• Bulletin of the Korean Chemical Society
• /
• v.21 no.4
• /
• pp.405-411
• /
• 2000

Electrochemical and spectroelectrochemical studies of cobalt-Schiff (Co-SB) base complexes, Co(salen) [N-N'-bis(salicylaldehyde)-ethylenediimino cobalt(II)] and Co(salophen) [N-N'-bis(salicylaldehyde)-1,2-pheny-lenediimino cobalt(II)], have been c arried out to test them as oxygen reduction catalysts. Both compounds were found to form an adduct with oxygen and exhibit catalytic activities for oxygen reduction. Comparison of spec-tra obtained from electrooxidized complexes with those from Co-SB complexes equilibrated with oxygen in-dicates that the latter are consistent with the postulated complex formed with oxygen occupying the coaxial ligand position, namely, Co(III)-SB·O2 - .The catalysis of oxygen reduction is thus achieved by reducing Co(III) in the oxygen-Co-SB adduct, releasing the oxygen reduction product, e.g., O2 - ., from the Co(II)-SB complex.

• KSBB Journal
• /
• v.26 no.3
• /
• pp.206-210
• /
• 2011

The growth effect of Nannochloropsis oculata (N.oculata), unicellular microalgae, by alginate was investigated. Alginate was depolymerized with sulfuric acid ($H_2SO_4$) and heat ($121^{\circ}C$), simultaneously. Addition of 0.75% alginate oligomer depolymerized with 0.2 N $H_2SO_4$ showed the maximum yield and the growth rate of N. oculata. Chlorophyll content and reducing sugar was increased by alginate oligomer in a dose-dependent manner. Alginate oligomer promoted the growth of N. oculata, whereas the original alginate polysaccharides had no significant effect. Laminaria japonica (L. japonica) extract containing high level of alginate was also increased growth rate and chlorophyll content. $CO_2$ supply addition to L. japonica extract showed no change the growth rate, although addition to alginate oligomer showed prominently increased. N. oculata could use more saccharides in presence of $CO_2$ according to reducing sugar determination. From these results, it is useful to establish optimal condition for high cell density cultivation of N. oculata.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.23 no.2
• /
• pp.230-238
• /
• 2015

The main purpose of this paper is to suggest opportunities for reducing $CO_2$ emission in energy conversion of a vehicle, focused on auxiliary energy improvement in the automotive field. As part of worldwide efforts to curb global warming and to protect the domestic industry as trade barriers, many countries have set goals to regulate greenhouse gas emissions. As an example, new $CO_2$ emission regulation in EU was expected to go into effect strictly in 2020. Therefore, global car-makers need to establish strategic responsiveness of the regulations. This paper shows $CO_2$ economic value by using the correct interpretation of the relevant laws and regulations. The $CO_2$ value analyzed using quantitative figures leads to the possibility of auxiliary(accessories, HVAC, electric apparatus etc.) technology for improving fuel economy. As a result, this study generalizes the meaning of electric power saving for each driving mode by auxiliary energy improvement.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.33 no.12
• /
• pp.968-976
• /
• 2009

As the global warming becomes a serious environmental problem, studies of reducing $CO_2$ emission in power generation area are in progress all over the world. One of the carbon capture and storage(CCS) technologies is known as oxy-fuel combustion power generation system. In the oxy-fuel combustion system, the exhaust gas is mainly composed of $CO_2$ and $H_2O$. Thus, high-purity $CO_2$ can be obtained after a proper $H_2O$ removal process. In this paper, an oxy-fuel combustion cycle that recovers the waste heat of a high-temperature fuel cell is analyzed thermodynamically. Variations of characteristics of $CO_2$ and $H_2O$ mixture which is extracted from the condenser and power consumption required to obtain highly-pure $CO_2$ gas were examined according to the variation of the condensing pressure. The influence of the number of compression stages on the power consumption of the $CO_2$ capture process was analyzed, and the overall system performance was also investigated.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.577-580
• /
• 2008

Concrete absorbs $CO_2$ in the air because of carbonation. according to rising concern for lasting earth environment efforts of reducing greenhouse gas, especially co2, are occurred whole industry throughout the world. In this paper selected one building and computed amount of production and absorbtion of co2 during its lifecycle at concrete. In computing amount of absorbtion of co2 considered amount of absorbtion according to the area of concrete changing senarioes of servicelife(40,60,80 years) and deconstruct preiod(60,40,20 years). As a result, size of concrete and maintenance period of disused concrete work increasement of $CO_2$ as main factors. We came to the conclusion that maintenance period is more important than recycle of unused concrete as a method for reducing environmental load in architectural industry.

