• Journal of the Korean Society for Heat Treatment
• /
• v.9 no.1
• /
• pp.53-61
• /
• 1996

Effects of carbon and Ti on damping capacity are investigated in an Fe-17%Mn alloy. The suppressive force of carbon against ${\gamma}{\rightarrow}{\varepsilon}$ transformation increases linearly with an increase in its content, lowering Ms temperature and volume fraction of ${\varepsilon}$ martensite. Carbon deteriorates damping capacity by reducing the interfacial area of damping sources and mobility of the boundaries contributing to anelastic deformation. The reduction in damping capacity is accelerated when carbon-containing alloy is aged at higher temperatures above room temperature. The effect of Ti on damping capacity is found to be benificial in carbon-containing alloy, which is attributed to the depletion of carbon solute due to the formation of TiC.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.11
• /
• pp.5419-5435
• /
• 2017

The construction of panoramic images on smartphones and low-powered devices is a challenging task. In this paper, we propose a new approach for smoothly stitching images on mobile phones in the presence of moving objects in the scene. Our main contributions include handling moving object problems, reducing processing time, and generating rectangular panoramic images. First, unique and robust feature points are extracted using fast ORB method and a feature matching technique is applied to match the extracted feature points. After obtaining good matched feature points, we employ the non-deterministic RANSAC algorithm to discard wrong matches, and the hommography transformation matrix parameters are estimated with the algorithm. Afterward, we determine precise overlap regions of neighboring images and calculate their absolute differences. Then, thresholding operation and noise removal filtering are applied to create a mask of possible moving object regions. Sequentially, an optimal seam is estimated using dynamic programming algorithm, and a combination of linear blending with the mask information is applied to avoid seam transition and ghosting artifacts. Finally, image-cropping operation is utilized to obtain a rectangular boundary image from the stitched image. Experiments demonstrate that our method is able to produce panoramic images quickly despite the existence of moving objects.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.7A
• /
• pp.1005-1015
• /
• 1999

This paper is concerned with an improvement on IFFT (inverse fast Fourier transform) and FFT based baseband digital implementation algorithm for BPSK (binary phase shift keying)-modulated MC-CDMA (multicarrier-code division multiple access) systems, that is functionally equivalent to the conventional implementation algorithm, while reducing computational complexity and bandwidth requirement. We also derive an equalizer structure for the proposed implementation algorithm. The proposed algorithm is based on a variant of FFT algorithm that utilizes a N/2-point FFT/IFFT for simultaneous transformation and reconstruction of two N/2-point real signals. The computer simulations under additive white Gaussian noise channels and frequency selective fading channels using equal gain combiner and maximal ratio combiner diversities, demonstrate the performance of the proposed algorithm.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.55 no.12
• /
• pp.561-569
• /
• 2006

Because of the trend of deregulation, power industry is going through an unprecedented transformation in North America and Europe, and there are a host of acquisitions and mergers by the private sector to position themselves to take advantage of new business opportunities. Deregulation has accelerated the development of smaller generators and fuel cells will gradually become more attractive to mainstream electricity users as they improve in capability and decrease in cost. Fuel Cell technology is surveyed and the potential of using fuel cell as a distributed generation source is presented. This paper recommends the fuel cell power plants as alternative energy sources for distributed generation in Jeju Island, Korea. This will help in increasing fuel efficiency, at least double the current thermal plants', increasing the reliability of power supply, reducing the dependency on the HVDC link, providing quality power to the growing infrastructure, and maintaining clean air in meeting the free-trade international island.

• Corrosion Science and Technology
• /
• v.6 no.1
• /
• pp.29-32
• /
• 2007

The final goal of this study is to develop the core technologies applicable to the design, operation and maintenance of welds in nuclear structures. This study includes predicting microstructure changes and residual stress for welded parts of nuclear power plant components. Furthermore, researches are performed on evaluating fatigue, corrosion, and hydrogen induced cracking and finally constructs systematically integrated evaluation system for structural integrity of nuclear welded structures. In this study, metallurgical and mechanical approaches have been effectively coordinated considering real welding phenomena in the fields of welds properties such as microstructure, composition and residual stress, and in the fields of damage evaluations such as fatigue, corrosion, fatigue crack propagation, and stress corrosion cracking. Evaluation techniques tried in this study can be much economical and effective in that it uses theoretical/semi-empirical but includes many additional parameters that can be introduced in real phenomena such as phase transformation, strength mismatch and residual stress. It is clear that residual stress makes great contribution to fatigue and stress corrosion cracking. Therefore the mitigation techniques have been approached by reducing the residual stress of selected parts resulting in successful conclusions.

