Browse > Article
http://dx.doi.org/10.12989/acc.2020.10.6.537

Combined effect of lightweight fine aggregate and micro rubber ash on the properties of cement mortar  

Ibrahim, Omar Mohamed Omar (Department of Civil Construction and Architecture, Faculty of Technology and Education, Suez University)
Tayeh, Bassam A. (Civil Engineering Department, Faculty of Engineering, Islamic University of Gaza)
Publication Information
Advances in concrete construction / v.10, no.6, 2020 , pp. 537-546 More about this Journal
Abstract
Exterior walls in buildings are exposed to various forms of thermal loads, which depend on the positions of walls. Therefore, one of the efficient methods for improving the energy competence of buildings is improving the thermal properties of insulation plaster mortar. In this study, lightweight fine aggregate (LWFA) and micro rubber ash (MRA) from recycled tires were used as partial replacements for sand. The flow ability, unit weight, compressive strength, tensile strength, thermal conductivity (K-value), drying shrinkage and microstructure scan of lightweight rubberized mortar (LWRM) were investigated. Ten mixtures of LWRM were prepared as follows: traditional cement mortar (control mixture); three mixes with different percentages of LWFA (25%, 50% and 75%); three mixes with different percentages of MRA (2.5%, 5% and 7.5%); and three mixes consisting both types with determined ratios (25% LWFA+5% MRA, 50% LWFA+5% MRA and 75% LWFA+5% MRA). The flow ability of the mortars was 22±2 cm, and LWRM contained LWFA and MRA. The compressive and tensile strength decreased by approximately 64% and 57%, respectively, when 75% LWFA was used compared with those when the control mix was used. The compressive and tensile strength decreased when 5% MRA was used. By contrast, mixes with determined ratios of LWFA and MRA affected reduced unit weight, K-value and dry shrinkage.
Keywords
lightweight; rubber; mortar; thermal conductivity; shrinkage;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Topcu, I. (1995), "The properties of rubberized concretes", Cement Concrete Res., 25(2), 304-310. https://doi.org/10.1016/0008-8846(95)00014-3.   DOI
2 Trilok, G., Sandeep, C. and Ravi, K.S. (2014), "Assessment of mechanical and durability properties of concrete containing waste rubber tire as fine aggregate", Constr. Build. Mater., 73, 562-574. http://dx.doi.org/10.1016/j.conbuildmat.2014.09.102.   DOI
3 Turatsinze, A. and Garros, M. (2008), "On the modulus of elasticity and strain capacity of Self-Compacting Concrete incorporating rubber aggregates", Resour. Conserv. Recyc., 52, 1209-1215. https://doi.org/10.1016/j.resconrec.2008.06.012.   DOI
4 Widodo, S., Maarif, F. and Gan, B.S. (2017), "Thermal conductivity and compressive strength of lightweight mortar utilizing pumice breccia as fine aggregate", Procedia Eng., 171, 768-773. https://doi.org/10.1016/j.proeng.2017.01.446.   DOI
5 Yu, Y. and Zhu, H. (2016) "Influence of rubber size on properties of crumb rubber mortars", Mater., 9, 1-12. https://doi.org/10.3390/ma9070527.   DOI
6 Yu, Y. and Zhu, H. (2019), "Effects of rubber size on the cracking resistance of rubberized mortars", Mater., 12, 1-12. https://doi.org/10.3390/ma12193132.   DOI
7 Alaloul, W.S., Musarat, M.A., Tayeh, B.A., Sivalingam, S., Rosli, M.F.B., Haruna, S. and Khan, M.I. (2020), "Mechanical and deformation properties of rubberized engineered cementitious composite (ECC)", Case Stud. Constr. Mater., 13, 1-13. https://doi.org/10.1016/j.cscm.2020.e00385.   DOI
8 Albano, C., Camacho, N., Reyes, J., Feliu, J.L. and Herna, N.M. (2005), "Influence of scrap rubber addition to Portland I concrete composites: destructive and non-destructive testing", Compos. Struct., 71, 439-446. https://doi.org/10.1016/j.compstruct.2005.09.037.   DOI
9 Ali, A., Aliabdo, A.M. and Abd-Elmoaty, H.H.H. (2013), "Utilization of crushed clay brick in cellular concrete production", Alex. Eng. J., 53, 119-130. http://dx.doi.org/10.1016/j.aej.2013.11.005.   DOI
