• Journal of Biosystems Engineering
• /
• v.41 no.4
• /
• pp.294-303
• /
• 2016

Purpose: This study aimed to evaluate the profitability of four selective mechanization systems in rice cultivation. Methods: Field experiments were conducted in the farmers' field during the wet season (June to November) of 2015 in Bangladesh. Mechanization systems were applied to evaluate four different selective levels (treatment) in eleven consequent operations. Seedlings were raised in a traditional seedbed and trays for manual and mechanical transplanting, respectively. Land preparation, irrigation, fertilizer, pesticide, carrying, and threshing and cleaning operations were performed using the same method in all the experimental plots. The mechanical options in the transplanting, weeding, and harvesting operations were changed. The mechanization systems were $S_1$ = hand transplanting + hand weeding + harvesting by sickle, $S_2$ = mechanical transplanting + Bangladesh Rice Research Institute (BRRI) weeder + reaper, $S_3$ = mechanical transplanting + BRRI power weeder + reaper, and $S_4$ = mechanical transplanting + herbicide + reaper. This experiment was performed in a randomized complete block design with four replications. Power tiller, rice transplanter, BRRI weeder, BRRI power weeder, self-propelled reaper, BRRI open drum thresher, and BRRI winnower were used in the respective operations. Accordingly, the techno-economic performances of the different technologies were calculated and compared with those of the traditional system. Results: The mechanically transplanted plot produced 6-10% more yield than the hand transplanted plot because of the use of tender-aged seedlings. Mechanical transplanting reduced 61% labor and 18% cost compared to manual transplanting. The BRRI weeder, BRRI power weeder, and herbicide application reduced 74, 91, and 98% labor, respectively. The latter also saved 72, 63, and 82% cost, respectively, compared to hand weeding. Herbicide application reduced the substantial amount of labor and cost in the weeding operation. Mechanical harvesting also saved 96% labor and 72% cost compared to the traditional method of harvesting using sickle. Selective mechanization saved 15-17% input cost compared to the traditional method of rice cultivation. Conclusions: Mechanical transplanting with the safe use of herbicide and harvesting by reaper is the most cost- and labor-saving operation. The method might be the recommended set of selective mechanization for enhancing productivity.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.33 no.3
• /
• pp.48-54
• /
• 2010

S plastic injection molding factory located at Namdong Industrial Complex in Incheon produces plastic parts for semiconductor, vacuum cleaners, office furniture, etc. It produces the parts to customers' order and delivers them directly to customers at due dates using the trucks of freight company. In recent years, it has been suffered from the excessive production cost, high lost sales rate, rigid response to customers' order, and high delivery cost, which affect negatively on its profit. This paper introduces a case study on the profit increase through a newly proposed production and distribution method which applies a make-to-stock and multi-visit delivery strategy at S plastic injection molding factory. The proposed method is evaluated by comparing with the current method with respect to sales profit using the historical data of customer demand. It is confirmed through the computational experiments that the proposed production and distribution method yields almost double increase in profit resulted from the increased production, reduced lost sales, reduced production cost, and reduced delivery cost.

• New & Renewable Energy
• /
• v.4 no.2
• /
• pp.52-60
• /
• 2008

More people have become interested in hybrid vehicles - which have been heralded as environmentally friendly automobiles - recently as the opening of domestic hybrid vehicle market draws near. Since gasoline, diesel and LPG hybrid vehicles will be produced, a need exists to conduct economic feasibility study of each vehicle type. This research analyzed projected benefits of these hybrid vehicles based on the 1600cc model. There are two categories of benefits: 1) reduced fuel costs for the owners of the vehicles; and 2) reduced environmental pollution cost. We conducted a sensitivity analysis and estimated the domestic consumer fuel costs based on the international oil prices of 100USD, 150USD, and 200USD per barrel. The analysis showed savings of 2 to 4 million Won in fuel cost and 1 to 2 million Won in environmental pollution cost; therefore, the hybrid vehicles are not economically feasible if they are between 3 to 5 million Won more expensive than the conventional internal combustion engine vehicles.

• Journal of the Korean Dietetic Association
• /
• v.6 no.1
• /
• pp.33-43
• /
• 2000

Environmental pressures from such sources an economic condition, the government and inter-institutional competition create managerial challenges. Economic pressures may be forcing dietetic dept, in hospital to utilize cost∙benefit analysis to assist them in their problem solving. Cost∙benefit analysis have been widely used in business, industry and many other fields with only limited application to foodservice. Due to the lack or this information the purposes of this study were to identify use of cost∙benefit analysis in hospital foodservice system to evaluate the economic efficiency of alternatives, and to make recommendation for operation system change. Using the cost∙benefit method, cash flows are separated into cost and benefits. For an alternative to be selected, indicators, such as NPV, benefit-cost ratio (B/C ratio) with 5% discount rate per annum. The sensitivity analysis was also conducted with difference rate 3%, 7% respectively and reduced employee payroll change. The result of this study can be summarized as follows : 1. The total cost of investment for operation system change was 390,570 thousand won and the total benefit through operation system change was 865,808 thousand won. 2. Net present value(NPV) for 5 years was 475,239 thousand won and benefit-cost ratio was 2.22. 3. In sensitivity analysis with different discount rate 3%, 7%, benefit-cost ratio was 2.25, 2.18 respectively, with total reduced employee payroll change, benefit-cost ratio was 2.86. In conclusion, total benefits were exceeded total costs. Therefore, the project of operation system change in hospital foodservice was found to be economically efficient.

