• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(5)
• /
• pp.67-70
• /
• 2002

In this paper, we have researched a Automatic Power Factor Correction and THD reduction System for the multiple connection of CFL. Also in this paper, the power factor has been researched for the design of CFL, found the reason why the power factor is low and THD is too high. This paper has designed the PFC System for the multiple connection of CFL, and then we have increased the power factor and reduced the total harmonic distortion, by implementing them.

• Asian Journal of Atmospheric Environment
• /
• 제5권4호
• /
• pp.228-236
• /
• 2011

Since most Green House Gases (GHGs) and air pollutants are generated from the same sources, it will be cost-effective to develop a GHGs reduction plan in combination with simultaneous removal of air pollutants. However, effects on air pollutants reduction according to implementing any GHG abatement plans have been rarely studied. Reflecting simultaneous removal of air pollutants along with the GHGs emission reduction, this study investigated relative cost effectiveness among GHGs reduction action plans in Busan Metropolitan City. We employed the Data Envelopment Analysis (DEA), a methodology that evaluates relative efficiency of decision-making units (DMUs) producing multiple outputs with multiple inputs, for the investigation. Assigning each GHGs reduction action plan to a DMU, implementation cost of each GHGs reduction action plan to an input, and reduction potential of GHGs and air pollutants by each GHGs reduction action plan to an output, we calculated efficiency scores for each GHGs reduction action plan. When the simultaneous removal of air pollutants with the GHGs reduction were considered, green house supply-insulation improvement and intelligent transportation system (ITS) projects had high efficiency scores for cost-positive action plans. For cost-negative action plans, green start network formation and running, and daily car use control program had high efficiency scores. When only the GHGs reduction was considered, project priority orders based on efficiency scores were somewhat different from those when both the removal of air pollutants and GHGs reduction were considered at the same time. The expected action plan priority difference is attributed to great difference of air pollutants reduction potential according to types of energy sources to be reduced.

• Smart Structures and Systems
• /
• 제14권6호
• /
• pp.1005-1030
• /
• 2014

The need for assessing dynamic response of typical industrial piping systems subjected to seismic loading motivated the authors to apply model reduction techniques to experimental dynamic substructuring. Initially, a better insight into the dynamic response of the emulated system was provided by means of the principal component analysis. The clear understanding of reduction basis requirements paved the way for the implementation of a number of model reduction techniques aimed at extending the applicability range of the hybrid testing technique beyond its traditional scope. Therefore, several hybrid simulations were performed on a typical full-scale industrial piping system endowed with a number of critical components, like elbows, Tee joints and bolted flange joints, ranging from operational to collapse limit states. Then, the favourable performance of the L-Stable Real-Time compatible time integrator and an effective delay compensation method were also checked throughout the testing campaign. Finally, several aspects of the piping performance were commented and conclusions drawn.

• Genomics & Informatics
• /
• 제16권4호
• /
• pp.37.1-37.3
• /
• 2018

Gene-gene interaction is a key factor for explaining missing heritability. Many methods have been proposed to identify gene-gene interactions. Multifactor dimensionality reduction (MDR) is a well-known method for the detection of gene-gene interactions by reduction from genotypes of single-nucleotide polymorphism combinations to a binary variable with a value of high risk or low risk. This method has been widely expanded to own a specific objective. Among those expansions, fuzzy-MDR uses the fuzzy set theory for the membership of high risk or low risk and increases the detection rates of gene-gene interactions. Fuzzy-MDR is expanded by a maximum likelihood estimator as a new membership function in empirical fuzzy MDR (EFMDR). However, EFMDR is relatively slow, because it is implemented by R script language. Therefore, in this study, we implemented EFMDR using RCPP ($c^{{+}{+}}$ package) for faster executions. Our implementation for faster EFMDR, called EMMDR-Fast, is about 800 times faster than EFMDR written by R script only.

• Safety and Health at Work
• /
• 제11권4호
• /
• pp.418-424
• /
• 2020

Background: According to the previous studies, the work-related accident rate decreased in Korea after the introduction of occupational health and safety management system (OHSMS), but there were several disasters in Korea such as subway worker's death at Guui station in 2016 and the Taean thermal power plant accident in 2018, which escalated the social demand for safety. In 2018, OHSMS became an international standard, as ISO45001 was announced. Methods: A survey was conducted to research the implementation status of OHSMS and changes in people's perception, and the results were compared with those of a past survey. Results: Enhanced social demand and various stakeholders' (not only buyer) needs, and social responsibility are perceived as the motivation for the introduction of OHSMS rather than legal compliance or customer demand. In the questionnaire about problems with the implementation of OHSMS, the factors with higher response rate in 2018 than 2004 were "excessive cost" and "complicated documentation management." In the questionnaire about how to promote OHSMS in organizations, most people answered "reduction of workers' compensation insurance rate" in 2004, but most people answered "exemption from health and safety supervision" in 2018. Conclusion: For the effective implementation of ISO45001, emphasis is placed on social demand, training to recognize health and safety as a part of management, and the reduction of certification and consulting costs to promote the introduction of OHSMS. Incentives such as insurance premium cuts and exemptions from health and safety supervision are needed.

