• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.10
• /
• pp.33-37
• /
• 2007

This paper presents the implementation technique to reduce circuit area occupation in designing Low Noise Amplifier (LNA) using vertical shunt symmetric inductor. We applied a vertical shunt symmetric inductor to match the input and output in 3 GHz CMOS LNA to reduce the circuit area. This size efficient amplifier has been designed in a $0.18\;{\mu}m$ digital logic CMOS process. In this paper, the case of conventional asymmetric inductor, and vertical shunt symmetrical inductor with a relatively higher number of turns have been compared in order to efficient a size efficient CMOS LNA design method while still retaining the circuit operation characteristics.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.13 no.1
• /
• pp.321-339
• /
• 2021

Response Surface Method (RSM) has been widely used for flammable cloud size prediction as it can reduce computational intensity for further Explosion Risk Analysis (ERA) especially during the early design phase of offshore platforms. However, RSM encounters the overfitting problem under very limited simulations. In order to overcome the disadvantage of RSM, Bayesian Regularization Artificial Neural (BRANN)-based model has been recently developed and its robustness and efficiency have been widely verified. However, for ERA during the early design phase, there seems to be room to further reduce the computational intensity while ensuring the model's acceptable accuracy. This study aims to develop an integrated method, namely the combination of Center Composite Design (CCD) method with Bayesian Regularization Artificial Neural Network (BRANN), for flammable cloud size prediction. A case study with constant and transient leakages is conducted to illustrate the feasibility and advantage of this hybrid method. Additionally, the performance of CCD-BRANN is compared with that of RSM. It is concluded that the newly developed hybrid method is more robust and computational efficient for ERAs during early design phase.

• The Journal of the Korea Contents Association
• /
• v.10 no.10
• /
• pp.78-85
• /
• 2010

Map/Reduce is the programing model which can implement the Cloud Computing recently has been noticed. The model operates an application program processing amount of data using a lot of computers. It is important to plan the mechanism of separating the data in proper size and distributing that to a cluster consisted of computing node in efficient for using the computing nodes very well. Besides that, planning a process of Map phases and Reduce phases also influences the performance of Map/Reduce. This paper suggests the effectively distributing scheme that separates a huge data and operates Map task in the considering the performance of computing node and network status. And we make the Reduce task can be processed quickly through the tuning the mechanism of Map and Reduce task operation. Using the two Map/Reduce sample application, we experimented the suggestion and we evaluate suggestion considered it in how impact the Map/Reduce performance.

• International Journal of Highway Engineering
• /
• v.8 no.1 s.27
• /
• pp.107-117
• /
• 2006

Recently, there has been a remarkable trend of using aggregates at sizes smaller than 13 mm for drainage asphalt pavement (DAP) in order to reduce the noise generated between vehicle tires and road surface. These DAPs have their performance and durability seriously worsen after several years in-service due to the clogging of void space and the abrasion. This paper proposes the use of large size aggregates in porous asphalt mixtures to overcome these defects. Results of laboratory and field experiments on asphalt mixtures with several aggregate gradations are investigated and compared. The study focuses on advantages of DAP using large size aggregate and on particle size combinations containing no fine aggregates of size 2.36 mm or less, which have not been considered in current engineering practice.

• Korea-Australia Rheology Journal
• /
• v.16 no.3
• /
• pp.153-160
• /
• 2004

Open microcellular foams having small-sized cell and good mechanical properties are desirable for many practical applications. As an effort to reduce the cell size, the microcellular foams combining viscosity improvers into the conventional formulation of styrene and water system were prepared via high internal phase emulsion polymerization. Since the material properties of foam are closely related to the solution properties of emulsion state before polymerization, the flow behavior of emulsions was investigated using a controlled stress rheometer. The yield stress and the storage modulus increased as viscosity improver concentration and agitation speed increased, due to the reduced cell size reflecting both a competition between the continuous phase viscosity and the viscosity ratio and an increase of shear force. Appreciable tendency was found between the rheological data of emulsions and the cell sizes of polymerized foams. Cell size reduction with the concentration of viscosity improver could be explained by the relation between capillary number and viscosity ratio. A correlative study for the cell size reduction with agitation speed was also attempted and the result was in a good accordance with the hydrodynamic theory.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.7 s.238
• /
• pp.1022-1027
• /
• 2005

