• 펄프종이기술
• /
• 제39권4호
• /
• pp.14-20
• /
• 2007

The effects of blending starches with different gelatinization temperatures on the development of ply-bond strength were systematically investigated using a three component mixture design technique. Oxidized corn starches with different gelatinization temperatures were blended with natural corn starch and sprayed for plybonding. Optimum blend ratio for maximizing plybond strength improvement for the starch blends was 40% of natural starch, 27% of oxidized starch with low gelatinization temperature and 33% of oxidized starch with high gelatinization temperature. Starch granules with the lowest gelatinization temperature gelatinizes at the lowest temperature, while the natural corn starch gelatinizes at later stage of drying. The improvement of plybond strength with starch blends were verified on machine trial as well. Plybond strength improvement obtained from the machine trial was lower than that achievable with handsheets, which was attributed to the lower internal bond strength of the linerboards made from recycled fibers.

• 한국정밀공학회지
• /
• 제20권4호
• /
• pp.165-173
• /
• 2003

As the cycling time of new products have become more and more short in recent years, the demand for lowering the cost and reducing the production time becomes stronger. In order for the demand, the rapid prototyping and rapid tooling technology have been used. It has been widely known that RP technology has advantages with fabricating 3-D object having a complicated geometric shape. RP products, however, have a limitation with applying to the real die and mold because soft materials such as resin, paper and wax has been mostly used in RP technology. So in this paper, the RP products have been copied to semi-metallic soft tools using the mixture of metal fillers and epoxy resin. In order to evaluate the effect of the fillers on the characteristics of semi-metallic soft tools, three fillers are used including commercial aluminum powder, cast iron powder recycled by machining chips, and aluminum short fiber made by self-excited vibration technique. Besides, in the case of aluminum powder, the change of characteristics of semi-metallic soft tools is also tested according to the volume fraction of the powder.

• 펄프종이기술
• /
• 제32권3호
• /
• pp.18-24
• /
• 2000

To evaluate the efficiency of various cationic starches in improving retention drainage and strength properties of newsprints which are being made using extensive amount of domestic recycled wastepapers in a highly closed papermaking system diverse cationic starches have been prepared and tested. In the case of cationic starches with low charge density as the degree of substitution increas-es fines retention increased. Results also showed that the retention efficiency decreased sub-stantially for cationic starches with low DS when the conductivity of white water inceased. Tensile strength increased with the addition of cationic starches and then decreased. On the other hand internal bonding strength increased linearly with the addition of cationic starch. Oxidizing treatment of cationic starch was detrimental for retention and freeness improve-ment. Also crosslinking treatment of wet processed cationic starches made cationic starches less effective in retention and drainage.

• 펄프종이기술
• /
• 제32권4호
• /
• pp.27-33
• /
• 2000

A new technique for fractionating pulp stock into a long fiber portion and fines fraction was developed by KRICT in order to enhance the drainage and strength properties of recycled OCC pulp. In order to investigate the effect of fines contents in stock and stages of flotation on fractionation efficiency, flotations were performed at varied fines contents and flotation stages. Based on the result of multi-stage flotation fractionation it could be said that fines smaller than 15${\mu}{\textrm}{m}$ stabilize flotation froth of OCC. Although the amounts and the fines contents of flotation reject could be increased by multi-stage flotation fractionation of OCC, flotation stages more than 3 times were found to be inefficient in terms of fines concentrating degree. In order to satisfy the both conditions of reducing long fiber loss and of increasing flotation reject, several kinds of fractionating promoters were searched and investigated. And high molecular weight cationic polyacrylamide was chosen as a long fiber flocculating and flotation froth-stabilizing agent.

• 한국세라믹학회지
• /
• 제51권2호
• /
• pp.132-137
• /
• 2014

The study was performed with low-grade limestone, which is used to make cement or is disposed of due to its low CaO content. In this study, the optimal condition of limestone with which to manufacture precipitated calcium carbonate (PCC) and limestone in fiber was determined through in-situ reactions. The best firing condition is with slaked lime with rapid cooling after 2 h of firing at $1000^{\circ}C$. In addition, the content of CaO can be increased by sorting the low-grade limestone using a 200 mesh filter, and the optical quality of old newspaper (ONP) was similar when using both low-grade and high-grade limestone. Also, controlling the particle size of PCC is an important factor pertaining to the optical characteristics of paper.

• Computers and Concrete
• /
• 제26권6호
• /
• pp.515-531
• /
• 2020

Due to the construction difficulties of steel reinforced concrete (SRC), a new composite structure of steel and steel fiber reinforced concrete (SSFRC) is proposed for solving construction problems of SRC. This paper aims to investigate the bond properties and composition of interfacial bond stress between steel and steel fiber reinforced concrete. Considering the design parameters of section type, steel fiber ratio, interface embedded length and concrete cover thickness, a total of 36 specimens were fabricated. The bond properties of specimens were studied, and three different methods of calculating interfacial bond stress were analyzed. The results show: relative slip first occurs at the free end; Bearing capacity of specimens increases with the increase of interface embedded length. While the larger interface embedded length is, the smaller the average bond strength is. The average bond strength increases with the increase of concrete cover thickness and steel fiber ratio. And calculation method 3 proposed in this paper can not only reasonably explain the hardening stage after the loading end curve yielding, but also can be applied to steel reinforced high-strength concrete (SRHC) and steel reinforced recycled coarse aggregate concrete (SRRAC).

