• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2012년도 제38회 춘계학술대회논문집
• /
• pp.31-34
• /
• 2012

케로신을 연료로 하는 동축 스월 분사기에 대해 정상 상태 및 비정상 상태의 연소 해석을 수행하였다. 난류연소 모델로 화학평형 상태로 가정하는 Non-premixed equilibrium 모델을 이용하였고, 고압의 조건에서 실제유체의 거동을 다룰 수 있도록 상태방정식으로 SRK(Soave-Redlich-Kwong) 상태방정식을 적용하였다. 해석을 통해 온도분포, OH 질량분율 등 정상 상태의 계산 결과와 시간 평균된 비정상 상태의 계산 결과를 비교하였고, 이들 간의 화염 구조가 서로 상이함을 확인할 수 있었다.

• 한국염색가공학회지
• /
• 제33권3호
• /
• pp.141-146
• /
• 2021

Supercritical fluid has excellent dissolving power for various materials based on low viscosity and high diffusion coefficient and is used as solvents in various chemical processes. However, its industrial application can be very tricky because the design, especially the size of the supercritical apparatus, should be carefully chosen to optimize the cost and the production of supercritical fluidic state. And the first step of the supercritical fluid apparatus design is to choose the appropriate size of the reactor vessel to produce supercritical fluid above its critical pressure and temperature. Therefore, this study aims to analyze thermodynamic behaviors of dichloromethane based on ideal gas, van der Waals, Redlich-Kwong, Soave-Redlich-Kwong, and Peng-Robinson equations of state. The correlation between the volume and pressure of dichloromethane at 200℃ was revealed and it can be used to design the optimized size of the supercritical apparatus for industrial production.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 춘계학술대회 초록집
• /
• pp.74.2-74.2
• /
• 2011

A simulation study on synthesis gas process in GTL process was carried out in order to find optimum operation conditions for GTL (gas-to-liquid) pilot plant design. Optimum operating conditions for synthesis gas process were determined by changing reaction variables such as feed temperature and pressure. During the simulation, overall synthesis process was assumed to proceed under steady-state conditions. It was also assumed that physical properties of reaction medium were governed by RKS (Redlich-Kwong-Soave) equation. The effect of temperature and pressure on synthesis gas process $H_2$/CO ratio were mainly examined. Simulation results were also compared to experimental results to confirm the reliability of simulation model. Simulation results were reasonably well matched with experimental results.

• 한국추진공학회지
• /
• 제17권6호
• /
• pp.48-58
• /
• 2013

4개 화학종의 케로신 대체 모델과 다양한 상태 방정식을 이용하여 초임계 압력 조건의 스월 인젝터에서의 열역학 상태량 및 유동 특성을 연구하였다. 상태방정식에 따른 열역학 물성치의 정량적인 비교와 함께 large eddy simulation 및 예조건화 기법을 적용하여 스월 인젝터에서의 유동 특성 해석이 수행되었다. 초임계 스월 인젝터 내에서 열역학 물성치를 비교 조사하였고 상태량 예측 정확도가 인젝터에서의 유동 특성에 상당한 영향을 미치는 것이 관찰되었다. Redlich-Kwong-Peng-Robinson 상태 방정식이 넒은 온도 영역에서 가장 적절한 결과를 제시하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 추계학술대회 초록집
• /
• pp.136.2-136.2
• /
• 2011

A dynamic simulation study on SCR process in GTL process was carried out in order to find optimum operation conditions for pilot plant operation. Optimum operating conditions for SCR synthesis gas process were determined by changing operation variables such as feed temperature and pressure. It was also assumed that physical properties of reaction medium were governed by RKS (Redlich-Kwong-Soave) equation. The effect of temperature and pressure on synthesis gas process $H_2$/CO ratio were mainly examined. Dynamic simulation results were fed back to feed operation condition for optimizing productivity, especially for appropriate condition to FT (Fischer-Tropsch) synthesis unit.

• 한국수소및신에너지학회논문집
• /
• 제30권5호
• /
• pp.395-400
• /
• 2019

Comparative studies between single- and two-stage refrigeration cycle using propane as a refrigerant have been performed for a vapor recompression refrigeration cycle. PRO/II with PROVISION release 10.2 from AVEVA company was used, and the Soave-Redlich-Kwong equation of state model with Twu's alpha function was selected for the modeling and optimization of the refrigeration cycle for the reliquefaction of BOG coming out from the LPG storage tank. In two-stage refrigeraton cycle, 24.8% of compressor power was reduced compared to that of single-stage refrigeration cycle through the optimization works.