10 ASTM (2009), C150. Standard Specification for Portland Cement.
11 ASTM (2017), C494/C494M-17, Standard Specification for Chemical Admixtures for Concrete.
12 ASTM (2020), C897-15, Standard Specification for Aggregate for Job-Mixed Portland Cement-Based Plasters.
13 ASTM C177-19, Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus, ASTM International, West Conshohocken, PA.
14 Ayesha, S., Abdullah, Md., Rayed, A., Mugahed, A.Y.H. and Farhad, A.H.A. (2019), "Properties and utilizations of waste tire rubber in concrete: A review", Constr. Build. Mater., 224, 711-731. https://doi.org/10.1016/j.conbuildmat.2019.07.108.   DOI
15 Fadiel, A., Al Rifaie, F., Abu-Lebdeh, T. and Fini, E. (2014), "Use of crumb rubber to improve thermal efficiency of cement-based materials", Am. J. Eng. Appl. Sci., 7, 1-11. https://doi.org/10.3844/ajeassp.2014.1.11.   DOI
16 Canova, J.A., Bergamasco, R., Angelis Neto, G.D. and Gleize, P.J.P. (2012), "Comparative analysis of the properties of composite mortar with addition of rubber powder from worn tires", Ambiente Construido, 12(1), 257-267. https://doi.org/10.1590/S1678-86212012000100017.   DOI
17 ECP 203-2016 (2016), Egyptian Code, Housing and Building Research Center, Cairo, Egypt.
18 Egyptian Standard Specification ESS (2009), No. 4756.
19 Hunag, L., Wang, H. and Wang, S. (2015), "A study of the durability of recycled green building materials in lightweight aggregate concrete", Constr. Build. Mater., 96, 353-359. https://doi.org/10.1016/j.conbuildmat.2015.08.018.   DOI
20 Ilker, B.T. and Abdullah, D. (2007), "Durability of rubberized mortar and concrete", J. Mater. Civil Eng., 19, 173-178. https://doi.org/10.1061/ASCE0899-1561200719:2173.   DOI
21 Najim, K.B. and Hall, M.R. (2012), "Mechanical and dynamic properties of self-compacting crumb rubber modified concrete", Constr. Build. Mater., 27, 521-530. https://doi.org/10.1016/j.conbuildmat.2011.07.013.   DOI
22 Jie, Y., Jun, W., Feng, X., Hao, L. and Yunzhang, L. (2019), "Assessment of building external wall thermal performance based on temperature deviation impact factor under discontinuous radiant heating", J. Therm. Sci., 28, 1129-1140. https://doi.org/10.1007/s11630-019-1173-x   DOI
23 Khaloo, A.R., Dehestani, M. and Rahmatabadi, P. (2008), "Mechanical properties of concrete containing a high volume of tire-rubber particles", Waste Manage., 28, 2472-2482. https://doi.org/10.1016/j.wasman.2008.01.015.   DOI
24 Li, Z. and Li, X. (2007), "Development of thermal insulation materials with granular phase change composite. In: Advances in construction materials", Berlin Heidelberg, 741-748. https://doi.org/10.1007/978-3-540-72448-3_75.   DOI
25 Min-Hong, Z., Lian, L. and Paramasivam, P. (2005), "Shrinkage of high-strength lightweight aggregate concrete exposed to dry environment", ACI Mater. J., 102(2), 86-92.
26 Mohamadien, H.A., Hassan, H.M., Ibrahim, O.M.O. and Assi, L.N. (2019), "Effect of micro rubber ash on the properties of self-compacting concrete", Int. J. Eng. Sci. Res. Technol., 8, 209-225. https://doi.org/10.5281/zenodo.3540376.   DOI
27 Official Website of MREPCS, Malaysian Rubber Cxport Promotion Council.
28 Saber, H. (2012), "Investigation of thermal performance of reflective insulations for different applications", Build. Environ., 52, 32-44. https://doi.org/10.1016/j.builden v.2011.12.010.   DOI
29 Pania, M., Xi, Y. and Li, Y. (2012), "Utilization of phase change materials and rubber particles to improve thermal and mechanical properties of mortar", Constr. Build. Mater., 28, 713-721. https://doi.org/10.1016/j.conbuildmat .2011.10.039.   DOI
30 Richardson, A., Heniegal, A. and Tindall, J. (2017), "Optimal performance characteristics of mortar incorporating phase change materials and silica fume", J. Green Build., 12, 59-79. https://doi.org/10.3992/1943-4618.12.2.59.   DOI
31 Sharkawi, A.E. (2015), "Performance of lightweight mortar made of locally available sustainable aggregate", 15th International Conference on Advances in Structural and Geotechnical Engineering, ICASGE, Hurghada, Egypt, 1-14.
32 Sofi, A. (2018), "Effect of waste tyre rubber on mechanical and durability properties of concrete-A review", Ain Shams Eng. J., 9, 2691-2700. https://doi.org/10.1016/j.asej.2017.08.007.   DOI
33 Tayfun, U. and Ilker, B.T. (2010), "The role of scrap rubber particles on the drying shrinkage and mechanical properties of self-consolidating mortars", Constr. Build. Mater., 24, 1141-1150. https://doi.org/10.1016/j.conbuildmat.2009.1 2.027.   DOI
34 Tarabieh, K. and Aboulmagd, A. (2019), "Thermal performance evaluation of common exterior residential wall types in Egypt", Build., 9, 1-15. https://doi.org/10.3390/buildings9040095.   DOI