• Korean Chemical Engineering Research
• /
• 제62권1호
• /
• pp.87-98
• /
• 2024

본 연구는 리그노셀룰로오스 섬유와 굴참나무 수피-기반 활성탄(COA)으로 제조한 3층 섬유판에 한지를 조합하여 제작한 섬유판 필터세트의 미세먼지(PM), 휘발성 유기화합물(TVOC), 폼알데하이드(HCHO) 여과능을 조사하기 위하여 수행하였다. 단백질계 접착제를 적용하여 표층에 목섬유 그리고 심층에 재생섬유/COA로 제조한 섬유판(WRF)과 한지로 제작한 섬유판 필터세트는 일반향의 연소에 의하여 발생하는 상기 오염물질을 효과적으로 여과하였다. 섬유판 제조에 있어 표층/심층에 적용되는 접착제의 함지율을 4%/4%, 5%/3%, 6%/2%로 조절하여 WRF를 제조한 후, 이를 한지와 함께 WRF-기반 필터세트 제작에 이용하였다. 이 필터세트의 PM, TVOC, HCHO 여과능은 심층의 함지율이 감소함에 따라 향상되었다. 한편 WRF-기반 필터세트 구성에 있어 45 g/m² 평량의 한지보다 25 g/m² 평량의 한지(KP-25g)를 사용하여 제작한 필터세트에서 여과능이 우수하였다. 표층에 재생섬유와 심층에 목섬유/COA로 제조한 섬유판(RWF)과 KP-25g로 구성한 섬유판 필터세트의 여과능은 WRF와 비교하여 높았다. 소형 실내공간 및 대형 옥외공간에 WRF-기반 섬유판 필터세트 및 무필터 조건과 함께 측정한 PM 및 TVOC 여과능은 RWF-기반 섬유판 필터세트에서 높았다. 따라서 RWF와 KP-25g를 조합하여 제작한 섬유판 필터세트가 실내외 공간에 존재하는 PM, TVOC 여과용 필터로서 적용이 가능할 것으로 생각한다.

• 펄프종이기술
• /
• 제44권4호
• /
• pp.85-90
• /
• 2012

Wet pressing process has great influence not only on the paper properties but also on the efficiency of total manufacturing process including energy efficiency. The slow drainage propensity of old corrugated container(OCC) might require more complicated control of wet pressing process. In this study, the change in press efficiency and in structure of wet sheet by the various condition of laboratory roll press simulator were evaluated to provide background information about wet pressing of OCC. The higher pressure and the slower machine speed resulted in higher efficiency of wet pressing but the change trends of dryness depending on the wet press pressure and machine speed were shown differently according to OCC treatment. The effects of water contents of felt on the wet press efficiency and sheet structure were also investigated. The higher contents of water in felt resulted in less removal of water generally and the crushed structure of wet sheet were appeared especially at higher pressure.

• 한국건설순환자원학회논문집
• /
• 제5권2호
• /
• pp.185-191
• /
• 2017

본 연구는 고로슬래그 기반 모르타르에 잠재수경성 반응을 유도하기 위해 자극제로써의 역할로 WRP 및 FGD를 활용하고, 이에 탈취 및 흡착성분을 지닌 천연재료인 일라이트를 활용하여 기능성을 부여한 모르타르 환경에서 결합재 치환율 변화에 따른 모르타르의 유동성 및 강도특성을 분석하고자 한다. 실험결과, 플로는 일라이트 및 결합재 치환율이 증가할수록 유동성은 감소하는 것으로 나타났다. 공기량은 OPC와 결합재를 치환하지 않은 BSC 45를 사용한 배합 보다 BSC 65를 사용한 배합에서 낮은 공기량을 나타내었으며, 일라이트를 1% 치환한 경우 WRP 분말 및 FGD의 공기량은 서로 유사한 값을 나타냈으며, 일라이트 0%보다 전체적인 배합은 낮은 공기량을 나타내었다. 휨강도 및 압축강도의 경우는 일라이트를 치환할 시 강도는 낮아졌으며, WRP 및 FGD 치환율이 증가할수록 잠재수경성 반응으로 인해 강도는 증가하는 경향을 나타내었다. pH는 전반적으로 재령 7일까지 증가하는 경향을 나타내었고, 재령 28일의 경우에는 감소하는 경향을 나타내었으며, 일라이트를 치환율 시 미소하게 감소하는 경향을 나타내었다. 따라서, 유동성 및 강도특성 측면을 종합적으로 고려할 때 WRP 5%, FGD 5% 치환사용하는 경우가 최적의 배합인 것으로 판명되었다.

• 펄프종이기술
• /
• 제41권2호
• /
• pp.55-63
• /
• 2009

This study was performed to evaluate the heavy metal contents in various packaging board. Domestic and foreign OCC (old corrugated containers) and old duplex boards were used as raw materials. Tests were made for the printed and unprinted parts of the sample. Heavy metal contents of old food packaging boards made from virgin pulp fibers were also evaluated. The contents of heavy metals including lead (Pb), cadmium (Cd), barium (Ba), arsenic (As), antimony (Sb), selenium (Se), and mercury (Hg) were determined using ICP-AES (Inductively Coupled Plasma - Atomic Emission Spectrometer), and CV-AAS (Cold vapor-atomic absorption spectrometer) after digesting the samples in a microwave oven. The contents of heavy metals contained in domestic packaging board were higher than those in overseas samples, and OCC showed higher contents of heavy metals than old duplex boards. Printed parts gave greater heavy metal contents than unprinted parts. Results indicate that recycling of paper and paperboard products increases the heavy metal contamination of the paper packaging products and this derives mostly from the heavy metals contained in printing inks. Recycling processes that decrease heavy metals in recycled fibers and new printing inks that contains less heavy metals should be developed to solve the problem associated with the heavy metals in packaging paper products.