• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.1 no.1
• /
• pp.5-16
• /
• 1991

It was grown Cubic $ZrO_2(10 mol% Y_2O_3)$ single crystals doped with 1 wt% rare earth metal oxides (RE=Ce, Pr, Nd, Eu, Er) by Skull method. It was investigated electrical properties on (111) plane of grown single crystals by Impedance Spectroscopy. It was potted relation between temperature and electrical conductivities and observed the transition at $약300-400^{\circ}$ It was obtained activation energy on the migration of oxygen vacancy between low temperature (before the transition) and high temperature (after the transition till ${\11}500^{\circ}$) and its difference can be seen the activation energy of the formation of oxygen vacancies by break up defect complexes. It was obtained the activation energy according as add yttria and rare earth metal oxides and discussed ionic conduction mechanism. Grown single crystals showed Ce: orange - red, Pr: golden - yellow, Nd: lilac, Eu: light pink, Er: pink due to dopant effect from the light absorption data in the visible range.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.340-343
• /
• 2002

We report here our recent progress in the development and commercialization of polyfluorenes emitting red, green and blue (ROB) colors as materials for light emitting diodes (LEDs). Our patented version of the Suzuki coupling process has been used to synthesize a variety of fluorenebased homopolymers and copolymers emitting colors across the entire visible spectrum. The optical and electronic properties of the polymers are tailored through selective incorporation of different aromatic units into the polyfluorene backbone. Our latest green emitter, reported herein, provides very efficient devices with a low turn-on voltage of 2.25 V, a peak efficiency of 10.5 Cd/A at 6,600 Cd/$m^2$ at 4.85 V. These devices maintain an efficiency of greater than 10 Cd/A up to 50,000 Cd/$m^2$ and demonstrate very good stability as exemplified by a device half-life of greater than 1,500 hours starting from 1,100 Cd/$m^2$. Considerable progress has also been made with red and blue emitters and will be the subject of this presentation.

• Korean Journal of Materials Research
• /
• v.15 no.8
• /
• pp.543-547
• /
• 2005

Organic electroluminescence devices were made from 1,4-bis-(9-anthrylvinyl)benzene (AVB) and 1,4-bis-(9-aminoanthryl)benzene (AAB) anthracene derivatives. Device structure was ITO/AVB/PANI(EB)/Al (multi-layer device) and ITO/AAB:DCM/Al(single-layer device). In these devices, AVB, polyaniline(emeraldine base) (PANI(EB)) and AAB were used as the emitting material. 4-(dicyanomethylene)-2-methyl-6-p-(dimethylamino)styryl-4H -pyran(DCM) was used as red fluorescent dopant. We studied change of fluorescence wavelength with concentration of DCM doped in AAB. The ionization potential (IP) and optical band gap (Eg) were measured by cyclic voltammetry and UV-visible spectrum. We compared with difference of emitting wavelength between photoluminescence and electroluminescence spectrum. In case of the multi-layer device, PANI and AVB EL spectra have similar wave pattern to each PL spectrum and when PAM and AVB were used at the same time, and multi-layer device showed that a balanced recombination and radiation kom PANI and AVB. In case of the single-layer device, with the increase of DCM concentration, the blue emission decreases and red emission increases. This indicates that DCM was excited by the energy transfer from AAB to DCM or the direct recombination at the dopant sites due to carrier trapping, or both. The device with $1.0wt\%$ DCM concentration gave white light.

• Korean Journal of Materials Research
• /
• v.31 no.1
• /
• pp.16-22
• /
• 2021

In this study, quantum dot-sensitized solar cells (QDSSC) using CdSe/ZnS quantum dots (QD) of various sizes with green, yellow, and red colors are developed. Quantum dots, depending their different sizes, have advantages of absorbing light of various wavelengths. This absorption of light of various wavelengths increases the photocurrent production of solar cells. The absorption and emission peaks and excellent photochemical properties of the synthesized quantum dots are confirmed through UV-visible and photoluminescence (PL) analysis. In TEM analysis, the average sizes of individual green, yellow, and red quantum dots are shown to be 5 nm, 6 nm, and 8 nm. The J-V curves of QDSSC for one type of QD show a current density of 1.7 mA/㎠ and an open-circuit voltage of 0.49 V, while QDSSC using three type of QDs shows improved electrical characteristics of 5.52 mA/㎠ and 0.52 V. As a result, the photoelectric conversion efficiency of QDSSC using one type of QD is as low as 0.53 %, but QDSSC using three type of QDs has a measured efficiency of 1.4 %.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.8 no.2
• /
• pp.1-16
• /
• 2006

