• Journal of Animal Science and Technology
• /
• v.49 no.4
• /
• pp.491-500
• /
• 2007

Two experiments were used to determine the effects of environment-friendly diets on growth performance, fecal excretion, nitrogen excretion and emission gases in manure for growing pigs. In experiment 1, ninety six crossed pigs(Landrace×Yorkshire×Duroc) were allocated into four treatments. Treatments were AME(adequate ME diet, 3,265 kcal/kg), LME(lower ME diet, 3,100 kcal/kg), LME 0.05(lower ME diet+α- galactosidase & β-mannanase 0.05%) and LME 0.10(lower ME diet+α-galactosidase & β-mannanase 0.10%). Pigs fed AME diet had lower ADFI(Average Daily Feed Intake) than pigs fed other diets(p<0.05). DM(Dry Matter) digestibility in pigs fed AME and LME 0.10 diets had greater than pigs fed LME diet(p<0.05). Energy digestibility is higher in pigs fed AME and LME 0.10 diets than other treatments(p<0.05). In experiment 2, twenty four crossbred pigs(33.71 kg average BW) were used in a 14-d metabolism experiment. The pigs were housed in individual cages equipped with plastic bed flooring. Treatments were CP(Crude protein) 18% without Bacillus sp., CP 18% diet+Bacillus sp. 0.05%, CP 14% without Bacillus sp. and CP 14% diet+Bacillus sp. 0.05%. Nitrogen intake was higher for CP 18% diets than CP 14% diets(p<0.05). DM, N(Nitrogen) and energy digestibility were affected by probiotics(p<0.05). With the high CP in diets, Energy and N digestibility, urine N percent, urine N excretion and total N excretion were increased significantly compared to low CP in diets(p<0.05). Among the treatments, DM and N digestibilities, feces N excretion, N absorption were decreased significantly(p<0.05), however, feces excretion, feces N, urine N percent, urine N excretion and total N excretion were increased significantly(p<0.05) when pigs fed without probiotics diets compare to pigs fed with probiotics diets. DM and N digestibility, feces excretion, feces N excretion, urine N percent, urine N excretion, total N excretion, N absorption and N adsorption ratio were CP×probiotic interactions in p<0.05. Ammonia(p<0.01) and H2S(p<0.05) in manure were lower in CP 14% diets than CP 18% diets. Also, ammonia and H2S in manure were CP×probiotic interactions in p<0.05. In conclusion, low energy and reduction of CP dietary added enzyme and probiotics improved nutrient digestibility and reduced odors emission in manure for growing pigs.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.42 no.6
• /
• pp.21-30
• /
• 2014

The purpose of this study was to evaluate human thermal comfort in summer by the type of greenery in parks and to explore planning solutions to supply a comfortable thermal environment in parks. The research was conducted in three different land cover types: a park with multi-wide-canopied trees(WOODLAND), park with grass(LAWN) and park with pavement(PAV) as reference sites in Hamyang-Gun SangrimPark. Field measurements of air temperature, relative humidity and wind velocity, short-wave and long-wave radiation from six directions(east, west, north, south, upward and downward) were carried out in the summer of 2014(August 21-23 and 29-30). Mean Radiant Temperature($T_{mrt}$) absorbed by a human-biometeorological reference person was estimated from integral radiation and the calculation of angular factors. The thermal comfort index PET was calculated by Rayman software, UTCI, OUT_SET$^*$ were calculated using the UTCI Calculator and the Thermal Comfort Calculator of Richard DeDear. The results showed that the WOODLAND has the maximum cooling effect during daytime, reduced air temperatures/$T_{mrt}$ by up to $5.9^{\circ}C/35^{\circ}C$ compared to PAV and lowered heat stress values despite increasing relative humidity values and decreasing wind velocity. While the LAWN had very slight cooling effects during daytime, reduced air temperatures/$T_{mrt}$ by up to $0.9^{\circ}C/3^{\circ}C$ compared to PAV, the improvement effects of the thermal comfort index was very slight. However, during nighttime the microclimatic and radiant conditions of WOODLAND, LAWN, and PAV were similar owing to the absence of solar radiation, reduction of wind velocity and an increase in relative humidity. Because the shading and evapotranspiration effects of the WOODLAND were much greater than the evapotranspiration effects of the LAWN, it can be said that the solutions for supplying comfortable thermal environment in parks are to amplify the green volumes rather than green areas. This study was undertaken to evaluate the human thermal comfort in summer of WOODLAND/LAWN parks and to determine the improvement effects of thermal comfort index. These results can contribute to the provision better thermal comfort for park users during park planning.

