• 대한치과교정학회지
• /
• 제30권3호
• /
• pp.367-375
• /
• 2000

하악전돌증(mandibular prognathism or mandibular prognathic patient) 환자의 경우 전후방과 수직적 악골(maxilla)의 부조화정도가 심하거나 안면측모(facial profile)에 대한 심미적 인식도가 클 때에는 교정치료만으로는 심미적으로 만족한 결과를 얻기가 어려우므로 악교정수술(orthognathc surgery)과 병행되어야만 한다. 이럴 경우 심미적인 개선은 환자의 치료결과에 대한 만족도에 중요한 요소가 되고 있지만 미에 대한 기준을 객관화하는데는 많은 문제점을 갖고 있어 그 평가도 환자자신의 주관적인 관점에 의하여 내려지게 된다. 우리나라의 경우 얼굴심미에 대한 기준이 서구인의 외형을 선호하는 경향이 있어 전통적인 둥그런 얼굴보다는 달걀형의 갸름한 얼굴모양을 선호한다. 이 연구는 하악전돌증으로 인한 악교정수술결과 술후 얼굴폭이 넓어져 수술전보다 얼굴의 모양이 둥그렇게 되었다고 호소하는 환자가 있어 시도하게 되었다. 악교정수술전후의 안모길이 및 폭경의 변화에 관한 연구를 위하여 하악전돌증을 주소로 악교정수술을 받은 총 14명 환자(남자 8명, 여자 6명)의 정모두부방사선사진 계측(skull PA analysis)과 설문조사를 통하여 수술후의 안모변화 및 환자의 만족도에 대한 분석을 시행하여 다음과 같은 결론을 얻었다. 1. 14명의 환자중 3명($21.4\%$)이 얼굴이 넓어졌다고 답하였다. 2. 악교정수술(orthognathic surgery)후 하악골폭경 (mandibular width)은 A군은 변화가 없었으며, B군은 0.7mm 감소하였고, 안면폭경 (zygomatic width)은 A군에서는 0.45mm, B군에서는 0.66mm의 증가를 보였다. 3. 악교정수술후 얼굴길이의 변화는 A군에서는 상안면 고경(upper facial height)이 0.52mm증가, 하안면고경(lower facial height)이 1.19mm감소, 하악골 고경(mandibular height)이 0.7mm감소하였으며, B군에서는 상안면 고경이 0.67mm 감소, 하안면고경이 3.66mm 감소, 하악골 고경이 5mn감소하였다. 4. 수술후 안면폭경에 대한 안면고경(facial height)의 비율은 A군에서 $1.5\%$, B군에서 ,$3.6\%$ 감소하였다. 5. 수술후 안면폭경에 대한 하악골 길이(mandibular height)의 비율은 A군에선 $1.3\%$, B군에서 $4.4\%$ 감소하였다. 6. 수술후 하악골폭경에 대한 하악골 길이(mandibular height)의 비율은 A군에서 $1.3\%$, B군에서 $4.3\%$ 감소하였다. 7. 수술로 인한 얼굴폭의 변화는 무시할만한 것으로 판단되나 수술후 얼굴의 길이가 짧아져 상대적으로 얼굴의 폭이 넓어보일 수 있으므로 수술시 이에 대한 충분한 고려 및 환자에 대한 설명이 있어야 한다.

• 소성∙가공
• /
• 제20권5호
• /
• pp.339-343
• /
• 2011

This paper presents methods for analyzing the extent of cylindrical-shaped void closure. In addition, a quantitative relationship between change in void fraction and height reduction ratio of a compressed specimen is proposed. The height reduction ratio, number of deformation steps and billet rotation were chosen as key process parameters influencing the void closing behavior, namely, the changes in void shape and size during hot open die forging of a large ingot. The extent of void closure was analyzed from microscopic observations and estimated from tensile test results. The tensile strengths of specimens with closed voids and those without were compared for various reduction ratios in height. The results confirmed that void closure occurs at reduction ratios greater than 30 %. The void closing behavior could be expressed as a hyperbolic tangent function of reduction ratio in height, number of paths, and billet rotation. The knowledge presented in this paper could be helpful for optimizing deformation paths in open die forging processes.

