• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 춘계학술대회 논문집
• /
• pp.242-242
• /
• 2013

Recently, importance of working environment is increased in commercial vessel and offshore structure. Marine facility design and ambient environment condition are influenced to enhancing human performance and reducing human errors. Consequently, the quality of accommodation where offshore facility crews sleep, eat and relax will influence their job performance and overall sense of comport and well-being. Therefore, adequate acoustic isolation between adjacent spaces is normally required to achieve satisfactory internal noise levels, acoustic privacy and speech intelligibility. In this study, the reverberation time is investigated in the public areas where there are not provided the information of material's noise reduction coefficient (NRC). The experiment of reverberation time is rarely performed for the various type public areas in a marine structure. Therefore, the reverberation time in a vessel is investigate in order to evaluate the room's noise reduction coefficient (NRC) in a public area.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2010년도 춘계 학술대회 제22권1호
• /
• pp.421-422
• /
• 2010

건설공사에서 콘크리트의 조기강도 확보를 통한 거푸집 탈형시기의 결정은 공기단축 및 경제성 측면에서 중요한 기술이다. 이에 본 연구에서는 실용적인 콘크리트 재료와 소요의 압축강도 기준을 만족하는 조강 콘크리트 배합을 개발한 후 현장 적용함으로써 실용화를 목표로 콘크리트의 조기강도발현기술을 개발하고자 한다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.205-209
• /
• 2007

During after the Industrial Revolution until now, as many of working machinery and tool had been invented, human could save man power and time. However, because such instruments generate a loud noise according to their use-purposes and dimensions, they are affecting a physical, mental bad influences to those workers. Therefore, while a reduction measure against the instrument-noise that generates at workshop is sincerely necessitated, due to lack of the research and data concerned with that, a lot of difficulties are on suffering. Standing on such point of view, this Study has measured analyzed the characteristics of diverse instrument-noises generate at workplace, and would intends to present a fundamental material for establishment more comfortable working environment by prediction on the noise in loud noise workshop, based on the above.

• 화약ㆍ발파
• /
• 제31권2호
• /
• pp.32-39
• /
• 2013

일반적으로 장공발파 방법은 과거 대규모 채탄막장이나 댐 기초굴착, 광산 등에서 행하여져 왔으나, 최근 우리나라에서 신설되는 토목터널에서 시공 효율성 및 경제성을 목적으로 많이 실시되고 있다. 고속국도제 600호선 부산외곽 고속도로 ${\bigcirc}$공구 또한 총연장 약 8km의 4차선 대단면 도로 터널로서 Type I, II, 4.4m 장공발파를 실시하는 현장이다. 그러나 당 현장에서는 발파 후 굴진율이 약 75%에 그쳐 발파 후속작업 시간에 영향을 미치게 되고 그로 인하여 전체 작업공정 시간이 증가하여 계획된 굴진을 못하는 현상이 자주 발생되었다. 본 논문에서는 당 현장에서 위 문제를 극복하기 위하여 실시된 장공발파 공법 중 천공경과 가장 밀장전 할 수 있는 ${\phi}36mm$폭약을 적용하여 굴진효율을 향상시키고 작업공정 시간을 단축시킨 사례를 소개하고자 한다.

• International Journal of Human Ecology
• /
• 제13권2호
• /
• pp.53-67
• /
• 2012

This study uses the 1999-2009 Korean Time Use Survey to explore how mothers' employment affects parental time spent in activities that may relate to their children's weight. Specifically, it estimates two-part regression models to assess the effects of maternal employment upon the amount of time mothers spend in activities potentially related to their preschool children's eating and physical activity. The findings suggest that working mothers and those mothers who work longer hours allocate significantly less time in food preparation, eating with the child, and supervising the child's physical activity than mothers who are not employed and those who work fewer hours. The paper also finds that spouses of working mothers do not allocate more time to these activities to offset the reduction in mothers' time. Also, using local unemployment rates as instrumental variables, maternal employment is found to allow mothers to spend significantly more time on food preparation and family meals, although its effect on mothers' total childcare time is negative. Several aspects of Korean society may have made the relationship between maternal employment and childhood weight issues different from what was found in other countries.

