• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.6
• /
• pp.53-60
• /
• 1994

The resonator using the shielded coplanar waveguide [S.C.P.W.] bounded by the rectangular waveguide is designed. The resonant frequency is obtained by using the full-wave analysis method. The fringing capacitances of the open-ended center strip in the resonator are obtained from the equivalent circuits by 3 different methods.

• Proceedings of the Korea Contents Association Conference
• /
• 2006.11a
• /
• pp.455-457
• /
• 2006

The mutual relations and equivalence between the boundary conditions for electromagnetic waves are discussed in terms of a waveguide step. In order to verify our approach, the reflection characteristics of a rectangular waveguide step are compared with respect to the boundary conditions. The characteristics of a rectangular waveguide step are analyzed with a mode-matching technique. In order to verify our approach, convergence behaviors and electromagnetic distributions are shown.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.6
• /
• pp.1244-1250
• /
• 1997

An arbitrary shaped iris in rectangular waveguideis investigated using FEM-CDMA with triangularprism elements in this paper. The volume of irisis subdivided into a relatively small number of triangular prism elements and FEM is used to formulate the field distribution. On the other hand, the fields in the waveguide region are represented by BIM derived from the waveguide Green's function and boundary conditions. The proposed method is verified through the design and experiment for the circular iris filter using WR-90 waveguide.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.5
• /
• pp.2120-2125
• /
• 2015

In this paper, a rectangular waveguide probe with a ridge-loaded straight slot (RLSS) is presented for a near-field scanning microwave microscope (NSMM). The RLSS is located laterally at the end wall of the cavity and is loaded on double ridges in a narrow straight slot to improve the spatial resolution compared with a straight slot. The probe consists of a rectangular cavity with an RLSS and a feed section of a WR-90 rectangular waveguide. When the proposed NSMM is located at distance of 0.1mm in front of a substrate without patches or strips, the simulated full width at half maximum (FWHM) of the probe improve by approximately 31.5 % compared with that of a straight slot without ridges. One dimensional scanning of the E-plane on a sample under test was conducted, and the reflection coefficient of the near-field scanning probe is presented.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.7 no.3
• /
• pp.246-253
• /
• 1996

In this paper, a problem that occurred in the telegraphist equation established by mode conversion method is solved as analysis tapered transmission line is applied to a waveguide taper. After comparing and analyzing the taper function with variant properties, we select on of taper functions not only that is easily designed but also that have good properties. And then we propose the applicant method to design the waveguide taper and deal with the design of mode transducer between rectangular waveguide and circular waveguide. The measured results of scattering coefficients for the mode transducer fabricated with designed data are agreed well with the theoretical results and the validity of the proposed design and analysis method has been confirmed.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.7 no.2
• /
• pp.167-177
• /
• 1996

The cutoff frequencies of a double ridged rectangular waveguide are calculated by applying the modal analysis to its cross-section. And the characteristic impedance of its $TE_{10}$ mode is evaluated in a frequency range of 6 to 18 GHz. When both ends of a linearly tapered rectangular wa- veguide consists of single and double ridged rectangular cross-sections, the equivalent nonuniform transmission line of its $TE_{10}$ mode is solved numerically. It is shown that the input impedance at its single ridged terminal becomes nearly constant in the wide bandwidth.

• ETRI Journal
• /
• v.21 no.2
• /
• pp.1-8
• /
• 1999

We analyze the characteristics of a coaxial-to-waveguide transition based on the finite difference time domain (FDTD) method with the cylindrical to rectangular cell interpolation scheme. The scheme presented in this paper is well suited for the analysis of a microwave device with a probe near waveguide discontinuity because perfect TEM mode can be generated inside the coaxial cable by using the cylindrical cell. The scattering parameters of a designed Ka-band transition are evaluated and compared with those of commercially available software, High Frequency Structure analysis Simulator (HFSS) and measured data. There exists good agreement between the measured and calculated data. In order to prove an accuracy of the interpolation scheme, a coaxial to waveguide transition with a disk-loaded probe is analyzed by the present approach and the results of this analysis are compared with measured data. Comparison shows that our results match very closely to those of measurement and other approaches. The method presented in this paper can be applied to analyze the characteristics of a probe excited cavity, coaxial waveguide T-Junctions, and so on.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.1
• /
• pp.68-74
• /
• 2008

The substrate integrated waveguide (SIW) structure can be approximated as the rectangular waveguide using common dielectric substrate with via-holes. To realize reflection-type resonator, $50-{\omega}$ microstrip line can be used for coupling with the center plane of the cavity. The oscillator is designed to operate at 9.45 GHz using the reflection-type SIW cavity resonator. The phase noise of oscillator shows -98.1dBc/Hz at 100 KHz offset. In experiment, the reflection type SIW cavity resonator improves the loaded quality factor making the low phase noise oscillator possible. Due to the entirely planar structure of this resonator, this technique can also be adequate in oscillator applications for a low cost and low phase noise performance.

• Journal of Energy Engineering
• /
• v.25 no.1
• /
• pp.86-91
• /
• 2016

Convenient design guideline for Waveguide-below-cutoff (WBC) array is proposed to obtain the minimum waveguide length for electromagnetic pulse (EMP) shielding. The analysis includes circular, rectangular, and hexagonal WBC, determine the total length of the waveguide. When the unit side of rectangular WBC and the diagonal line of hexagonal WBC are given as 30 mm, the length of hexagonal WBC is 5 mm shorter than rectangular case with shielding effectiveness (SE) 80 dB. The length difference is deepened with SE of 100 dB, which shows approximately 30 mm shorter length for hexagonal case than others. In addition, hexagonal WBC requires much shorter length than circular WBC. In conclusion, hexagonal case is the most effective with respect to flow velocity and pressure loss for equivalent SE.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.9
• /
• pp.912-918
• /
• 2011

In this paper, a composite right-/left-handed(CRLH) rectangular waveguide satisfying a balanced condition above the cut-off frequency is presented. The proposed structure consists of one shorted stub and two twisted H-plane irises which produce an effectively negative permeability and permittivity, respectively. The CRLH structure can independently control the series and shunt resonance frequencies of a CRLH transmission line which determine the left-handed(LH) and right-handed(RH) bands due to a minimized coupling between a shorted stub and twisted H-plane irises. Thus, the design of the CRLH waveguide satisfying a balanced condition is possible. To analyze the CRLH structure, a crossly connected equivalent circuit is derived. The simulated and measured results confirm that the proposed CRLH waveguide has a transmission property without a band gap among the LH and RH bands.