• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1598-1602
• /
• 2003

The parallel-type mechanism provides more accurate and stiff motion than the serial-type mechanism. However, in case of using the haptic device, the performance of the force reflection can be deteriorated due to the singular points existing in workspace. In this paper, we propose a redundantly actuated parallel 3-DOF haptic device, which is singularity-free in the workspace and has an improved force reflection capability. In addition, we propose a new force distribution algorithm, which can reflect force of both high and low resolution, using two sets of actuator with different size. Redundant actuators are attached to the base frame in order to minimize the inertia of the system. Moreover, a wire and gear reduction system is employed to achieve high force reflection along with soft feeling. We confirm the performance of the force reflection capability throughout simulation.

• 제어로봇시스템학회논문지
• /
• 제9권6호
• /
• pp.456-465
• /
• 2003

It is well-known that bio-systems does not calculate inverse dynamics for trajectory planning, but they move by proper modulation of system impedances. Inspired by bio-systems, a biomimetic trajectory planning method is proposed in this work. This scheme is based on employment of redundant actuation which prevails in bio-systems. We discuss that for the generation of the biomimetic trajectory, intelligent structure of bio-systems plays an important role. Redundant actuation and kinematic redundancy fall into such a category of intelligent structure. The proposed biomimetic trajectory planning modulates the complete dynamic behavior such as natural frequencies and damping ratios by using the intelligent structure. Experimental work is illustrated to show the effectiveness of the proposed biomimetic trajectory planning for a five-bar mechanism with redundant actuators.

• 한국정밀공학회지
• /
• 제24권2호
• /
• pp.64-72
• /
• 2007

Many human-body motions such as walking, running, jumping, etc. require a significant amount of power. To achieve a high power-to-weight ratio of the humanoid robot system, this paper proposes a new design of the bio-mimetic leg mechanism resembling musculoskeletal system of the human body. The hip joints of the system considered here are powered by 5 human-like bi-and mono-articular muscles, and the joints of knee and ankle are redundantly actuated by both bi-articular muscles and joint actuators. The kinematics for the leg mechanism is derived and a kinematic index to measure force transmission ratio is introduced. It is demonstrated through simulation that incorporation of redundant muscles into the leg mechanism enhances the power of the mechanism approximately 2 times of the minimum actuation.

• 로봇학회논문지
• /
• 제2권2호
• /
• pp.168-177
• /
• 2007

In a number of fields, robots are being used for two purposes: efficiency and safety. Most robots, however, have single-actuator mechanism for each joint, where the tasks are performed with high stiffness. High stiffness causes undesired problems to the environment and robots. This study proposes redundant actuator mechanism as an alternative idea to cope with these problems. In this paper, Double-Actuator Unit (DAU) is implemented at each joint for applications of multi-link manipulators. The DAU is composed of two motors: the positioning actuator and the stiffness modulator, which enables independent control of positioning and compliance. A three-link manipulator with DAUs enables adaptive control of RCC. By modulating the joint stiffness of the manipulator and controlling the position of RCC, we can significantly reduce contact force during assembly tasks and surgical procedures.

• 한국정밀공학회지
• /
• 제26권7호
• /
• pp.134-141
• /
• 2009

Recently, many researchers have tried to develop wearable robots for various fields such as medical and military purposes. We have been studying robotic exoskeletons to assist the motion of persons who have problems with their muscle function in daily activities and rehabilitation. The upper-limb motions (shoulder, elbow and wrist motion) are especially important for such persons to perform daily activities. Generally for shoulder motion 300F is needed to describe its motion(extension/flexion, abduction/adduction, internal/external rotation) but we have used a redundant actuator thus making a 4 DOF system. In this paper, we proposed the mechanism design of the exoskeleton which consists of 4-DOF for shoulder and 1-DOF for elbow robotic exoskeleton to assist upper-limb motion. Then we compared the new mechanism design and prototype mechanism design. Here we also analyze the proposed system kinematically to find out and to avoid the singular point. This research will ensure that the proposed wearable robot system make human's motion more powerfully and more easily.