• 소성∙가공
• /
• 제19권8호
• /
• pp.480-485
• /
• 2010

In this work, the closing behavior of cylindrical-shaped voids was experimentally investigated according to various parameters such as reduction ratio in height, initial void size and billet rotation during hot open die forging process. The reduction ratio in height, number of path, and billet rotation were chosen as key process parameters which influence the void closing behavior including the change of void shape and size. On the other hand, values of die overlapping and die width ratio were set to be constant. Void closing behavior was estimated by microscopic observation. Based on the observations, it was confirmed that application of billet rotation is more efficient to eliminate the void with less reduction ratio in height. The experimental results obtained from this study could be helpful to establish the optimum path schedule of open die forging process.

• Tribology and Lubricants
• /
• 제34권6호
• /
• pp.226-234
• /
• 2018

Copper chemical mechanical planarization (CMP) has become a key process in integrated circuit (IC) technology. The results of copper CMP depend not only on the mechanical abrasion, but also on the slurry chemistry. The slurry used for Cu CMP is known to have greater chemical reactivity than mechanical material removal. The Cu CMP slurry is composed of abrasive particles, an oxidizing agent, a complexing agent, and a corrosion inhibitor. Citric acid can be used as the complexing agent in Cu CMP slurries, and is widely used for post-CMP cleaning. Although many studies have investigated the effect of citric acid on Cu CMP, no studies have yet been conducted on the interfacial friction characteristics and step height reduction in CMP patterns. In this study, the effect of citric acid on the friction characteristics and step height reduction in a copper wafer with varying pattern densities during CMP are investigated. The prepared slurry consists of citric acid ($C_6H_8O_7$), hydrogen peroxide ($H_2O_2$), and colloidal silica. The friction force is found to depend on the concentration of citric acid in the copper CMP slurry. The step heights of the patterns decrease rapidly with decreasing citric acid concentration in the copper CMP slurry. The step height of the copper pattern decreases more slowly in high-density regions than in low-density regions.

• 한국환경과학회지
• /
• 제25권10호
• /
• pp.1407-1415
• /
• 2016

In this study, we investigated the relationship between noise reduction and the community structure of nine groups of typical plant communities as well as the reduction in noise at different frequencies. The semantic differential method was adopted to explore the perception of noise reduction. The results indicated that there was a significantly positive correlation between noise reduction and coverage, a significantly negative correlation between noise reduction and bifurcate height, and a negative correlation between noise reduction and bare rate. However, there was no significant correlation between noise reduction and height, diameter at breast height, or crown width. The reduction of middle-frequency noise was better than that of low- and high-frequency noise. The indicators "quiet" and "calm" showed that plant communities could reduce the noise perceived by humans. However, overly dense woodland caused nervousness, fear, depression, and other negative effects. Relatively open environments and those with large forest gaps obtained the highest evaluation.

• 대한디지털의료영상학회논문지
• /
• 제14권2호
• /
• pp.33-38
• /
• 2012

In EVAR procedure using long time C-arm, we studied exposure dose reduction and effeciency through measuring surgical staff's ESD by installing lead curtain operating table next to. The height 3 the spot (50cm, 100cm, 150cm) dose was measured on 2 locations for 600sec in the X-ray radiation considering the surgical staff's movement. To install the curtains, we compared before and after the dose. As a result, it can confirm that dose of the installation former of 50cm height and after is reduced about 75% and 91% in 2 locations. In 100cm height, the reduction of the dose was a bit confirmed. There as to dose value, measured on 150cm height the installation former and after was nearly no change. This research examined the exposure dose about the radiation of the surgical staff during EVAR procedure in which the operation time is the long time. It was implemented in the object that it reduces the radiation exposure. It could confirm the certain effect of the experimental result exposure dose reduction In EVAR procedure using long time C-arm, we studied exposure dose reduction and effeciency through measuring surgical staff's ESD by installing lead curtain operating table next to. The height 3 the spot (50cm, 100cm, 150cm) dose was measured on 2 locations for 600sec in the X-ray radiation considering the surgical staff's movement. To install the curtains, we compared before and after the dose. As a result, it can confirm that dose of the installation former of 50cm height and after is reduced about 75% and 91% in 2 locations. In 100cm height, the reduction of the dose was a bit confirmed. There as to dose value, measured on 150cm height the installation former and after was nearly no change. This research examined the exposure dose about the radiation of the surgical staff during EVAR procedure in which the operation time is the long time. It was implemented in the object that it reduces the radiation exposure. It could confirm the certain effect of the experimental result exposure dose reduction.