• Proceedings of the KIPE Conference
• /
• 2000.07a
• /
• pp.709-712
• /
• 2000

In general three position sensors are needed to drive three phases SRM. Single position sensor driving method for three phases Switched Reluctance Motor(SRM) is proposed in this paper. By using single position sensor the cost of SRM is reduced. But position sensor the cost of SRM is reduced. But position detection at the staring is needed for single position sensor driving method. In this paper we propose the active align method to detect the relative position of rotor to three phases and align to the nearest phase. We proved the validity of the method by experiment and compare with other method.

• Korean Journal of Biological Psychiatry
• /
• v.7 no.2
• /
• pp.198-205
• /
• 2000

Objectives : Risperidone and clozapine belong to a new generation of antipsychotics that are reportedly more effective and better tolerated than conventional neuroleptics. However, each of these agents costs far more per unit than conventional neuroleptics. The purpose of our retrospective study was to ascertain the total cost and effectiveness of treatment before and after administration of risperidone and clozapine in "revolving door" schizophrenia patients. Method : Data collected on revolving door schizophrenics for 2 years before clozapine and risperidone treatment and for at least 2 years after clozapine and risperidone treatment. Direct cost of inpatient and outpatient treatment was measured. Effectiveness was scaled as "years of mild disability gained". Result : Both risperidone and cloazpine result in higher costs and additional benefits to patients, for example, increased mild disability, reduced number of relapse, and reduced hospital length-of-stay. An ICER of risperidone was less than Rc and ICER of clozapine was greater than Rc. According to decision-analytic this model, risperidone had favorable cost-effectiveness ratios relative to clozapine. Conclusion : We have assumed that risperidone is more cost-effective than clozapine.

• Proceedings of the Korea Society of Poultry Science Conference
• /
• 2001.11a
• /
• pp.58-60
• /
• 2001

Two experiments were conducted to study the effects of nutrient level and feeding method of split diets for a.m. and p.m. on laying hen performance. In both studies, ISA Brown layers were kept in laying hen cages and treatments were represented by three or four replicates each containing 25 or 34 birds. In Experiment 1, the control group(C) was fed a conventional single diet throughout the day and split diet groups(T1, T2 and T3) were offered high energy/protein - low Ca diet and low energy/protein - high Ca diets in a.m. and p.m., respectively. In split diet groups, ME and CP consumption, and feed cost required per day and per kg egg mass were significantly reduced(P＜0.05) compared to C group, while the hen-day egg production, average egg weight and daily feed intake were not different among treatments. In the second study, C and T1 groups were fed the diets same to the C and T2 groups in Experiment 1, respectively. And T2 group was fed the diet mixed with the split diets for a.m. in mash and p.m. in pellet used in T1 group. In T1 and T2 groups, daily feed intake and average egg weight were significantly reduced(P＜0.05), while the hen-day egg production was not influenced by the feeding system. Daily ME and CP consumption, and feed cost were reduced(P＜0.05) in T1 and T2, while the ME, CP and feed cost required per kg egg mass were not different to the C group. In both study, eggshell qualities were improved(P＜0.05) by split diet feeding. It was concluded the feed and nutrients consumption, feed cost per day or per kg egg mass could be spared by introducing split diets for a.m. and p.m., and the feeding method of mixed diet of split diets was also convenient and effective for sparing feed cost and improvement of eggshell quality.

• Korean Journal of Construction Engineering and Management
• /
• v.17 no.5
• /
• pp.54-61
• /
• 2016

The initial planned annual cost is frequently adjusted under the construction process in construction projects. If the annual cost is reduced than the initial planned cost, the number of possible activities is also reduced from initial planned progress schedule. In such cases, project manager need to replan the progress schedule with possible activities within changed annual cost. However, most project manager will proceed as planned schedule without any change. After the project cost has been exhausted, there are many cases to stop the operation of the construction site. This study developed active 5D CAD system that can replan the progress schedule within changed annual cost and simulate the cost status according to the changed schedule for cost visualization. This system can be used as a decision-making tool in the replaning progress schedule and will be able to increase the practical usability of 5D CAD system.

• Pediatric Infection and Vaccine
• /
• v.15 no.1
• /
• pp.20-29
• /
• 2008

The basis of the economic evaluation of vaccination is the balance between the use of the resources (input) and the improvements that result from the vaccination (output). Techniques used for economic evaluation of vaccination are cost analysis, cost-minimization analysis, cost-effectiveness analysis, cost-utility analysis and cost-benefit analysis. Cost analysis seeks to characterize the costs of a given vaccination program. Cost-effective analysis is to helps policy-makers decide on the best use of allocated resources, whether cost-benefit analysis is to helps policy-makers decide on the overall allocation of resources. Cost-utility analysis is a specific form of cost-effective analysis in which outcomes are reduced to a common denominator such as the quality-adjusted life year (QALY) or disability-adjusted life year (DALY). Many economic analyses have been conducted on vaccines in the world, but there have been a little studies on economic evaluation on vaccines in Korea. This paper reviewed the methodology used to economic evaluation on vaccines and immunizations and addressed some examples of the methods.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.921-926
• /
• 2007

A dynamic system under random disturbance is considered in the study. In order to control the system efficiently, proper reduction of system dimension is indispensible in design stage. The reduction method using component cost analysis in conjunction with stochastic analysis is proposed for the control of a system. System response is obtained in terms of dynamic moment equation via Fokker-Plank-Kolmogorov(F-P-K) equation. The dynamic moment response of the system under random disturbance are reduced by using of deterministic version of component cost analysis. The reduced system via proposed "stochastic component cost analysis" is successfully implemented for dynamic response and shows remarkable control performance effectively utilizing "stochastic controller" in physical time domain.