In this study, ball milling process was applied to reduce the particle size of bio-material down to submicron size. The material used was Ibuprofen. The ball milling was performed at low temperature of about $-180^{\circ}C$. The effect of processing conditions (milling time, milling speed) on the particle size was determined. The results showed that the degree of crystallite of Ibuprofen was slightly reduced by the ball milling process. The results also showed that the size of Ibuprofen was significantly reduced by the ball milling process. The effect of milling time was significant within the milling time of six hours while it was small thereafter.

• Journal of the Korean Society of Visualization
• /
• v.17 no.3
• /
• pp.19-23
• /
• 2019

The purpose of this research is to develop a facile measurement system for colorimetric analysis for zinc powder and size analyzer for zeolite particles in order to reduce the process time for their characteristic analysis. We present facile smartphone-based analysis methods to measure and estimate the size of zinc power by using colorimeteric method and the size of zeolite particles by using ImageJ program which is an open-source program. The results show a possibility of our methods to replace the previous professional analysis processes with them.

• Journal of the Korean institute of surface engineering
• /
• v.37 no.4
• /
• pp.196-199
• /
• 2004

Seedlayers with low surface energy which increases the density of nucleation sites in the initial growth region of the recording layer deposited on them was studied to reduce grain size in recording layer. The seedlayer with low surface energy was so effective to attain finer grain in magnetic upper-layers. The Ni-Fe-O intermediate layer with low surface energy was found to be effective in reduction of grain size as well as magnetic cluster size of Co-Cr-Ta-Pt recording layer. Furthermore, the reduction of grain size in Co-Cr-Ta-Pt recording layer on Ni-Fe-O intermediate layer with low surface energy led to decrease the noise level in the high recording density region.

• Journal of the Korea Safety Management & Science
• /
• v.9 no.2
• /
• pp.123-134
• /
• 2007

This paper focuses on the in-house reliability assurance plan for the bulk materials of each company. The reliability assurance needs in essence a long time and high cost for testing the materials. In order to reduce the time and cost, accelerated life test is adopted. The bulk sampling technique was used for acceptance. Design parameters might be total sample size(segments and increments}, stress level and so on. We focus on deciding the sample size by minimizing the asymptotic variance of test statistics as well as satisfying the consumer's risk. In bulk sampling, we also induce the sample size by adapting the normal life time distribution model when the variable of the lognormal life time distribution is transformed and adapted to the model. In addition, the sample size for both the segments and increments can be induced by minimizing the asymptotic variance of test statistics of the segments and increments with consumer's risk met. We can assure the reliability of the mean life and B100p life time of the bulk materials by using the calculated minimum sample size.

• International Journal of Advanced Culture Technology
• /
• v.9 no.2
• /
• pp.91-99
• /
• 2021

In Korea, some pharmaceutical companies and agricultural machine manufacturers associate the length of the credit period with the retailer's order size. This kind of commercial practice is based on the principle of economy of scale from the supplier's point of view and tends to make retailer's order size large enough to qualify a certain credit period break. Also, the credit period allowed by the supplier makes it possible to reduce the retail price expecting that the retailer can earn more profits by the stimulating the customer's demand. Since the retailer's order size is affected by the end customer's demand, it is reasonable to determine the retail price and the order size simultaneously. In this regard, this paper analyzes the retailer's problem who has to decide his sales price and order quantity from a supplier who offers different credit periods depending on his order size. And we show that the retailer's order size large enough to qualify a certain credit period break. Also, it is assumed that the end customer's demand rate is represented by a linear decreasing function of the retail price.