• Archives of Plastic Surgery
• /
• 제36권3호
• /
• pp.327-332
• /
• 2009

Purpose: Several methods of the nipple reduction have been reported. However, the methods described previously are difficult or have some demerits. This study proposes a simple technique for reduction of the nipple height as well as diameter. Methods: The purposed nipple height is marked. A pentahedral design of excision was marked around the nipple. Local anesthetic solution was infiltrated and a 4 - 0 Nylon traction suture was applied at the nipple apex. Excision of the nipple inside both two triangles and a rectangle was made. Remaining two flaps were approximated using 5 - 0 Nylon simple interrupted sutures. However, a part of wound closure was not done in the central area of the nipple. Results: 83 patients(166 nipples) underwent this procedure from December 1999 to December 2008. Follow up ranged from 6 months to 2 years with a mean of 10 months. 78 patients were female and 5 patients were male. No major complication occurred and remaining scars were very inconspicuous. Conclusion: This simple technique has the advantage of nipple reduction in both height and diameter, and provides good aesthetic outcomes.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 춘계 학술논문 발표대회
• /
• pp.56-57
• /
• 2017

In recent years, new construction methods have been required to reduce the construction cost and increase the available area in an environment where construction work is frequently performed in a narrow urban area like Korea. As a result of these studies, slim floor composite beam has been suggested. Slim floor composite beam can reduce required depth because web of steel beam is embedded in the slab, so it is effective to reduce floor height and increase the available area. The purpose of this study is the floor height reduction evaluation by comparing system consisting of reinforced concrete, steel, and slim floor using square-shape steel pipe. After doing structural design for a typical plan, checked effectiveness by comparing each design plan. It is proven that slim floor composite beam can reduce required depth effectively comparing required materials of other system.

• Journal of Korean Neurosurgical Society
• /
• 제39권2호
• /
• pp.92-95
• /
• 2006

Objective : Severe vertebral body collapse [vertebra plana] is considered a contraindication to vertebroplasty by most authors. The purpose of this study is to determine the efficacy of vertebroplasty in treating severe compression fracture patients with osteoporosis. Methods : 16 patients underwent 18 vertebroplasties following postural reduction for vertebra plana. The fractures were defined vertebrae that have collapsed to more than 75% of their original height. Imaging and clinical features were analyzed, including involved vertebrae level, vertebral height after postural reduction for 2 days, injected cement volume, clinical outcome and complications. Results : Involved veretebra were located from level T7 to L4. Vertebral body collapse averaged 79% [range $12{\sim}25%$] of the original height. After pillow reduction for 2 days, vertebral body height increased 35% of the original height [range $15{\sim}45%$]. The kyphotic wedge was $12^{\circ}$ before procedure and was decreased $7.0^{\circ}$ after vertebroplasty. The mean injected cement volume was 3.8ml [range $2.0{\sim}4.9ml$]. After the procedure, surgical outcome was excellent in 8 [50%] of 16 patients, good in 7 [42%] and unchanged in one [8%]. The mean pain score [VAS score] prior to vertebroplasty was 8.3 and it changed 3.2 after the procure. Cement leakage to the adjacent disc [5 cases] and paravertebral soft tissues [4 cases] developed but there were no major complications. Conclusion : We propose that vertebra plana due to osteoporosis is not a contraindication to vertebroplasty. Vertebroplasty following postural reduction for severe compression fracture is safe and effective treatment.

• KIEAE Journal
• /
• 제7권6호
• /
• pp.107-112
• /
• 2007

Recently hybrid beam system is widely used because it has many structural advantages such as short construction period and low story height etc. Generally steel wide flange beam exposure type and embedded type hybrid beams are constructed. Even though exposure hybrid beam is easily constructed, the fire proofing protection process is necessary because steel wide flange beam cannot resist to fire itself. Story height reduction type hybrid beam, which is introduced hybrid beam in this paper, does not need fire proofing protection process because it is constructed as a fully embedded type hybrid beam. Developed construction process and actual construction cases of story height reduction type hybrid beam were introduced in this study.