• Korean Journal of Soil Science and Fertilizer
• /
• v.35 no.4
• /
• pp.216-222
• /
• 2002

Field experiments were conducted to investigate the effect of various cultural practices on methane($CH_4$) emission in tillage and no-tillage practice in a clayey paddy soil from 1998 to 2000. The factors evaluated in tillage and no-tillage methods were types of nitrogen fertilizers, application method of chemical fertilizers, rice straw application and cultivation method. Of the nitrogen fertilizers, the amount of $CH_4$ emission in ammonium sulfate plot was the lowest, regardless of tillage and the application method. 26.4~41.1% of reduction by ammonium sulfate compared with urea. But in no-tillage which have problem of poor rice yield than tillage, coated urea was more effective nitrogen fertilizer because that showed similar $CH_4$ emission and highest rice yield at 80% of dosage of nitrogen. No-tillage plot emitted lower $CH_4$ than tillage plot where the fertilizers were incorporated. On the contrary, no-tillage plot showed a little higher $CH_4$ emission compared with tillage plot for the surface application. When rice straw was applied, no-tillage practice reduced methane emission by 26.6% compared with tillage practice, but showing a little difference of 10.7% in no application. With cultivation method, no-tillage practice reduced methane emission 26.6% compared with tillage for the 30-d-old seedling transplanting. But for the dry direct seeding practice, no-tillage was a less effective because considerable amounts of rice straw incorporated by tillage were more decomposed aerobically in the soil and emitted as $CO_2$ to the atmosphere with flooding in no-tillage soil.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.21 no.1
• /
• pp.76-82
• /
• 2017

Purpose Whole body bone scan is one of the most frequently performed in nuclear medicine. Basically, both the anterior and posterior views are acquired simultaneously. Occasionally, it is difficult to distinguish the lesion by only the anterior view and the posterior view. In this case, accurate location of the lesion through SPECT / CT or additional static scan images are important. Therefore, in this study, various improvement activities have been carried out in order to enhance the work capacity of technologists. In this study, we investigate the effect of technologist training and standardized work process processes on bone scan error reduction. Materials and Methods Several systems have been introduced in sequence for the application of new processes. The first is the implementation of education and testing with physicians, the second is the classification of patients who are expected to undergo further scanning, introducing a pre-filtration system that allows technologists to check in advance, and finally, The communication system called NMQA is applied. From January, 2014 to December, 2016, we examined the whole body bone scan patients who visited the Department of Nuclear Medicine, Asan Medical Center, Seoul, Korea Results We investigated errors based on the Bone Scan NMQA sent from January 2014 to December 2016. The number of tests in which NMQA was transmitted over the entire bone scan during the survey period was calculated as a percentage. The annual output is 141 cases in 2014, 88 cases in 2015, and 86 cases in 2016. The rate of NMQA has decreased to 0.88% in 2014, 0.53% in 2015 and 0.45% in 2016. Conclusion The incidence of NMQA has decreased since 2014 when the new process was applied. However, we believe that it will be necessary to accumulate data continuously in the future because of insufficient data until statistically confirming its usefulness. This study confirmed the necessity of standardized work and education to improve the quality of Bone Scan image, and it is thought that update is needed for continuous research and interest in the future.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.33 no.4
• /
• pp.304-312
• /
• 2013

This study was conducted to investigate the effect of total neutral detergent fiber (NDF) and forage-derived NDF (fNDF) on nutrient intake and milk production in Holstein dairy cows. Thirty-six Holstein dairy cows at weeks 4 to 20 of lactation were included in this study. The cows were arranged in a randomized complete block design and assigned to one of six diets: 1) 38% NDF with 18% fNDF (HN-HF); 2) 38% NDF with 15% fNDF (HN-MF); 3) 38% with 12% fNDF (HN-LF); 4) 34% NDF with 18% fNDF (LN-HF); 5) 34% NDF with 15% fNDF (LN-MF); and 6) 34% with 12% fNDF (LN-LF). The cows were fed a total mixed ration twice daily (07:00 and 18:00 h) and given ad libitum access to feed and water throughout the experiment. Data on the intake of nutrients (DM, NEl, CP, NDF, fNDF, NFC), milk yield, composition, fat-corrected milk (FCM), fat and protein corrected milk (FPCM), and energy corrected milk (ECM) were analyzed. Lower dietary concentrations of total NDF or fNDF resulted in an increase in DM, NEl, and NFC intake (p<0.01), milk yield (p<0.05) and a lower milk fat concentration (p<0.01). The LN treatment showed no significant differences in milk fat concentration compared to the HN however, further reduction in fNDF decreased milk fat content (p<0.01). The lowest level of milk fat was observed in the LN-LF diet group. Changes in the dietary concentrations of NDF or fNDF did not affect the concentrations of milk protein or SNF (solid not fat), although the yield of milk protein and SNF increased with higher milk yield (p<0.01). The level of fNDF influenced the level of FCM (p=0.07), as well as FPCM and ECM yield (p<0.05). A highly positive correlation between fNDF intake and milk fat concentration was observed in animals with low NDF compared to those offered high NDF. A strong correlation was also observed between milk yield and low NDF intake compared to high NDF intake.

