• 한국공간구조학회논문집
• /
• 제7권2호
• /
• pp.63-74
• /
• 2007

대공간구조물은 쉘, 스페이스프레임, 막등의 지붕구조와 이를 지지하는 RC조등의 지지구조로 이루어져 있다. 이에, 단순화를 위해서 지붕구조를 상부구조라 부르고, 지지구조를 하부구조라고 한다. 본 논문에서는 하부구조가 상부구조의 지진응답에 미치는 영향을 고찰함을 그 목적으로 하고 이를 위한 기초적인 연구를 수행하였다. 상부구조와 하부구조를 각각 고유의 진동특성을 가지고 있는 단자유도계로 보고 그 각각의 독립구조물이 연결되어 하나의 2질점계 구조물을 형성한다고 가정하였다. 상부구조물이 1질점계 단독으로 존재할 때의 지진응답과 2 질점계의 상부구조로서 존재할 경우의 지진응답을 비교함으로써 그 영향을 고찰할 수 있었다. 본 논문에서는, 상부구조와 하부구조의 질량비 및 주기비가 하부구조가 상부구조에 미치는 영향을 고려할 때 중요한 설계변수가 됨을 나타내었다.

• 한국시뮬레이션학회논문지
• /
• 제19권1호
• /
• pp.13-22
• /
• 2010

본 논문에서는 해상 크레인이 인양하는 중량물의 운동 감쇠를 위하여 Tagline을 이용한 PD제어를 수행하였다. 해상 크레인 및 중량물을 각각 6자유도 운동을 하는 강체로 가정하고 뉴턴의 제 2법칙에 따라 운동 방정식을 유도하였다. 중량물의 운동을 감쇠하기 위한 제어 메커니즘으로 Tagline을 사용 하였고, 해상 크레인의 Deck에 설치한 Winch로 Tagline의 장력을 조절하였다. 장력을 조절하는 제어 알고리즘으로는 PD제어를 사용 하였다. 이를 바탕으로 수치적 제어 시뮬레이션을 수행하였다. 또한, 1/100 Scale의 모형 해상 크레인을 제작하고 실험을 통해 제어 시뮬레이션의 결과를 검증 하였다. 제어 시뮬레이션과 모형 시험 수행 결과 Tagline을 이용한 제어가 중량물의 운동을 감쇠시키는데 효과가 있음을 알 수 있었다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1997년도 추계학술대회 논문집
• /
• pp.316-321
• /
• 1997

The purpose of this study is to reduce the vibration noise of differential gear by reducing torque fluctuation of drive pinion shaft which causes vibration noise of differential gear in rear wheel drive vehicles. For this we developed multi-degree of freedom analysis model in which mass moment of inertia and torsional spring combined, the validity of the simulation model was checked by the field test and we examined the influence of torsional vibration of driveline elements by performing forced vibration analysis of engine excitation torque. We studied the methods for reducing torsional vibration of driveline according to the design factor of propeller shaft and examined the effects reducing vibration differential gear by applying flexible coupling.

• Geomechanics and Engineering
• /
• 제15권1호
• /
• pp.669-676
• /
• 2018

The "pseudo-wedge" failure is a name for a complex instability occurring at the Sarcheshmeh open-pit mine (Iran). The pseudo-wedge failure contains both the rock bridge failure and sliding along pre-existing discontinuities. In this paper, a cross section of the failure area was first modeled using a bonded-particle method. The results indicated development of tensile cracks at the slope toe which explains the freedom of pseudo-wedge blocks to slide. Then, a three-dimensional discrete element method was used to perform a block analysis of the instability. The technique of shear strength reduction was used to calculate the factor of safety. Finally, the influence of geometrical characteristics of the mine wall on the pseudo-wedge failure was investigated. The safety factor significantly increases as the dip and dip direction of the wall decrease, and reaches an acceptable value with a 10-degree decrease of them.