• Journal of Magnetics
• /
• v.14 no.1
• /
• pp.7-10
• /
• 2009

In this work, we studied the effects of Sn addition on the ordering temperature of FePt thin film. The coercivity of FePtSn film was about 1000 Oe greater than the coercivity of FePt film for an annealing temperature of $600^{\circ}C$. Therefore, Sn addition was effective in promoting the $L1_0$ ordering and in reducing the ordering temperature of the FePt film. From our X-ray diffraction results, we found that in the as-deposited film, the addition of Sn induced a lattice expansion in disordered FePt thin films. After the annealing process, the excess Sn diffuses out from the ordered FePt thin film because of the difference in the solid solubility of Sn between the disordered and ordered phases. The existence of precipitates of Sn from the FePt lattice was deduced by Curie temperature measurements of the FePt and FePtSn films. Therefore, the key role played by the addition of Sn to the FePt film can be explained by a reduction in the activation energy for the $L1_0$ order-disorder transformation of FePt which originates from the high internal stress in the disordered phase induced by the supersaturated Sn atoms.

• Korean Journal of Microbiology
• /
• v.27 no.4
• /
• pp.366-372
• /
• 1989

Twenty-one strains were tested for 11$\beta$-hydroxylation of Reichstein's substance S. Four fungi exhibited ability for the reaction, among which Pellicularia fillamentosa showed the highest activity. The 11$\beta$-hydroxylase of this fungus was proved to be induced by the substrate, cycloheximide reducing significantly the activity of the enzyme. Range of optimum pH for the 11$\beta$-hydroxylation was broad and found to be 2.0-8.0. Test of the enzyme activity at different growing stages, from spore to mycelia, showed that the branching stage of hyphae and the mature mycelial stage were the most effective for the Reichstein's substance S transformation. However, 11$\beta$-hydroxylase in the intact spore was turned out to be uninducible with the substrate.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.11a
• /
• pp.781-784
• /
• 2004

Method of Steel plate reinforced by fiber sheet is advantageous in the secure loading facility. For this method are a light weight and a high strength, the thickness of steel can be reduced Effects of composite system are depreciated when the thickness of steel is thin. This is the result of the difference of ductility ratio with steel plate. Steel plate reinforced by fiber sheets confirms the ability of transformation. This is the result of the property of steel materials Steel plate reinforced by fiber sheet didn't display an enough performance when theadhesives are epoxy rosin. This is the result of the slide of the surface of stee1. The adhesive ability is varied by the number and span of anchor bolts. There wasn't happening the separation between steel and epoxy. Thus the method used in combination with anchor and epoxy is best excellent. This is the result of the upward of accumulation effects Shearing force is in proportion to the number of bolts. But the ability of shearing force per one bolt is reducing. Thickness of steel plate reinforced by fiber sheet must be designed so that steel is endure before concrete is wreck.

• Macromolecular Research
• /
• v.16 no.6
• /
• pp.539-543
• /
• 2008

Many natural proteins self-assemble in complex ways, either to fulfill their biological function or introduce particular properties, such as high strength and toughness. We report the morphological transition in water from a spherical to rod-like shape of Bombyx mori silk fibroin by reducing the pH. Transmission electron microscopy, scanning electron microscopy, and dynamic light scattering were used to characterize the dilute solutions of silk fibroin in an aqueous environment, and provide direct visualization of the transformation of spherical micelles at pH 6.8 to nanofibrils at pH 4.8. This change in morphology occurred as a result of the stretching entropy due to the formation of $\beta$-sheets, which was analyzed using circular dichroism spectroscopy. This study demonstrates the self-assembly of silk fibroin as a function of pH.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.6
• /
• pp.188-196
• /
• 2004

The objective of this paper is to propose a new technology of the orthopaedic surgery using the combination of reverse engineering (RE) based on CT data and rapid prototyping (RP). The proposed technology utilizes symmetrical characteristics of the human body and capability of the combination of RE and RP, which rapidly manufactures three-dimensional parts from CT data. The original .stl data of injured extents are generated from the mirror transformation of .stl file fur uninjured extents. The physical shape before injuring is manufactured from RP using the original .stl data. Subsequently, pre-operative planning, such as a selection of proper implants, preforming of the implant, a decision of fixation locations and an insert position for the implant, an estimation of the invasive size, and pre-education of operators are performed using the physical shape. In order to examine the applicability and the efficiency of the proposed surgical technology, various case studies, such as a distal tibia commented fracture, a proximal tibia plateau fracture and an iliac wing fracture of pelvis, are carried out. From the results of case studies, it has been shown that the proposed technology is an effective surgical tool of the orthopaedic surgery reducing the operational time, the operational cost, the radiation exposure of the patient and operators, and morbidity. In addition, the proposed technology could improve the accuracy of operation and the speed of rehabilitation.