• 한국농공학회지
• /
• 제33권4호
• /
• pp.73-83
• /
• 1991

A numerical simulation of a 2-dimensional tidal flow in a shallow sea was performed using the frequency domain finite element method. In this study, to overcome the inherent problems of a time domain model which requires high eddy viscosity and small time steps to insure numerical stability, the harmonic function incorporated with the linearized function of governing equations was applied. Calculations were carried out using the developed tidal model(TIDE) in a rectangular channel of lOm(depth) X 4km (width) X 25km(length) under the condition of tidal waves entering the channel closed at one end for both with and without bottom friction damping. The predicted velocities and water levels at different points of the channel were in close agreement with less than 1 % error between the numerical and analytical solutions. The results showed that the characteristics of the tidal flow were greatly affected by the magnitude of tidal elevation forcing, and not by on surface friction, wind, or the linear bottom friction when the value was less than 0.01. For the optimum size of grid to obtain a consistent solution, the ratio between the length of the maximum grid and the tidal wave length should be less than 0.0018. It was concluded that the finite element tidal model(TIDE) developed in this study could handle the numerical simulation of tidal flows for more complex geometrical conditions.

• 한국방재학회 논문집
• /
• 제4권2호
• /
• pp.71-76
• /
• 2004

본 연구에서는 지진해일에 의한 원형섬 주변에서의 범람영역을 산정하기 위하여 사면구조(quadtree) 격자 기법을 이용한 수치모형을 개발하였다. 비선형 천수방정식을 지배방정식으로 사용하였으며, 적합화된 계층적사면구조 격자를 이용하여 leap-frog 기법으로 양해적으로 유한차분하였다. 원형섬 주위를 따라 적용된 사면구조 격자는 사각형 및 원형의 형상으로 세밀화 되었다. 본 모형에 의해 계산된 수치해석결과를 검증하기 위해 원형섬 주변의 처오름높이에 대한 수리실험결과와 비교하였으며, 본 연구의 결과는 수리실험결과와 양호하게 일치하였다.

• 전기학회논문지
• /
• 제66권11호
• /
• pp.1591-1599
• /
• 2017

In power electronics applications which switching frequency is below audible frequency, the acoustic noise and vibration design of magnetics are as important as the efficiency. In the case of the powder core, which is widely used in grid-connected inverters, many researches have been progressed in terms of efficiency. However, there are only few research have been progressed related with acoustic noise and vibrations. In this paper, the Sendust(Fe-Si-Al) powder core material which has low magnetostriction and low core loss is analyzed in terms of acoustic noise and vibration induced by Maxwell force and magnetostriction. Three building structures such as, rectangular, toroidal, and oval shape are designed for 4kW grid-connected inverter, because magnetic properties and the audible noises of the inductor are varied by magnetic core building structures. The effects of the Maxwell force and magnetostriction behaviors varied with core shapes are analyzed by finite element method and experiments. In addition, experiment results of the inductor efficiency are presented according to core building structures.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 봄 학술발표회 논문집
• /
• pp.627-634
• /
• 2002

To facilitate a drilling plan for grouting in fractured rock, an algorithm of practical use associated with a new term “fracture density distribution”or“fracture tomogram”is developed. It is well known that Televiewer data(amplitude and traveltime image) provide detailed information about not only dip and dip direction of each fracture but also its aperture size estimated by an appropriate evaluation algorithm. A selected plane section of medium around a borehole or the cross section between two boreholes is discretized into a two dimensional grid of cells(rectangular elements). As each elongated(straight) fracture passes through the cells, the corresponding aperture size value is successively summed up in each cell, depending on the fracture length segment. In this, the fracture lines can be determined by intersecting of each fracture plane with the selected plane section. If the fracture line does not pass through a particular grid element, the segment length is set to zero. The final value(aperture size value of each cell) derived from all the detected fractures constitutes the fracture density distribution of the selected plane section, Field examples are illustrated, which will prove the benefit of the suggested algorithm for several kinds of grouting works.

