• 제목/요약/키워드: Recycled Fine Aggregate

검색결과 316건 처리시간 0.02초

페로니켈 슬래그 미분말이 ASR에 미치는 영향 (Effect on Ferronickel Slag Powder in ASR)

  • 김민석;서우람;이석근
    • 한국건설순환자원학회논문집
    • /
    • 제10권1호
    • /
    • pp.9-14
    • /
    • 2022
  • 기존의 페로니켈 슬래그에 관한 연구는 대부분 골재 및 잔골재로서의 가능성에 초점이 맞추어져 수행되었으나 본 연구는 페로니켈 슬래그 미분말의 콘크리트 혼화재로서의 가능성에 주목하여 수행하였다. Fly ash, 고로슬래그 및 FPS 등을 각각 10 %씩 혼입한 콘크리트에 대해 미국의 ASTM C 1260을 준용하여 반응성을 평가하였다. 그 결과, 대조군과 비교해 Fly ash는 8.43 %, 고로슬래그 미분말은 14.46 % 팽창률이 감소했지만, 페로니켈 슬래그 미분말은 49.40 %의 팽창률 감소세를 보였다. 골재의 반응성 억제 측면에서 충분히 Fly ash, 고로슬래그 등 기존의 혼화재를 대체할 수 있음을 확인하였으나, SEM 분석결과 수많은 에트린자이트(ettringite)가 생성되었고 이것이 콘크리트에 어떤 영향을 주는지에 대한 추가적인 연구가 필요하다.

콘크리트용 골재로서의 Bottom Ash 활용성 평가 (Evaluation of Bottom Ash on the Application for the Aggregate of Concrete)

  • 김상철
    • 한국건설순환자원학회논문집
    • /
    • 제5권2호
    • /
    • pp.105-115
    • /
    • 2010
  • 산업의 발전과 함께 산업폐기물의 증가와 그에 따른 처리할 회사장 부족, 유해한 성분 함유로 인한 환경상의 문제 등에 대한 해결 방안의 일환으로, 본 연구에서는 석탄 화력발전소에서 발생되는 석탄회 중에서 bottom ash를 대상으로 콘크리트용 골재로서의 유용성 여부를 평가하고자 하였다. 먼저 잔골재와 굵은 골재의 대체재로서의 적절성 평가를 위해 경도시험, 입도분포시험, 흡수량시험, S.E.M 분석시험 등의 물리적 시험을 수행하였고, 화학적 시험으로는 강열감량시험, X-ray를 통한 분석시험을 수행하였다. 콘크리트에 적용하였을 때 미치는 영향은 대체재로서의 비율을 달리하여 작업성 확보차원에서 슬럼프의 변화를 측정하였고, 굳은 콘크리트에서는 강도확보, 내투수성, 동결융해 저항성, 내황산성, 탄산화 저항성에 대해 평가하였다. 실험결과, 미립분의 부족과 일부 bottom ash에서 결속력 상의 문제가 존재하였으나 천연골재와 혼합하여 사용하고 배출시 공정 개선을 한다면 골재로써 충분히 사용성이 있는 것으로 평가되었다. 또한, 다공성을 갖고 있어 작업성 확보를 위해서는 단위수량이나 감수제의 증가가 요구되지만 일반강도 한도 내에서는 일정 비율로 천연골재와 혼합하여 사용하면 강도 확보에 문제가 없고 오히려 내구성 확보에 있어서는 유리한 것으로 나타났다.

  • PDF

폐 PET 병을 경량콘크리트용 잔골재로 재활용하기 위한 실험적 연구 (An Experimental Study for Recycling of the Waste PET Bottle as a Fine Aggregate for Lightweight Concrete)

  • 최연왕;문대중;정문영;조선규
    • 콘크리트학회논문집
    • /
    • 제16권1호
    • /
    • pp.79-87
    • /
    • 2004
  • 폐 PET 병을 재활용하여 경량콘크리트용 잔골재로 활용하기 위하여 폐 PET 병 활용 경량골재(WPLA)의 품질 및 WPLA를 사용한 콘크리트(WPLAC)의 유동성, 단위용적 중량, 공기량 및 강도특성에 대하여 검토하였다. WPLA의 품질을 검토한 결과 WPLA를 $50\%$ 이하로 치환하는 것이 바람직하며, WPLA를 $50\%$ 치환한 경우 잔골재의 비중 및 흡수율이 강모래보다 각각 23 및 $75\%$ 정도 크게 감소하였으며, 콘크리트의 제물성에 크게 영향을 미쳤다. nU를 치환한 굳지 않은 콘크리트의 워커빌리티는 WPLA 치환율 및 물-시멘트비가 클수록 향상되었으며, 잔골재의 비중이 2.6에서 1.7로 감소함에 따라 콘크리트의 슬럼프 증가율은 약 $45 {\~} 120\%$로 나타났다. WPLA를 $75\%$치환한 콘크리트의 단위용적중량은 보통 콘크리트 보다 약 $17\%$ 정도 감소하였다. WPLA를 25 및 $50\%$ 치환한 콘크리트의 재령 28일 압축강도는 물-시멘트비 변화(W/E=B5 49 및 $53\%$)에 관계없이 30MPa를 상회하였으며, WPLA $25\%$ 치환 콘크리트의 비강도는 물-시멘트비 $49\%$에서 $15.11{\times}10^3 MPa{\cdot}m^3/kg$로 보통콘크리트보다 크게 나타났다. 재령 조일 압축강도, 인장강도 및 탄성계수와의 비는 일반 경량콘크리트와 비슷한 경향을 보였다. 이상의 결과로 WPLA를 경량 콘크리트용 잔골재로 활용하는 것이 가능하다고 판단된다.