• 한국산업보건학회지
• /
• 제32권2호
• /
• pp.182-194
• /
• 2022

Objectives: This study evaluates and recommends the priority of policy implementation to improve the fire protection clothing management system used by firefighters and the reduction of cross-contamination from contaminated clothing at the scene of a fire. Methods: It consisted of 7 experts and conducted three interviews and two modified Delphi surveys. Through the results of previous research and interviews with experts, a plan to reduce cross-contamination of fire suits and improve the management system was first derived. An improvement plan was presented in the four areas including resources, management, fire protection related work, and laws and regulations, and the priority of policy implementation was derived by analyzing the importance and practicality of the policy at the same time. Results: As a result of the analysis, the first priority was education on the health effects of pollutants at the disaster scene for firefighters, and the second priority was the addition of SOP for the primary decontamination of on-scene personal protective equipment in preparation for the health effects of the disaster scene, and education for fire suppression and rescue workers. The next step was to improve the management system of personal protective equipment such as fire suits and develop a training course for systematic operation. Conclusions: This findings could be used in the implementation of mid- to long-term firefighting policies for the systematic operation and establishment of a systematic management system for personal protective equipment such as fire protective suits.

• 환경정책연구
• /
• 제14권1호
• /
• pp.33-52
• /
• 2015

본 논문의 목적은 국가 로드맵 상에 제시된 7대 부문(산업, 수송, 건물, 공공, 농림어업, 폐기물, 전환)에 대한 부문별 감축 수단을 대상으로 향후 보다 발전적인 이행전략을 분석하는 것이다. AHP와 ANP 방법론을 활용해 방법론 간 차이점이 나타난 부문과 그렇지 않은 부문을 비교분석하였다. 감축대상인 7대 부문 대부분에서 이행목표로서 비용효율성과 효과성(기술개발, 감축성과)보다는 이행가능성이 상대적으로 중요한 것으로 분석되었다. 평가기준에서는 공공, 전환 부문에서 방법론에 따라 최우선순위가 바뀌었으며, 감축방안에 해당하는 대안의 우선순위 및 기준 관점의 대안 내 우선순위도 방법론에 따른 차이가 나타났다.

• 대한환경공학회지
• /
• 제36권6호
• /
• pp.451-459
• /
• 2014

본 연구에서는 2012년부터 수질오염총량관리 시행계획이 시행중인 진위천 수계의 연차별 지역개발 및 삭감계획을 평가하여 최종년도 할당부하량 및 목표수질을 만족하기 위한 방향성을 제시하고자 하였다. 진위천 수계 8개 자치단체의 시행계획을 분석한 결과, 대부분의 지자체에서 삭감계획보다 개발계획의 연차별 진행률이 빠른 경향을 보였다. 군포시, 용인시, 화성시는 2020년, 평택시는 2018년, 안성시는 2015년, 오산시는 2019년이 되어서야 삭감계획 진행율이 개발계획 진행율 보다 높거나 같아졌다. 주요 삭감방법은 하수처리시설 신증설, 방류수질 개선, 축산폐수 및 고형물의 자원화, 비점저감시설 확충 등 이었으며, 특히 축산산업이 활발한 지역의 특성이 반영되어 총 삭감률 중 가장 높은 비율을 차지하는 삭감방법은 축산폐수 및 고형물의 자원화로 삭감률은 34.1%에 해당되었다. 진위천 수계의 수질오염총량제가 성공적으로 정착하기 위해서는 삭감계획 및 지역개발계획의 체계적인 관리를 포함하여 기초자치단체의 적극적인 의지가 무엇보다 중요할 것으로 판단된다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 제14회 신호처리 합동 학술대회 논문집
• /
• pp.503-506
• /
• 2001

본 논문에서는 마이크 입력레벨 조절기의 구현과 이를 이용한 인식률의 향상을 다룬다. 마이크를 통한 음성 입력이 너무 작거나 너무 크면 인식률에 직접 영향을 미치므로 인식에 적합한 입력레벨로 조절할 필요가 있다. 자동 입력레벨 조절기의 구현을 위해 고려할 사항을 연구했으며, 이를 통해 PC환경의 입력레벨 조절기를 구현했다. 수집된 음성 데이터베이스는 켑스트럼 평균차감법(CMS)을 이용하여 채널왜곡을 보상했으며, 구현된 조절기를 이용하여 실험한 결과, 이용하지 않은 경우에 비해 약 50%의 오인식율을 줄일 수 있었다.

• 품질경영학회지
• /
• 제38권4호
• /
• pp.531-539
• /
• 2010

Mega-Y project is very important for a company to gain a competitive advantage in markets or to achieve drastic change in the internal processes. It stems from the company strategy and annual management goals or key performance measures, and is proceeded by the cross-functional team. This paper presents the success factors and implementation process of the Mega-Y projects. The implementation process is presented in 5 steps, including project selection, cross-functional team building, establishment of the master plan, development and execution of sub-projects, and project completion. A case study on the cost reduction project of aircraft development is presented to help for the practitioners to deploy the implementation process introduced in this paper.