• Journal of Digital Convergence
• /
• v.12 no.9
• /
• pp.291-296
• /
• 2014

Most notices on local tax are perceived to be confusing, often leading to a negative feeling towards user due to the complex content and excessive information included in the tax forms. Several local governments have redesigned their notice forms in order to resolve these issues. Therefore I conducted an in-depth analysis of user experiences in regards to the issues posed by the design of the tax notice form so as to offer a basic set of data that can be used to improve the user experience and increase their understanding of the tax form.

• Journal of Mechanical Science and Technology
• /
• v.20 no.9
• /
• pp.1361-1370
• /
• 2006

An electronic beam mis-landing phenomenon on the RGB (red/green/blue) -fluorescent surface has been considered as one of serious problems to be solved in cathode-ray tube (CRT), which is generally caused by mechanical shock and vibration. In this work, structural design concepts on the major parts of the CRT, such as a frame, a shadow mask, and a spring, are studied to improve the mechanical shockproof character of a CRT by FEM-analyses and experimental approaches ; a frame is newly designed to have strength employing the double-corner-beads which reduces considerably the distortion of the frame and the shadow mask : the edge-bead of a shadow-mask is redesigned to maintain the wide curved surface of a shadow-mask after mechanical shock : finally, a spring supporting the frame and the shadow-mask is designed to have enough flexibility along drop-direction. As an example, a conventional type of a 15inch CRT was utilized to demonstrate the feasibility and usefulness of this work. Overall, some favorable information on the structural design of the CRT is achieved, and the mechanical shockproof character of a 15-inch CRT is improved in the degree of 3G $(1G=9.81m/s^2)$ as an average-value.

• Journal of Arbitration Studies
• /
• v.20 no.1
• /
• pp.87-107
• /
• 2010

This paper reviews the distinctive characteristics between e-Trade and e-Commerce in view of commercial arbitration in Korea and explores several improvements for the role of commercial arbitration. As the volume of e-Trade and e-Commerce has expanded day by day, there will be more disputes between traders no matter where the commerce may occur. But despite increasing of the disputes relating to e-Commerce transaction, it seems that the role of commercial arbitration has been shrunk instead. Korea needs to improve the role of commercial arbitration in order to meet and lead the age of u-Trade Hub(u-TH) service and to adopt an offensive or active attitude when arbitration used. Moreover, it is suggested that the competence of arbitration should not only be intensified more precisely but also be redesigned more systematically. Korea should take advantage of arbitration resources actively such as arbitrators as human resource and experiences as knowledge assets and also prepare the policy for sharing those arbitration resources between arbitrators more effectively.

• Journal of the Korean housing association
• /
• v.20 no.1
• /
• pp.27-35
• /
• 2009

This survey is to find out children' needs of D children's park to remodel into a new one and their common opinions about the child playground, and to contribute these results to drive alternative plans. This park is very old and located in detached residential area, Wooa-dong, Deokjin-gu, Jeon-city. The survey was performed by a questionnaire, and the questionnaire was based on the relative literature reviews and was redesigned by researchers. Data were collected from 198 children, who had attended elementary school in Wooa-dong. By analyzing those data, findings were as follows: 1) Play experiences of D children's park were very important for children, so they remembered it. Above all, they remembered the perceptions of D children's park through playing on the playground facilities and the communication with their friends at that time. 2) Children would like to play creatively with facilities, but they need the traditional play facilities like a slide and a swing. So, it would be important for D children's park to plan well with the good facilities, and even it was mentioned in the literature reviews. The planning of park should be checked as an adventure playground, which can allow children to play creatively and with variety, however it should be still considered with some traditional playground facilities.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.531-536
• /
• 2003

In this paper, a redesigned guidance and control system for a lunar lander is presented. In past studies, the authors developed a trajectory and attitude control system which achieves the vertical soft landing on the lunar surface. It is confirmed that the system has a good tracking ability to a predefined profile and good robustness against a thruster failure mode where a partial failure of clustered engines was assumed. However, under the previous control laws, the landing point tends to be shifted, in response to the system parameter values, from a target point. Also, an unbalanced moment due to a thruster failure mode was not considered in the simulation. Therefore, in this study, the downrange control is added to the system to enable the vehicle to land at a pre-assigned target point accurately. Furthermore, inhibiting the effect of the unbalanced moment is attempted thorough redesigning the attitude control system. A numerical simulation was performed to confirm the ability of the proposed system with regard to the above problems. Moreover, in the past simulations, a low initial altitude was assumed as an initial condition: in this study, however, the performance of the proposed system is examined over the whole trajectory from an initial altitude of 10 [km] to the lunar surface.