고로슬래그 미분말의 산지 및 치환율 변화가 순환잔골재 사용 시멘트 모르타르의 특성에 미치는 영향 (Effect of the Replacement Ratio and Sources of Blast Furnace Slag Powder on the Fundamental Properties of Recycled Fine Aggregates Based Mortar)

  • 한천구;자오양
    • 한국건축시공학회지
    • /
    • 제15권3호
    • /
    • pp.257-263
    • /
    • 2015
  • 본 연구에서는 우리나라에서 생산되는 고로슬래그 미분말(BS)의 품질특성과 BS의 치환율 변화가 순환골재 사용 시멘트 모르타르의 공학적 특성에 미치는 영향 및 BS 품질 특성치와 모르타르의 공학적 특성치간의 상관성을 분석하고자 하였다. 분석결과 먼저 BS 품질특성은 9개 항목 중 4개 항목에서 불만족하는 공장이 존재하였는데, 이중에서도 분말도의 개선이 제일 중요하게 요구되었다. 또한, BS의 치환율이 증가할수록 순환골재사용 시멘트모르타르의 유동성은 증가하였으나 응결지연, 초기강도가 저하하는 문제는 존재하였으나, 단 잠재수경성반응으로 후기재령에서는 증가하였다. BS의 품질특성치와 시멘트 모르타르의 공학적 특성치간의 관계에서 이수석고와 관련하는 $SO_3$ 및 L.O.I는 응결시간, 3 및 91일 압축강도와 미약하지만 어느 정도 상관성이 있는 것으로 분석되었다.

Fundamental Properties of Mortar and Concrete Using Waste foundry Sand

  • Moon Han-Young;Choi Yun-Wang;Song Yong-Kyu;Jeon Jung-Kyu
    • 콘크리트학회논문집
    • /
    • 제17권1호
    • /
    • pp.141-147
    • /
    • 2005
  • The development of automobile, vessel, rail road, and machine industry leads an increase of foundry production used as their components, which cause a by-product, waste foundry sand (WFS). The amount of the WFS produced in Korea is over 700,000 tons a year, but most WFS has been buried itself and only $5{\~}6\%$ WFS is recycled as construction materials. Therefore, it is necessary for most WFS to research other ways which can be used in a higher value added product. The study on recycling it as a fine aggregate for concrete or green sand has been in progress in America and Japan since 1970s and 1980s respaectively. In this study, two types of WFS were used as a fine aggregate for concrete. Nine types of concrete aimed at the specified strength of 30 MPa were mixed with washed seashore coarse sand in which salt was removed, and WFS and then appropriate mixture proportion of concrete was determined. Moreover, basic properties such as air contents, setting time, bleeding, workability and slump loss of the fresh concrete with WFS were tested and compared with those of the concrete mixed without WFS. In addition, both compressive strength of hardened concrete at each ages and tensile strength of it at the age of 28 days were measured and discussed.

Combined effect of lightweight fine aggregate and micro rubber ash on the properties of cement mortar

  • Ibrahim, Omar Mohamed Omar;Tayeh, Bassam A.
    • Advances in concrete construction
    • /
    • 제10권6호
    • /
    • pp.537-546
    • /
    • 2020
  • Exterior walls in buildings are exposed to various forms of thermal loads, which depend on the positions of walls. Therefore, one of the efficient methods for improving the energy competence of buildings is improving the thermal properties of insulation plaster mortar. In this study, lightweight fine aggregate (LWFA) and micro rubber ash (MRA) from recycled tires were used as partial replacements for sand. The flow ability, unit weight, compressive strength, tensile strength, thermal conductivity (K-value), drying shrinkage and microstructure scan of lightweight rubberized mortar (LWRM) were investigated. Ten mixtures of LWRM were prepared as follows: traditional cement mortar (control mixture); three mixes with different percentages of LWFA (25%, 50% and 75%); three mixes with different percentages of MRA (2.5%, 5% and 7.5%); and three mixes consisting both types with determined ratios (25% LWFA+5% MRA, 50% LWFA+5% MRA and 75% LWFA+5% MRA). The flow ability of the mortars was 22±2 cm, and LWRM contained LWFA and MRA. The compressive and tensile strength decreased by approximately 64% and 57%, respectively, when 75% LWFA was used compared with those when the control mix was used. The compressive and tensile strength decreased when 5% MRA was used. By contrast, mixes with determined ratios of LWFA and MRA affected reduced unit weight, K-value and dry shrinkage.