• 한국수자원학회논문집
• /
• 제41권11호
• /
• pp.1123-1133
• /
• 2008

유역의 강우-유출 현상을 분포형으로 모의하기 위해서는 삼각형 혹은 사각형 요소로 유역을 모형화하고 각 요소에서의 수문성분의 변화를 해석하여야 한다. 본 연구는 사각형 요소인 격자로 모형화된 유역에서의 강우-유출 현상을 1차원 운동파 방정식을 이용하여 모의할 때 각 격자에서 발생된 흐름의 추적을 위한 격자 네트워크 해석에 대해 수행하였다. 격자의 흐름방향은 D8-method(deterministic eight-neighbors method)에 의해 결정된 단방향 흐름정보를 이용하였고, 각 격자별 흐름방향과 흐름누적수 정보를 이용하여 해당 격자의 계산 순서를 결정하게 된다. 또한 1차원 운동파 방정식을 유한체적법으로 해석할 때 격자간의 흐름방향 형태에 따른 해석방법을 제시하고, 이를 격자별 유출량 계산에 적용하였다. 본 연구에서 제시된 격자 네트워크 해석법은 물리적 기반의 분포형 강우-유출 모형인 GRM(Grid based Rainfall-runoff Model)에 적용하였으며, 단순화된 가상의 유역에 대한 모의결과를 $Vflo^{TM}$ 모형의 모의결과와 비교함으로써 타당성을 검토하였다. 또한 한강 수계의 중랑천 유역의 적용을 통해 실유역에 대한 적용성을 검토하였다. 중랑천 유역의 적용결과 모의된 유출 수문곡선은 관측 수문곡선을 잘 재현하였으며, 이에 따라 격자 네트워크 해석 과정의 실유역 적용이 타당한 것으로 나타났다.

• Journal of Mechanical Science and Technology
• /
• 제15권4호
• /
• pp.465-472
• /
• 2001

A numerical study is carried out to clarify the characteristics of flow fields and breaking phenomena around a high speed catamaran hull advancing on calm water. Computations are carried out for Froude numbers between 0.2 and 1.0 and for ratios of the distance between hulls to the catamaran length varying between 0.2 and 0.5 for a mathematically defined Wigley hull. A Navier-Stokes solver which includes the nonlinearities of free surface conditions is employed. Computations are performed in a rectangular grid system based on the Marker & Cell method. For validation, present computation results are compared with existing experimental results. As an application, the results of the displacement catamaran are used for the breaking analysis.

• Journal of Ship and Ocean Technology
• /
• 제5권2호
• /
• pp.50-61
• /
• 2001

In this paper, nonlinear interactions between water waves and a horizontally submerged circular cylinder are numerically simulated. In this case, the nonlinear interactions between them generated a wave breaking phenomenon. The wave breaking phenomenon plays an important role in the wave farce. Negative drifting forces are raised at shallow submerged cylinders under waves because of the wave breaking phenomenon. For the numerical simulation, a finite difference method based on the unsteady incompressible Navier-Stokes equations and the continuity equation is adopted in the rectangular grid system. The free surface is simulated with a computational simulation method of two-layer flow by using marker density. The results are compared with some existing computational and experimental results.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2001년도 추계학술대회 논문집
• /
• pp.202-206
• /
• 2001

A three dimensional incompressible Navier-Stokes code based on the third derivative upwind is employed to simulate the flow around the underwater vehicle advancing on the calm water. Computations are carried out in the range of Froude numbers 0.4 to 0.7. The wave resistance, lift, moment and the pressure distribution on the body are calculated. Computations are performed in a rectangular grid system based on the Marker & Cell method. For validation, computation results are compared with existing experimental results.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2003년도 추계학술대회 논문집
• /
• pp.198-203
• /
• 2003

Unsteady two-dimensional nonlinear waves which are generated by the numerical wavemaker of plunging type are numerically simulated using a finite difference method in rectangular grid system. Two-dimensional Navier-Stokes equations and the continuity equation are used for the computations. Irregular leg lengths and stars are employed near the boundaries of body and free surface to satisfy the boundary conditions. Marker-density function method is adopted for the simulation of wave breaking phenomena, and the computations are carried out with various wave amplitudes and two section shapes of wavemaker. The computation results are compared with other existing computational and experimental results, and the agreement between the experimental data and the computation results is good.

• 한국정보통신학회논문지
• /
• 제2권4호
• /
• pp.653-660
• /
• 1998

본 연구는 시간영역 유한 차분법(finite difference-time domain method:FDTD)을 이용하여 마이크로스트립 배열 안테나의 전자계 특성들을 해석한다. 직각좌표계에서 맥스웰 방정식의 유한차분 방정식을 정의하였으며, 자유공간과 같은 무한영역해석을 위해서 Mur의 흡수경계조건을 이용하였다 마이크로스트립 배열 안테나를 단위격자 구조로 모델링한 후 시간영역에서 필드분포를 도시하였다.