The purpose of this study was to find out the various impressions that tone-on-tone coloration of shirts and ties gives. This experiment was based on the $2{\times}4{\times}4{\times}2$ factorial design: colors(red and blue), shirt tones(vivid, light, dull, and dark); tie tones(vivid, light, dull, and dark) and perceivers' gender(male and female). The materials in the experiment developed for this study were composed of 32 upper body photographs which were color printed and 27 bi-polar adjectives, each of which was graded into seven in its degree, were used to evaluate the impression. We unified those colors of shirts and neckties, and then made shirt and necktie tone different. The subjects of this research were 192 male and 192 female college students in Gyeongnam province including Jinju City The data was analyzed by using SPSS program. Analyzing methods were one-way ANOVA and LSD test. The items of the adjectives were classified into 5 impression dimensions - potency, activity, attractiveness, visibility and tenderness. All the image by the match of shirt and tie could be possible to make various images by the color, the shirt tone and the tie tone. Blue was given more effective potent image, vivid or light tone shirt in blue was the active image. As shirt and tie had different tone, regarded as the attractive image. Vivid tone tie was evaluated the visible image, light tone shirt is the tend image.

• Current Optics and Photonics
• /
• v.3 no.6
• /
• pp.590-596
• /
• 2019

To improve the color gamut of a liquid-crystal display (LCD), we propose a bandpass filter that is added to the backlight unit to optimize the backlight spectrum. The bandpass filter can only transmit red, green and blue light in the visible range, while reflecting the unwanted light. We study the optical properties of the bandpass filter using the transfer-matrix method, and the effect of the bandpass filter on the color gamuts of LCDs is also investigated. When a bandpass filter based on a 5-layer configuration comprising low and high refractive indices ((HL)²H) is used in phosphor-converted white-light-emitting diode (pc-WLED), K₂SiF₆:Mn⁴⁺ (KSF-LED), and quantum-dot (QD) backlights, the color gamuts of the LCDs improve from 72% to 95.3% of NTSC, from 92% to 106.7% of NTSC, and from 104.3% to 112.2% of NTSC respectively. When the incident angle of light increases to 30°, the color gamuts of LCDs with pc-WLED and KSF-LED backlights decrease by 2.9% and 1% respectively. For the QD backlight, the color gamut almost does not change. When the (HL)²H structure is coated on the diffusion film, the color gamut can be improved to 92.6% of NTSC (pc-WLED), 105.6% of NTSC (KSF-LED), and 111.9% of NTSC (QD). The diffusion film has no obvious effect on the color gamut. The results have an important potential application in wide-color-gamut LCDs.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.5
• /
• pp.523-528
• /
• 2023

The applicability as a material to improve solar cell performance was reviewed by synthesizing a phosphor that emits red wavelengths by a liquid synthesis method using a metal salt aqueous solution and a polymer medium as a starting material. An aqueous solution was prepared using nitrate of metals such as Ca, Zn, Al, and Eu, and a precursor impregnated with starch, a natural polymer, was sintered to synthesize CaZnAlO:Eu phosphor powder. The surface structure and composition analysis of the synthesized CaZnAlO:Eu phosphor powder were analyzed by scanning electron microscope(SEM) and energy-dispersed X-ray spectroscopy(EDS). The crystal structure of CaZnAlO:Eu phosphor particles was analyzed by an X-ray diffraction analyzer (XRD). As a result of measuring the photoluminescence(PL) characteristics of the phosphor, it was confirmed that a red phosphor with a light emitting wavelength of 650-780nm was successfully synthesized. According to SEM and EDS analysis, the synthesized Ca₁₄Zn₆Al_9.93O₃₅:Eu³⁺_0.07 phosphor powder has a uniform particle size, and Eu ions used as an activator are present. The synthesized CZA:Eu³⁺ phosphor can be used as a material that can increase the light absorption efficiency of the solar cell by converting ultraviolet or visible light down conversion into a wavelength in the near-infrared region.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.2
• /
• pp.443-449
• /
• 2015