• 한국건축시공학회지
• /
• 제10권5호
• /
• pp.87-94
• /
• 2010

건설공사는 현장을 중심으로 이루어지고 있어 공사계획초기 수립된 공기가 공기지연요인에 의하여 지연 또는 연장이 발생하게 되면 건설사는 클레임 등의 위험부담을 안고 있어 공기단축을 통해 공사 준공일 내에 목적물을 완공한다. 이에 광주광역시 내 공동주택 현장의 기술자들을 대상으로 공정관리 실태 및 공기단축의 필요성, 목적, 방법에 관한 인식을 파악해보았고 그 결과 타 지역에 비하여 공정관리전담부서 편성이 미흡하고 전문 인력이 부족함을 알았고, 공기단축의 필요성은 높게 인식된 반면 공사비 절감과의 관계는 낮게 인식되었다. 단축목적으로는 공기연장에 대비, 각종 클레임에 대처를 높게 인식하였으며 단축방법으로는 작업시간연장 및 작업원 증가를 통해 단축하겠다고 하였다. 이에 본 연구는 기술자들로 하여금 공기단축은 단순히 공기지연을 만회하기 위한 것이 아니라 원가절감을 통한 생산성 향상 및 대외 경쟁력 확보와 밀접한 관련성이 있다고 인식되어지길 기대한다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2015년도 춘계 학술논문 발표대회
• /
• pp.117-118
• /
• 2015

These days buildings have more possibilities to occur construction delay as many variables and risks are inherent in them due to the enlargement and complexity. When a project is delayed, it generates extra working expenses and this causes a dispute between the employer and the constructor. Most construction sites conduct emergency construction work to recover the delay of the project duration. When an emergency construction is carried out in the actual construction site, it's necessary to utilize and distribute the proper working groups based on the procedure of successor and predecessor. Many constructions, however, have been going only with more number of work forces and working time. This study suggests a process management optimization plan with an application of emergency construction scenario by using linear programing.

• 한국정밀공학회지
• /
• 제31권7호
• /
• pp.597-604
• /
• 2014

High efficiency production requires the improved performance of CAD/CAM system. Although the CAD and CAM have been significantly developed over the last three decades, they must still study on the reuse of information during process. In this study, we developed a new integrated CAD/CAM system which can reuse the information generated in previous processes, in order to improve its performance. In addition, the developed system was verified by comparing with working-time, and system reproducibility was also examined with tolerance in the unmanned operation. Experimental results showed 58% reduction in working-time of 2D Auto-CAM module, 80% in case of 3D Auto-Exchange module, and 54.5% in case of Auto-Design module.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.212-216
• /
• 2006

The purpose of this study is to obtain an effective enclosing method for noise reduction of press machine operating in a manufacturing company located in Korea. Noise level of the machine is about $90{\sim}105dB$ which is higher than legal standards by industrial safety and health law. This study has predicted the level of noise reduction according to a step by step prevention plan by considering the characteristics of the cause of noise, the permitted limit of noise levels, problems and economical efficiency attendant upon the noise prevention measures. The predicted level of noise at the plant in accordance with the first step is $71.5{\sim}89.5dB(A)$, and can satisfy the permitted limit of noise in a time period of the day. Based on these results, enclosing method adequate for the selected plant's noise characteristics were suggested.

• Journal of Advanced Marine Engineering and Technology
• /
• 제23권5호
• /
• pp.679-686
• /
• 1999

This study is to investigate the effect of a substantial drag reduction caused by the polymer(A611P) when the working fluids flow to the vertical direction in the vertical cylindrical equipment of closed flow system. The drag reduction is associated with the mechanical degrada-tion thermal degradation and heat transfer. By ignore the heat fluxs within the closed system the pressure drop due to the polymer concentration the flow velocity and flow time have been mea-sured. By taking into account the mechanical and thermal degradation in the closed system an experiment has been focused on the determination of the condition which could improve the pump capacity in the heat union electric power plant. Under the condition of non-boiling it has been found out that the change of heat flux has little influence on the drag reduction.