• Korean Journal of Food Science and Technology
• /
• v.42 no.2
• /
• pp.233-239
• /
• 2010

This study was conducted to examine the anticancer activities of Berberis koreana extracts according to different extraction processes. The highest extraction yield obtained was 8.26% following extraction by ultrasonification at 60 kHz and $60^{\circ}C$ followed by high pressure at 500MPa. Generally, the extracts from the ultrasonification process showed relatively low cytotoxicities against the human normal cell line, HEK293 showing as low as 15%. This extract inhibited the growth of the digestive related organs cell lines, human stomach adenocarcimoma cell and human epithelial adenocarcinoma cell by up to 80% when administered at 1.0 mg/mL, and showed 2.5-3.5 of selectivity. It was also found that this extract induced the production of nitric oxide levels as high $37.87\;{\mu}M$ from macrophages. For the in vivo experiment using ICR mice, the total serum IgG levels of mice treated with B. koreana extracts from ultrasonification extraction were increased by up to 57 ng/mL. The survival time of this group was longer than that of the other group after the injection of Sarcoma-180 and the increment of their body weights was also greatly suppressed. In addition, the extract showed the highest tumor inhibition activities, leading to a reduction of 78.47%. These results indicate that the highest activities of B. koreana associated with this extraction process can be significantly improved.

• Korean Journal of Food Science and Technology
• /
• v.49 no.4
• /
• pp.430-437
• /
• 2017

The protective effect of Pteridium aquilinum on high glucose-induced cytotoxicity was examined in vitro to investigate the relationship between diabetic condition and neuronal dysfunction. The ethyl acetate fraction of P. aquilinum (EFPA), with total phenolic content of 265.08 mg gallic acid equivalent/g, showed higher 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulphonic acid)/2,2-diphenyl-1-picrylhydrazyl radical scavenging activities and lipid peroxidation inhibitory effect than any other fraction. In addition, EFPA showed a significant reduction in the inhibitory effect on ${\alpha}$-glucosidase activity ($IC_{50}$ value=$205.26{\mu}g/mL$) compared to the acarbose positive control. The anti-oxidative effect in PC12 cells, protective effects on high glucose-induced oxidative stress in neuronal cells, and neurotoxicity were measured using 2',7'-dichlorofluorescin diacetate, 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl-tetrazoliumbromide, and lactate dehydrogenase assays, respectively. EFPA showed conspicuous inhibitory effect on cellular reactive oxygen species production and neuronal cell apoptosis. Finally, kaempferol-3-glucoside was identified as the main phenolic compound of EFPA using high performance liquid chromatography.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.17 no.2
• /
• pp.93-103
• /
• 1981

It is well-known that nowadays heat resisting and anti-corrosive materials have been widely used as the components materials of gas turbines, nuclear power plants and engines etc. In the fields of machine production industry. And materials for engine components, like as the exhaust valve of internal combustion engine, have been required to operate under the high temperature range of $700^{\circ}C$-$800^{\circ}C$ and high pressured gas with repeated mechanical load for the high performance of engines. For these components, friction welding for bonding of dissimilar steels can be applied for in order to obtain process shortening, production cost reduction and excellent bonding quality. And age hardening recently has been noticed to the heat resisting materials for further strengthening of high temperature strength, especially high temperature fatigue strength. However, it is difficult to find out any report concerning the effects of age hardening for strengthening high temperature fatigue strength to the Friction welded heat resisting and anti-corrosive materials. In this study the experiment was carried out as the high temperature rotary bending fatigue testing under the condition of $700^{\circ}C$ high temperature to the friction welded domestic heat resisting steels, SUH3-SUS303, which were 10hr., 100hr. aging heat treated at $700^{\circ}C$ after solution treatment 1hr. at $1, 060^{\circ}C$ for the purpose of observing the effects of the high temperature fatigue strength and fatigue fracture behaviors as well as with various mechanical properties of welded joints. The results obtained are summarized as follows: 1) Through mechanical tests and micro-structural examinations, the determined optimum welding conditions, rotating speed 2420 rpm, heating pressure 8kg/mm super(2), upsetting pressure 22kg/mm super(2), the amount of total upset 7mm (heating time 3 sec and upsetting time 2 sec) were satisfied. 2) The solution treated material SUH 3, SUS 303, have the highest inclination gradient on S-N curve due to the high temperature fatigue testing for long time at $700^{\circ}C$. 3) The optimum aging time of friction welded SUH3-SUS 303, has been recognized near the 10hr. at $700^{\circ}C$ after the solution treatment of 1hr. at $1, 060^{\circ}C$. 4) The high temperature fatigue limits of aging treated materials were compared with those of raw material according to the extender of aging time, on 10hr. aging, fatigue limits were increased by SUH 3 75.4%, SUS 303 28.5%, friction welded joints SUH 3-SUS 303 44.2% and 100hr. aging the rates were 64.9%, 30.4% and 36.6% respectively. 5) The fatigue fractures occurred at the side of the base matal SUS303 of the friction welded joints SUH 3-SUS 303 and it is difficult to find out fractures at the friction welding interfaces. 6) The cracking mode of SUS 303, SUH 3-303 is intergranular in any case, but SUH 3 is fractured by transgranular cracking.