• 한국음향학회지
• /
• 제21권4호
• /
• pp.349-360
• /
• 2002

인터넷 폰 시스템은 네트워크 트래픽 문제로 인한 지연, 지터 그리고 패킷 손실을 경험하고 이로 인한 통화품질의 저하가 문제가 되어 통화품질 (QoS) 향상 기술이 필요하게 되었다. 본 논문에서는 인터넷상에서 통화품질을 저해하는 요소들을 분석하고 실시간 전송 프로토콜/실시간 전송제어 프로토콜 (RTP/RTCP)을 이용하여 네트워크 상태를 진단하여 송, 수신 단말기간 네트워크 트래픽에 알맞은 방식으로 인코딩된 패킷을 송,수신하는 동적인 손실 복구 알고리즘을 제안한다. 실험결과 제안한 부가정보를 이용한 동적인 손실 복구 알고리즘은 연속 패킷손실인 경우 63%의 손실패킷 복원률을 보여주며, 비연속 패킷손실인 경우 42%의 패킷손실 복원률을 보여준다.

• 한국정보시스템학회지:정보시스템연구
• /
• 제4권
• /
• pp.85-104
• /
• 1995

In a loosely-coupled distributed database server system, a server failure and/or a communication failure can be masked by a resiliency mechanism. Recognizing that a distributed transaction executes at several servers during its lifetime, we propose a resiliency mechanism which allows continuous transaction processing in distributed database server systems in the presence of a server failure. The resiliency mechanism for transaction processing is achieved by keeping redundant information using a primary/backup approach. The purpose of this paper is to analyze the performance improvement opportunities with the resiliency mechanism and to present the design of the proposed system.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.104.5-104
• /
• 2002

In this paper, we focus on a configuration control method of a redundant manipulator. The configuration of a redundant manipulator has been determined by geometry constraints and additional conditions, such as obstacle avoidance and dexterity optimization. This paper also utilizes optimization, and the additional condition (or performance index) to be optimized is stiffness of the end-effector and joints' torque. Stiffness and torque may be a natural attribute to be controlled during working and those vary as manipulator configuration does. So the optimal configuration from the viewpoint of stiffness and joint torque is studied. If the servo control mechanism of the joints Is assumed to be a...

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.827-831
• /
• 2008

In this paper, kinematic analysis for a planar 3-DOF redundant stage which has four actuators is presented by using SimMechanics software package. SimMechanics is a block sets of the Matlab/Simulink package. The SimMechanics enables a simplified model for a complex kinematic mechanism, since kinematic relationship between joints and linkages for the kinematic chains are expressed as line vectors and block diagrams. Here, positional error and limit values of movement ranges of the stage are evaluated by using the SimMechanics. The validity of the kinematic characteristics model was compared with theoretical kinematic analyses for the 3-DOF stage.

• ETRI Journal
• /
• 제39권4호
• /
• pp.605-613
• /
• 2017

Simulated fault injection (SFI) is widely used to assess the effectiveness of fault tolerance mechanisms in safety-critical embedded systems (SCESs) because of its advantages such as controllability and observability. However, the long test time of SFI due to the large number of test cases and the complex simulation models of modern SCESs has been identified as a limiting factor. We present a method that can accelerate an SFI tool using a checkpoint forwarding (CF) technique. To evaluate the performance of CF-based SFI (CF-SFI), we have developed a CF mechanism using Verilog fault-injection tools and two systems under test (SUT): a single-core-based co-simulation model and a triple modular redundant co-simulation model. Both systems use the Verilog simulation model of the OpenRISC 1200 processor and can execute the embedded benchmarks from MiBench. We investigate the effectiveness of the CF mechanism and evaluate the two SUTs by measuring the test time as well as the failure rates. Compared to the SFI with no CF mechanism, the proposed CF-SFI approach reduces the test time of the two SUTs by 29%-45%.