• Publications of The Korean Astronomical Society
• /
• v.15 no.spc1
• /
• pp.39-60
• /
• 2000

We will discuss two-dimmensional spectrophotometry including long-slit spectroscopy and narrow-band imaging. The basic principles, applications, and techniques of observations and data reduction of spectroscopy and spectrophotometry for extended objects are described. This discussion will focus on practical long-slit spectroscopy using a Cassegrain spectrograph attached with 2 or 4m class telescopes and on imaging spectrophotometry using narrow-band interference filter sets. We will discuss scientific applications.

• Proceedings of the KSR Conference
• /
• 1998.05a
• /
• pp.588-595
• /
• 1998

The purpose of this study is to perform development of techniques for reduction of ground vibration caused by highspeed railway. At the first year, we have researched for the statically and dynamically characteristics of materials that could reduce the propagated ground vibration. The tire chip and blast furnace slag had been selected as the reduction material. And we have tested these materials by computer analysis.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.656-657
• /
• 2006

One append way of liquid state inhibitor was investigated, which putting V, Cr into W-Co composite solutions in the form of ionization. After spray drying and being calcined, W-Co composite oxides could come into being. Then taking fluidization techniques, well-proportioned W-Co composite powder compounded with inhibitor could be produced in the end.

• Advances in concrete construction
• /
• v.9 no.4
• /
• pp.423-435
• /
• 2020

Open ground story (OGS) reinforced concrete (RC) buildings are vulnerable to the complete collapse or severe damages under seismic actions. This study investigates the effectiveness of four different strengthening techniques representing the local and global modifications to improve the seismic performance of a non-ductile RC OGS frame. Steel caging and concrete jacketing methods of column strengthening are considered as the local modification techniques, whereas steel bracing and RC shear wall systems are selected as the global strengthening techniques in this study. Performance-based plastic design (PBPD) approach relying on energy-balance concept has been adopted to determine the required design force demand on the strengthening elements. Nonlinear static and dynamic analyses are carried out on the numerical models of study frames to assess the effectiveness of selected strengthening techniques in improving the seismic performance of OGS frame.. Strengthening techniques based on steel braces and RC shear wall significantly reduced the peak interstory drift response of the OGS frame. However, the peak floor acceleration of these strengthened frames is amplified by more than 2.5 times as compared to that of unstrengthened frame. Steel caging technique of column strengthening resulted in a reasonable reduction in the peak interstory drift response without substantial amplification in peak floor acceleration of the OSG frame.

• Physical Therapy Korea
• /
• v.4 no.1
• /
• pp.70-77
• /
• 1997

An A-B-A-C single subject research design was used to assess the effectiveness of transcutaneous electrical nerve stimulation(TENS) and inhibitive techniques on spasticity in a 10-year-old girl with cerebral palsy. Stimulation electrodes were placed over the sural nerve of the right leg. The standard method of cutaneous stimulation, TENS with impulse frequency of 100 Hz, was applied. Inhibitive techniques including stretch, antagonist contraction, and weight bearing were used. The tonus of the leg muscle was measured by means of a surface-EMG biofeedback unit. Visual analysis of data indicate that the child showed clinically significant reduction of spasticity in passive ankle movement following 30 minutes of TENS and inhibitive techniques application, respectively. The effect of TENS on spasticity inhibition was similar to that of inhibitive techniques. This result suggests that for this child with cerebral palsy, the application of TENS to the sural nerve may induce short-term post-stimulation inhibitory effects on the spasticity of cerebral palsy. Replication of this study with a more complex single-subject design involving more subjects is recommended to confirm this result.

• Structural Monitoring and Maintenance
• /
• v.5 no.3
• /
• pp.417-428
• /
• 2018

In this paper, various model reduction methods were assessed using a shear frame, plane and space truss structures. Each of the structures is one-dimensional, two-dimensional and three-dimensional, respectively. Three scenarios of poor, better, and the best were considered for each of the structures in which 25%, 40%, and 60% of the total degrees of freedom (DOFs) were measured in each of them, respectively. Natural frequencies of the full and reduced order structures were compared in each of the numerical examples to assess the performance of model reduction methods. Generally, it was found that system equivalent reduction expansion process (SEREP) provides full accuracy in the model reduction in all of the numerical examples and scenarios. Iterated improved reduced system (IIRS) was the second-best, providing acceptable results and lower error in higher modes in comparison to the improved reduced system (IRS) method. Although the Guyan's method has very low levels of accuracy. Structures were classified with the excitation frequency. High-frequency structures compared to low-frequency structures have been poor performance in the model reduction methods (Guyan, IRS, and IIRS).