• Korean Journal of Food Science and Technology
• /
• v.34 no.6
• /
• pp.1030-1035
• /
• 2002

Despite health benefits derived from fish oil, polyunsaturated fatty acids (PUFAs) contained in fish oil are susceptible to lipid oxidation. To determine the optimum condition for maintaining good quality cooked fish during storage, mackerels were broiled with salt or soysauce condiments, and the lipid oxidation during 12 days of storage at refrigerated condition was measured. Peroxide value of broiled mackerel group with salt significantly increased after immediate cooking and maintained higher value throughout the storage period compare to the soysauce-added group, but showed similar value to the control group. Conjugated diene content in the soysauce-group was lower than the control and salt-added groups. Malondialdehyde content of broiled mackerel increased twofold and showed similar values in soysauce-added and the control groups during storage, whereas increased in the salt-added group significantly. Fatty acid compositions of the three mackerel groups changed after cooking, whereas that of the control group was almost stable during storage. In comparison with raw mackerel, the ratio of PUFA and saturated fatty acids decreased significantly, and the content of n-3 family fatty acid decreased from 25.53 to 20.63% in salted broiled mackerel. Soysauce group showed no reduction of PUFA with increasing storage time and showed the highest ratio of n-3/n-6 among the three groups at 10 days storage. Results reveal soysauce condiment protects against lipid peroxidation of broiled mackerel. Maillard reaction products (MRPs) found in soysauce might be responsible for the inhibitory effect and is a good condiment for extending storage life of cooked fish containing high amount of PUFA.

• Journal of Energy Engineering
• /
• v.28 no.3
• /
• pp.65-79
• /
• 2019

The study attempted to estimate the optimal facility capacity by combining renewable energy sources that can be connected with gas CHP in industrial complexes. In particular, we reviewed industrial complexes subject to energy use plan from 2013 to 2016. Although the regional designation was excluded, Sejong industrial complex, which has a fuel usage of 38 thousand TOE annually and a high heat density of $92.6Gcal/km^2{\cdot}h$, was selected for research. And we analyzed the optimal operation model of CHP Hybrid System linking fuel cell and photovoltaic power generation using HOMER Pro, a renewable energy hybrid system economic analysis program. In addition, in order to improve the reliability of the research by analyzing not only the heat demand but also the heat demand patterns for the dominant sectors in the thermal energy, the main supply energy source of CHP, the economic benefits were added to compare the relative benefits. As a result, the total indirect heat demand of Sejong industrial complex under construction was 378,282 Gcal per year, of which paper industry accounted for 77.7%, which is 293,754 Gcal per year. For the entire industrial complex indirect heat demand, a single CHP has an optimal capacity of 30,000 kW. In this case, CHP shares 275,707 Gcal and 72.8% of heat production, while peak load boiler PLB shares 103,240 Gcal and 27.2%. In the CHP, fuel cell, and photovoltaic combinations, the optimum capacity is 30,000 kW, 5,000 kW, and 1,980 kW, respectively. At this time, CHP shared 275,940 Gcal, 72.8%, fuel cell 12,390 Gcal, 3.3%, and PLB 90,620 Gcal, 23.9%. The CHP capacity was not reduced because an uneconomical alternative was found that required excessive operation of the PLB for insufficient heat production resulting from the CHP capacity reduction. On the other hand, in terms of indirect heat demand for the paper industry, which is the dominant industry, the optimal capacity of CHP, fuel cell, and photovoltaic combination is 25,000 kW, 5,000 kW, and 2,000 kW. The heat production was analyzed to be CHP 225,053 Gcal, 76.5%, fuel cell 11,215 Gcal, 3.8%, PLB 58,012 Gcal, 19.7%. However, the economic analysis results of the current electricity market and gas market confirm that the return on investment is impossible. However, we confirmed that the CHP Hybrid System, which combines CHP, fuel cell, and solar power, can improve management conditions of about KRW 9.3 billion annually for a single CHP system.