• Korean Chemical Engineering Research
• /
• 제54권3호
• /
• pp.350-359
• /
• 2016

본 연구는 vessel blowdown 시 발생하는 온도와 압력 변화를 보다 정확히 예측하기 위하여 기존에 개발된 dynamic model을 기반으로 새로운 모델을 개발하고, 개발한 모델의 정확도를 높이기 위하여 vessel 내부의 흐름이 층류일 때와 난류일 때를 모두 고려하여 vessel 벽면으로부터 기체로의 열 전달량을 계산하였다. 효율적인 열역학 계산을 위해 일체의 계산식은 압력이 감소하는 단계 별로 나누어 진행하였으며 계산의 부담을 덜어주면서 계산의 정확도를 유지하기 위한 압력변화 size를 결정하였다. 개발한 모델에 Peng-Robinson equation과 Soave-Redlich-Kwong equation을 적용하여 각각의 경우에 따른 결과의 차이를 비교하였다. 마지막으로 모델의 검증을 위해 Haque et al.의 실험조건을 동일하게 적용하여 실험 결과와 시뮬레이션 결과를 비교 하였으며, 이를 통해 모델의 정확도를 입증하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.3003-3008
• /
• 2007

Critical nozzle has been frequently employed to measure the flow rate of various gases, but hydrogen gas, especially being at high-pressure condition, was not nearly dealt with the critical nozzle due to treatment danger. According to a few experimental data obtained recently, it was reported that the discharge coefficient of hydrogen gas through the critical nozzle exceeds unity in a specific range of Reynolds number. No detailed explanation on such an unreasonable value was made, but it was vaguely inferred as real gas effects. For the purpose of practical use of high-pressure hydrogen gas, systematic research is required to clarify the critical nozzle flow of high-pressure hydrogen gas. In the present study, a computational fluid dynamics(CFD) method has been applied to predict the critical nozzle flow of high-pressure hydrogen gas. Redlich-Kwong equation of state that take account for the forces and volume of molecules of hydrogen gas were incorporated into the axisymmetric, compressible Navier-Stokes equations. A fully implicit finite volume scheme was used to numerically solve the governing equations. The computational results were validated with some experimental data available. The results show that the coefficient of discharge coefficient is mainly influenced by the compressibility factor and the specific heat ratio, which appear more remarkable as the inlet total pressure of hydrogen gas increases.

• 대한기계학회논문집B
• /
• 제28권10호
• /
• pp.1279-1287
• /
• 2004

The vaporization characteristics of a liquid heptane droplet in a supercritical nitrogen flow are numerically studied. The transient conservation equations of mass, momentum, energy, and species are expressed in an axisymmetric coordinate system. The governing equations are solved time marching method with preconditioning scheme. The modified Soave-Redlich-Kwong equation of state is employed for taking account of real gas effects such as thermodynamic non-ideality and transport anomaly. Changing the convective velocity and ambient pressure, several parametric studies are conducted. The numerical results show that the two parameters, Reynolds number and dimensionless combined parameter(${\mu}$s/${\mu}$d)(equation omitted), have influence on supercritical droplet vaporization.

• 대한기계학회논문집B
• /
• 제27권11호
• /
• pp.1595-1603
• /
• 2003

Droplet combustion at high ambient pressures is studied numerically by formulating one dimensional combustion model in the mixture of n-heptane fuel and air. The ambient pressure is supercritical conditions. The modified Soave-Redlich-Kwong state equation is used in the evaluation of thermophysical properties to account for the real gas effect on fluid p-v-T properties in high pressure conditions. Non-ideal thermodynamic and transport property at near critical and supercritical conditions are also considered. Several parametric studies are performed by changing ambient pressure and initial droplet diameter. Droplet lifetime decreased with increasing pressure. Surface temperature increased with increasing pressure. Ignition time increased with increasing initial droplet diameter. Temporal or spatial distribution of mass fraction, mass diffusivity, Lewis number, thermal conductivity, and specific heat were presented.