• Proceedings of the KSME Conference
• /
• 2001.06d
• /
• pp.840-845
• /
• 2001

Development of a small gas-turbine combustor for 100kW class APU(Auxiliary Power Unit) has been performed. This combustor is a reverse-annular type and has a tangential swirler in the liner head to improve the fuel/air mixing and flame stability. Three main and three pilot fuel injectors of the simplex pressure-swirl type are used. The performance target at the design condition includes a turbine inlet temperature of 1170K, a combustion efficiency of 99%, a pattern factor of 30%, and an engine durability of 3000 hours. Under developing the combustor, we conducted performance test of our first prototype(TS1) with some variants. As a result of the test, the performance targets of the combustor are satisfied except that the pattern factor is about 4% higher than target value. So, we redesigned the second prototype(TS2) and conduct performance test with the critical focus on pattern factor and exit mean temperature. We adopted TS2 four variant to check the improvement of pattern factor. As the result, the pattern factors of several variants were satisfied with the performance target. Finally, We chose the TS2A variant as a final combustor for our APU model.

• Proceedings of the KSME Conference
• /
• 2001.06e
• /
• pp.655-660
• /
• 2001

The performance test of a centrifugal compressor for APU(Auxiliary Power Unit) which is developed by the collaborative research of KARI and Samsung TechWin has been conducted. The investigated compressor consists of a curved inlet, a centrifugal impeller, a channel diffuser and a plenum chamber. The experiments were carried out in an open-loop centrifugal compressor test rig driven by a turbine. For three different diffusers, overall performance data were obtained at 80%, 90% and 97% of design speed. For the initially designed wedge-type diffuser, test results showed that the compressor was operated at a higher mass flow rate than the design requirement. By reducing the diffuser throat area, the compressor operating range was shifted to lower mass flow rate range. The test result of redesigned wedge-type diffuser showed high pressure loss. To reduce the diffuser loss, diffuser inlet radius was increased and airfoil-type of diffuser was adopted. This airfoil-type diffuser showed reasonal results in terms of design requirement.

• Proceedings of the Korean Society of Plant Pathology Conference
• /
• 2003.10a
• /
• pp.113.2-114
• /
• 2003

Five pepper-infecting potyviruses, Pepper mottle virus (PepMoV), Chilli veinal mottle virus (CVMV), Pepper veinal mottle virus (PVMV), Pepper severe mosaic virus (PSMV) and Tobacco each virus (TEV), are known filamentous virus and can be infected pepper crops systemically. To understand pathology and genome information of the five viruses on pepper plants, host reactions and sequences were compared to the 5 viruses. Five potyviruses were inoculated onto some typical cultivars of hot peppers and compared their symptoms, and virus accumulations. A set of degenerate primers for potyviruses were applied to 5 viruses and RT-PCR was performed. RT-PCR products containing partial nuclear inclusion b and coat protein (CP) genes were cloned. Then, oligo dT primer and species-specific primer were redesigned to amplify the C-terminal part of CP and 3' noncoding regions of each viruses. Sequences of the viruses were analyzed and compared to serological relationships among the viruses. The data can be useful for screening of potyviruses in pepper plants and pathogen-derived transgenic pepper plant development.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.13 no.4
• /
• pp.397-402
• /
• 2003

This paper concerns a pulse-width-modulation (PWM) controller design technique using digital redesign. Digital redesign is to convert a well-designed analog controller into an equivalent pulse-amplitude-modulation (PAM) controller maintaining the original analog control system in the sense of state-matching. In similar line of conversion concept, the redesigned PAM controller is converted into a PWM controller using the equivalent area principle. To convincingly visualize the proposed technique, an computer simulation example-attitude control of artificial satellite system is included.

• Journal of The Korean Association of Information Education
• /
• v.10 no.2
• /
• pp.229-239
• /
• 2006

The present study analyzed the effects of Problem-Based Learning (PBL), founded on the constructivist theory, on the problem solving process and computer application ability as to students' level in elementary computer education. According to the PBL model, developed on the basis of previous research and the purpose of the study, the area of 'application of software' in third-grade computer curriculum was redesigned for the three-week period of the experiment. The results of the analyses showed that problem-based learning tended to exert differential effects with regard to students' level on the problem-solving process and computer application ability in computer education. The implications of the study and suggestions for the future study were discussed.