• Journal of Powder Materials
• /
• v.15 no.2
• /
• pp.107-113
• /
• 2008

Ultrafine TiC-5%Co powders were synthesized by spray drying of aqueous solution of TiO$(OH)_2$ slurry and cobalt nitrate, followed by calcination and carbothermal reaction. The oxide powders with carbon powder was reduced and carburized at $900^{\circ}C{\sim}1250^{\circ}C$ under hydrogen atmosphere. During reduction, CO gas was mainly evolved by reducing reaction of oxides. Ultrafine TiC-5%Co powders were easily formed by carbothermal reaction at $1250^{\circ}C$ due to using ultrafine powders as raw materials. The ultrafine WC-TiC-Co alloy prepared by sintering of mixed powder of ultrafine WC-13%Co powder and ultrafine TiC-5%Co powder has higher sintered density and mechanical properties than WC-TiC-Co alloy prepared by commercial WC, TiC and Co powders.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.11a
• /
• pp.460-463
• /
• 2002

$MoO_3$ thin films were deposited on electrode and heater screen-printed alumina substrates in $O_2$ atmosphere by RF reactive sputtering using Molybdenum metal target. The deposition was performed at $300^{\circ}C$ with 350W of a forward power in an $Ar-O_2$ atmosphere. The working pressure was maintained at $3{\times}10^{-2}mtorr$ and all deposited films were annealed at $500^{\circ}C$ for 5hours. To investigate gas sensing characteristics of the addition doped $MoO_3$ thin film, Co, Ni and Pt were used as adding dopants. The sensing properties were investigated in tenn of gas concentration under exposure of reducing gases such as $H_2$, $NH_3$ and CO at optimum working temperature. Co-doped $MoO_3$ thin film shows the maximum 46.8% of sensitivity in $NH_3$ and Ni-doped $MoO_3$ thin film exhibits 49.7% of sensitivity in $H_2$.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.8
• /
• pp.705-710
• /
• 2003

MoO$_3$thin films were deposited on electrode of alumina substrates in $O_2$atmosphere by RF reactive sputtering using molybdenum metal target. The deposition was performed at 30$0^{\circ}C$ with 350 W of a forward power in an Ar-O$_2$atmosphere. The working pressure was maintained at 3$\times$10$^{-2}$ torr and all deposited films were annealed at 50$0^{\circ}C$ for 5 hours. The surface morphology of films was observed by using a SEM and crystalline phases were analyzed by using a XRD. To investigate gas sensing characteristics of the doped MoO$_3$thin film, Co, Ni and Pt were used as dopants. The sensing properties were investigated in term of gas concentration under exposure of reducing gases such as H$_2$, NH$_3$and CO at optimum working temperature. Co-doped MoO3 thin film shows the maximum 46.8 % of sensitivity in NH$_3$ and Ni-doped MoO$_3$thin film exhibits 49.7 % of sensitivity in H$_2$.

• Korean Journal of Pharmacognosy
• /
• v.29 no.2
• /
• pp.93-103
• /
• 1998

In order to investigate the reducing effect of velvet antler water extract (VAWE) on the toxicity of anti-cancer drug, cis-platin (CDDP) and mitomycin C (MMC), we examined effects of co-administration with VAWE and anti-cancer drugs on their toxicities. We recognized that $LD_{50}$ of CDDP/MMC were increased by co-administration with VAWE and them in mice. It was found that co-administration of VAWE and MMC increased the survival rate in mice treated by lethal dose of MMC. Also, co-administration of VAWE and CDDP/MMC inhibited decrease of the body weight and organ weight in mice intoxificated by CDDP/MMC. The increase of serum blood urea and serum creatinine levels in rats intoxicated by CDDP were significantly inhibited by the co-administrationin with VAWE and CDDP. The decrease of RBC and WBC in rats intoxificated by MMC were significantly inhibited by the co-administration with VAWE and MMC. These results suggest that the combined usage of VAWE and CDDP/MMC drugs may be a new method for prevented or minimized the toxicity of them.

• Journal of the Korean institute of surface engineering
• /
• v.52 no.1
• /
• pp.43-51
• /
• 2019

The environmental pollution which is global warming and abnormal climate is caused by increasing population and activated economics. To reduce environmental pollution, we have being efforts into reducing $CO_2$ emission and use of energy, resources. Especially, for the sake of light weight and fuel efficiency of automotive industry, many countries have defined the restrict environmental regulation which stipulate high magnitude of reducing $CO_2$ emission. In this study, we have predicted the problem of Mu-cell injection molding through the finite element analysis as a function of temperature controlled by Joule heating or in terms of mold temperature. From the result of finite element analysis, we have determined the optimized process and made the injection mold included electric current heating system with Mu-cell manufacturing. Lastly, we analyzed the surface characteristics of the injection products with mold temperature.