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• v.4 no.4
• /
• pp.201-208
• /
• 2000

The reduction of NO by hydrocarbons was investigated over Cu/Al$_2$O$_3$catalysts using a stainless steel flow reactor under highly oxidising diesel exhaust conditions(up to 15%). Three different Cu loadings(1,5 and 10wt.%) on an $Al_2$O$_3$support were prepared and characterized using spectroscopic techniques. The catalytic activity tests show that different Cu loadings as well as temperature, oxygen, and hydrocarbon concentration levels significantly influence the NO reduction. Increasing Cu loadings up to 5 and 10wt.% decreases the catalytic activities for NO reduction due to the formation of a bulk crystalline CuO phase, as observed from XRD and SEM images. In particular, the visualization of the copper dispersion on the surface using the SEM-BEI technique provides information on the extent of copper saturation, particle size, and the effects on NO reduction. However, the lower Cu loading(1 wt.%) increases the catalytic activity with a temperature window of 720-810K, thereby favoring the formation of well dispersed isolated Cu species, e.g. Cu(sup)2+ ions, which is related to selective NO reduction. The effects of other reaction parameters, such as oxygen, the hydrocarbon level and type, and byproduct emissions are further discussed.

• The Journal of the Korean dental association
• /
• v.58 no.2
• /
• pp.103-113
• /
• 2020

Background: Reduction malarplasty is one of the most popular facial contouring surgeries in east Asia for making patients' faces smaller. Currently in Korea, reduction malarplasty surgeries are performed mostly at plastic surgery clinics, but few cases are done at oral and maxillofacial surgery clinics. The reason might be because of post-operative complications after reduction malarplasty, such as undercorrection, overcorrection, asymmetry, cheek drooping, malunion, pain and noise. Those complications should be uneasy to be handled by oral and maxillofacial surgeons, however, they can be prevented by knowing the effective and safe reduction malarplasty techniques. Therefore, in this article the author as an oral and maxillofacial surgeon, would like to suggest safe and effective surgical methods for reduction malarplasty customized for Korean patients. Method: L- shape osteotomy of zygomatic body was performed with intraoral approach via vestibular incision, and the zygomatic arch was osteotomized with extraoral approach via sideburn incision. Then zygomatic complex was separated and rotated mesio-superiorly without removal of a bony strip and fixed with miniplates and microplates without making a bony gap. Conclusion: Surgical results were favorable and satisfied by the patients without cheek drooping, malunion, undercorrection and asymmetry.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.9C
• /
• pp.915-921
• /
• 2009

Lenstra-Lenstra-Lovasz (LLL) algorithm, which is one of the lattice reduction (LR) techniques, has been extensively used to obtain better bases of the channel matrix. In this paper, we jointly apply Seysen's lattice reduction Algorithm (SA), instead of LLL, with the conventional linear precoding algorithms. Since SA obtains more orthogonal lattice bases compared to those obtained by LLL, lattice reduction aided (LRA) precoding based on SA algorithm outperforms the LRA precoding with LLL. Simulation results demonstrate that a gain of 0.5dB at target BER of $10^{-5}$ is achieved when SA is used instead of LLL or the LR stage.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.16 no.3
• /
• pp.8-14
• /
• 2007

The geometry in the weight reduction design is very required to be started from the conceptual design with low cost, high performance and quality. In this point, a topological shape fur optimization concerned with conceptual design of structure is important. The method used in this paper combines three optimization techniques, where the shape and physical dimensions of the structure and material distribution are hierachically optimized, with the maximum rigidity of structure and lightweight. As the applications, the technology of weight reduction design is applied on designs of aluminum control arm and inner panel of hood.