In this paper, we proposed Channel allocation scheme according to the user's location with IR. In VLC System, LED can generate various colors of light by controlling the mixing ratio of each individual RGB color element. Thus, each RGB channel will have a different signal power, and each channel will have different performance. This proposed system using Visible light(RGB) as way to transmit signals, it depends on the mixture RGB, which decided the color of light, moreover, each things determined their performance. However, if the signal were fixed allocated RGB to transmit such as the original system, the importance of the each signals a different occur the limit on the quality of signals. To solve this problem in this paper, according to the RGB mixture ratios analyze the performance for the LED, which analyzed based on allocating the signal by transmitting to improve the quality was about how researched. In addition, our proposed system is able to improve the performance of BER and satisfied the Qos to desire users.

• The Research Journal of the Costume Culture
• /
• v.15 no.3 s.68
• /
• pp.496-509
• /
• 2007

The purpose of this research is to find out the effect of a chromatic Korean jacket and an achromatic Korean skirt on the visual image of a traditional Korean dress wearer. This experiment was designed to the 3 factors which were composed of 3 colors(red, yellow, green), 4 jacket tones(vivid, light, dull, dark), and 4 skirt colors(N9, N7, N4, N2). The 288 students in Gyeongsang National University assessed the 48 stimuli which wear variously incorporated with colors and tones by a semantic differential scale of 7-point: The results of the study were as follows. Image factors of stimuli are youth and activity, gracefulness, visibility, and tenderness. Among these, youth and activity factors, and gracefulness factors proved to be important. The colors and tones of a jacket and a skirt used in this experiment showed that the colors and tone had an effect on dimension of 4 images by interacting of two valuables or working independently. While a yellow jacket with vivid and a white(N9) skirt had a significant effect on youth and activity factors, a red jacket and a dark- gray(N4), -black(N2) skirt were evaluated as a graceful image. In the red jacket case, a visible factor was considerably different according to skirt tones. Only jacket tones worked as a striking clue in a tenderness factor.

• The Korean Journal of Mycology
• /
• v.24 no.3 s.78
• /
• pp.167-175
• /
• 1996

The objective of this research was to determine the effect of light quality on formation of fruit body primordia (FBPs) of Ganoderma lucidum. To achieve this 5 isolates of the fungus that develops fruit body primordia on nutrient agar media were incubated with or without continuous irradiation. The fluorescent lamps used different colors such as black light blue (BLB), pure blue (P-B), pure green (P-G), pure yellow (P-Y) and pure red (P-R). Effect of periodic light and dark exposures on FBP formation of isolate Gl-009 was investigated. The FBP formation in G. lucidum isolates was also tested under monochromatic light produced by the combination of interference filters and colored glass filters. Three isolates produced FBPs under all kinds of fluorescent lamps, whereas two induced FBPs only under visible light except for BLB fluorescent lamp. However, these isolate did not form FBPs in the dark. The FBP was formed at light intensity from 0.05 to $10.0\;{\mu}mol\;m^{-2}s^{-1}$, and begun to reduce its number as light intensity increase over $0.5\;{\mu}mol\;m^{-2}s^{-1}$. When the isolate was incubated under periodic light and dark exposures, the number and weight of FBP increased as compared with those under continuous light. Initiation of FBP requires at least 4 days of light illumination. Although isolate Gl-003 produced FBPs in a wide range of 400 to 800 nm, other four isolates had two effective regions 400 to 500 nm and 700 to 750 nm in FBP formation.