generated, the proposed force reflection control method not only shows an anti-windup feature in controlling the slave manipulator but also makes the master manipulator move slowly using the force reflection caused by saturation. In this way, the position of the slave manipulator tracks the reference position regardless of speed saturation. The experimental results show that the proposed control method provides excellent performance.

• 제어로봇시스템학회논문지
• /
• 제9권12호
• /
• pp.1001-1008
• /
• 2003

A time-delay compensation method for vector control system is proposed that can compensate for voltage and current distortions resulting from a time delay in the overall system due to the low pass filter, hysteresis control inverter, microprocessor program computation time, and so on. The proposed scheme estimates the time delay using the difference between the Q-axis stator current command and the time-delayed actual Q-axis stator current in a synchronous reference frame, then compensates the time delay in the voltage and current using the angular displacement of a DQ transformation. Accordingly, the proposed scheme can accurately compensate for the time delay related to the overall system, thereby significantly improving the performance of the vector control system, as verified by simulation and experiment.

• 전력전자학회논문지
• /
• 제21권6호
• /
• pp.465-472
• /
• 2016

A nonlinear load causes harmonic distortion and hampers the performance of other loads or distributed generation (DG) sources connected to the point of common coupling (PCC). This study proposes a new control strategy to reduce harmonic components, such as fifth and seventh harmonics, at the PCC under nonlinear loads in islanded microgrids, which comprise more than two DG sources. The proposed control scheme enables the DG source to share the power commanded by the control center as well as to compensate for the voltage harmonics at the PCC. The reference current is estimated from the voltage harmonics and injecting power; thus, the control scheme is implemented without any additional hardware devices. The simulation and experimental results are presented to verify the effectiveness of the proposed control method.

• Journal of Electrical Engineering and information Science
• /
• 제3권2호
• /
• pp.251-260
• /
• 1998

A DSP-based robust nonlinear speed control of a permanent magnet synchronous motor(PMSM) which is robust to unknown parameter variations and speed measurement error is presented. The model reference adaptive system(MRAS) based adaptation mechanisms for the estimation of slowly varying parameters are derived using the Lyapunov stability theory. For the disturbances or quickly varying parameters. a quasi-linearized and decoupled model including the influence of parameter variations and speed measurement error on the nonlinear speed control of a PMSM is derived. Based on this model, a boundary layer integral sliding mode controller to improve the robustness and performance of the nonlinear speed control of a PMSM is designed and compared with the conventional controller. To show the validity of the proposed control scheme, simulations and experimental works are carried out and compared with the conventional control scheme.

• 한국산업융합학회 논문집
• /
• 제19권1호
• /
• pp.18-30
• /
• 2016

In this paper, we propose a new technique to the design and real-time control of an adaptive controller for robotic manipulator based on digital signal processors. The Texas Instruments DSPs(TMS320C80) chips are used in implementing real-time adaptive control algorithms to provide enhanced motion control performance for dual-arm robotic manipulators. In the proposed scheme, adaptation laws are derived from model reference adaptive control principle based on the improved Lyapunov second method. The proposed adaptive controller consists of an adaptive feed-forward and feedback controller and time-varying auxiliary controller elements. The proposed control scheme is simple in structure, fast in computation, and suitable for real-time control. Moreover, this scheme does not require any accurate dynamic modeling, nor values of manipulator parameters and payload. Performance of the proposed adaptive controller is illustrated by simulation and experimental results for a dual arm robot manipulator with eight joints. joint space and cartesian space.

• 한국항공우주학회지
• /
• 제49권9호
• /
• pp.749-757
• /
• 2021

쿼드로터를 활용한 운송 임무에서 임의의 유상하중을 장착하게 되면 질량, 관성모멘트, 무게중심의 위치와 같은 모델 파라미터가 변화하게 된다. 더욱이 유상하중이 기체에 장착되는 위치가 기체의 무게중심과 일치하지 않는 경우 무게중심의 변화는 야기되며 이는 제어 성능에 악영향을 미치게 된다. 이에 본 논문에서는 유상하중에 따른 모델의 불확실성을 보상하기 위하여, 선형 제차 조정기(Linear Quadratic Regulator, LQR) 기반의 모델 참조 적응 제어기법(Model Reference Adaptive Control, MRAC)을 제안한다. 먼저 고정된 유상하중을 고려한 쿼드로터의 동역학 모델을 유도하고, 선형 제차 조정기를 이용하여 기준제어기를 선정한다. 참조 모델은 과도응답을 향상하기 위해 폐루프 참조 모델을 사용하였으며, 선형 제차 조정기를 통하여 선정하였다. 또한, 안정성 분석을 통하여 모델 파라미터를 추정하기 위한 적응 제어기법을 설계하였다. 제안하는 제어기의 성능을 확인하기 위하여 모델 파라미터의 불확실성이 존재하는 상황에서 선형 재차 조정기와 성능을 비교하였다. 그리고 외란이 있는 상황에서 기존의 모델 참조 적응 제어기법과도 제안한 제어기의 결과를 비교하여 과도응답과 강건성에 대해서도 분석하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1997년도 전력전자학술대회 논문집
• /
• pp.70-78
• /
• 1997

A DSP-based nonlinear speed control of a permanent magnet synchronous motor(PMSM) which is robust to unknown parameter variations and speed measurement error is presented. The model reference adaptive system(MRAS) based adaptation mechanisms for the estimation of slowly varying parameters are derived using the Lyapunov stability theory. For the disturbances or quickly varying parameters, a quasi-linearized and decoupled model including the influence of parameter variations and speed measurement error on the nonlinear speed control of the PMSM is derived. Based on this model, a boundary layer integral sliding mode controller to improve the robustness and performance of a PMSM drive is designed and compared with the conventional controller. To show the validity of the proposed control scheme, simulations and experimental works are carried out and compared with the conventional control scheme.