• 한국생산제조학회지
• /
• 제20권3호
• /
• pp.322-328
• /
• 2011

This paper presents inverse kinematics and workspace analysis of a planar three degree-of-freedom (DOF) parallel manipulator. Furthermore, optimization problem of the manipulator is presented. The manipulator adopts PRR (Prismatic-Revolute-Revolute) mechanism and the prismatic actuators are fixed to the base. This leads to a reduction of the inertia of the moving links and hence enables it to move with high speed. The actuators are linear electric motors. First, the mechanism based on the geometry of the manipulator is introduced. Second, a workspace analysis is performed. Finally, design optimization is carried out to have large workspace. The proposed approach can be applied to the design optimization of various three DOF parallel manipulators in order to maximize their workspace. The performance of mechanism is improved and satisfies the requirements of workspace to align micro-components.

• 대한기계학회논문집A
• /
• 제24권2호
• /
• pp.535-542
• /
• 2000

This paper presents a method for the dynamic analysis of constrained multibody systems undergoing abrupt collision. The proposed method uses a longer time interval to check collision than that of c onventional method. This reduces the computational effort significantly. To calculate collision points on two colliding rigid bodies, one may introduce constraints of contact. However, this causes reduction of degree of freedom and difficulty of numerical analysis. The proposed method can calculate collision points without above mentioned problems. Three numerical examples are given to demonstrate the computational efficiency and the usefulness of the proposed method.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.535-539
• /
• 2001

In these days. the finite element method(FEM) is a very common method for not only a simple vibration analysis but also the optimization of structures. Since the finite element model may contain thousands of degree of freedom, the eigensolutions require extreme computing power, which will result in a serious time-consuming problem. Thus, many researchers have challenged to find more improved modeling techniques and calculating methods to overcome such problems. The Guyan reduction method and the substructure synthesis method are typical examples of such methods. Of the substructure synthesis method, the component mode synthesis method (CMS) is widely used for dynamic analysis of structure. In this study. for the efficient analysis of jet loom structure. Component Mode Synthesis was carried out. The results of the finite element program developed are compared with those of the commercial package program ANSYS for the validation of the program. The results obtained by the program showed a good agreement with those of ANSYS. The program will be further refined and verified by test to yield more accurate results.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2007년도 정기 학술대회 논문집
• /
• pp.607-612
• /
• 2007

A conventional passive TMD is only effective when it is tuned properly. In many practical applications, inevitable off-tuning of a TMD occurs because the mass in a building floor could change by moving furnishings, people gathering, etc. When TMDs are off tuned, TMDs their effectiveness is sharply reduced. This paper discusses the application of MR-TMD, semi-active damper, for the reduction of floor vibrations due to machine and human movements. Here, the groundhook and skyhook algorithm are applied to a single degree of freedom system representative of building floors. And displacement and velocity base control method are applied to reduce t100r vibration. The performance of the STMD is compared to that of the equivalent passive TMD. Comparison of the results demonstrates the efficiency and robustness of STMD with respect to equivalent TMD.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송∙미디어공학회 2019년도 추계학술대회
• /
• pp.259-260
• /
• 2019

MPEG-I Visual group is actively working on enhancing immersive experiences with up to six degree of freedom (6DoF). In virtual space of 3DoF+, which is defined as an extension of 360 video with limited changes of the view position in a sitting position, looking at the scene from another viewpoint (another position in space) requires rendering additional viewpoints using multiple videos taken at the different locations at the same time. In the MPEG-I Visual workgroup, methods of efficient coding and transmission of 3DoF+ video are being studied, and they released Test Model for Immersive Media (TMIV) recently. This paper presents the enhanced clustering method which can pack the patches into atlas efficiently in TMIV. The experimental results show that the proposed method achieves significant BD-rate reduction in terms of various end-to-end evaluation methods.

• 한국자동차공학회논문집
• /
• 제7권9호
• /
• pp.131-137
• /
• 1999

Under magnetism , as the magneticfluid is being itself magnetized, increase the apparent viscosity because of its body force and has the magnetic characteristics in response ot magnetism, the magnetic fluid is getting attention in various field. The magnetic fluid has the fluidity, which is a special characteristics of fluid and the magneticism , which is a special one of solid. Using this characteristics, this study has been proceeded to show the basic data for developing of a viscous damper with magnetism fluid as hydraulic fluid. Experimental study shows that the application of magnetic field is effective reducing the resonance characteristics of the spring-mass system.