개질처리 제강슬래그를 혼합한 굳지않은 콘크리트의 재료분리 (The Segregation of Concrete Containing Atomized Steel Slag Fine Aggregate)

  • 문한영;유정훈;정철희
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
    • /
    • pp.600-603
    • /
    • 2004
  • Recently, the river sands are in short supply. Gathering sea-sand will be faced with difficulty. Alternative aggregates for concrete are estimated by many researchers. The aggregates are blast furnace slag, steel slag, copper slag, ferro-nickel slag and recycled aggregate and etc. Nevertheless steel slag has been limited in practical use due to its expansibility which is occurred reaction with water and free CaO in slag. Most recently stable management method is to minimize the expansibility researched and developed. First of all, slump, air content, compressive strength and flexural strength are measured in concrete. An estimate is made of the segregation of concrete containing atomized steel slag by Image Analyser program.

  • PDF

제강슬래그 잔골재 사용 모르타르의 역학적 특성에 대한 고찰 (A Study on the Mechanical Properties of Mortar Using Steen Slag Fine Aggregate)

  • 문한영;유정훈;박영훈;강정용;정문철;송준혁
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2003년도 가을 학술발표회 논문집
    • /
    • pp.322-325
    • /
    • 2003
  • Recently, as quality river aggregates like sands and gravels become scarce, use of crushed stones and sands, seashore sands, and seashore gravels is increasing abruptly. And, aggregates recycled from slags and waste concretes are used. However, since the converter slag easily expands and breaks due to free lime, differently from the blast-furnace slag, it is not suitable for use as concrete aggregates. Since the atomized steel slag aggregate has slippery surface and spherical shape, the mortar flowing characteristics improved as the atomized steel slag content increases, without regard to the aggregates coarseness and water/cement ratio. The flow characteristics loss rate of the mortar manufactured from steel slag aggregates was similar to that of the mortar manufactured from washed sand only. The compact strength of the mortar manufactured from coarse PS Ball were larger than that manufactured from washing sand only.

  • PDF

산 처리 골재가 시멘트 모르타르의 압축강도에 미치는 영향 (Effect of acid-treatment aggregate on compressive strength of cement mortar)

  • 시이현;장인동;이종구
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2019년도 추계 학술논문 발표대회
    • /
    • pp.151-152
    • /
    • 2019
  • This study is aimed at comparing the effect of cement mortar made of sulfuric acid treated ISO standard sand with that of cement mortar made of normal ISO standard sand. In the water absorption test, water absorption of standard sand increases with the increase of immersion time in sulfuric acid solution. The results show that at the water cement ratio of 0.5, the longer the standard sand is immersed in sulfuric acid, the greater the compressive strength of the cement mortar sample.

  • PDF

알칼리 자극제로서 미분시멘트와 순환골재가 고로슬래그 다량치환 콘크리트의 공학적 특성 및 미세구조에 미치는 영향 (Effect of Fine Particle Cement and Recycled Aggregates as Alkali Activator on the Engineering Properties and Micro-Structure of High Volume Blast Furnace Slag Concrete)

  • 한민철;이향재;한천구
    • 한국건축시공학회지
    • /
    • 제13권6호
    • /
    • pp.602-608
    • /
    • 2013
  • 본 연구에서는 BS다량 치환 콘크리트의 알칼리자극제로서 순환골재 및 고분말도의 FC를 복합 사용한 콘크리트의 제반 공학적 특성 및 미시적 분석을 실시하였다. FC 치환에 따른 슬럼프 및 공기량은 큰 차이가 없었으며, 응결시간은 FC 치환에 따라 비례적으로 단축되는 것으로 나타났다. FC 치환에 따른 압축강도는 고분말도의 FC가 치환됨에 따라 촉진된 수화반응 및 순환골재의 미수화 시멘트의 알칼리 용출로 인해 BS의 잠재수경성 반응을 촉진시켜 초기 및 28일 재령에서의 Plain 대비 강도저하를 상당부분 회복할 수 있었으며, 특히 향후 재령이 경과함에 따라 포졸란 반응의 활성화로 추가적인 강도향상이 기대된다. 탄산화 저항성의 경우 큰 차이가 없으며, 세공분포의 경우 FC 치환률이 증가함에 따라 $0.1{\mu}m$이하의 미세 공극분포가 급격히 증가하는 경향을 보였고, SEM 측정결과 FC 치환에 따른 7일 및 28일에서의 C-S-H 및 $Ca(OH)_2$의 생성을 확인하여 FC가 BS 다량치환 순환골재 콘크리트의 알칼리 자극에 기여함을 확인 할 수 있었다.