• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 춘계학술대회 논문집
• /
• pp.152-157
• /
• 2009

Titanium alloy sheets have excellent specific strength and corrosion resistance as well as good performance at high temperature. Recently, titanium alloys are widely employed not only aerospace parts but also bio prothesis and motorcycle. But the database is insufficient of the titanium alloy for press forming process. In this study, the effect of temperature on the forming limit diagram was investigated for Ti-6Al-4V titanium alloy sheet through the Hocker's punch stretching test at elevated temperature. Experimental results obtained in this study can provide a database for development of press forming process at elevated temperature of Ti-6Al-4V titanium alloy sheet. From the experimental studies it can be concluded that the formability of Ti-6Al-4V titanium alloy sheet is governed by the ductile failure for the testing temperature below and vice versa neck-induced failure above the recrystalization temperature $0.5T_m$. The formability of Ti-6Al-4V titanium alloy sheet at $750^{\circ}C$ increases about 7 times compared with that at room temperature.

• Journal of Pharmaceutical Investigation
• /
• 제27권3호
• /
• pp.199-205
• /
• 1997

In order to formulate biphenyl dimethyl dicarboxylate(DDB) aqueous solutions, the effects of various solubilizing agents such as cosolvents(PG, PEG 400, glycerin, ethanol), surfactants,$(poloxamer\;407,\;Cremophor^{\circledR}\; RH40,\;Solutol^{\circledR},\;Tween\;80,\;sodium\;lauryl\;sulfate)$, complexation agent$(CELDEX^{\circledR}\;CH-20)$ and others(urea, niacinamide, propylene carbonate, HPMC) on the solubility of DDB in water were evaluated. The solubility of DDB in water was about $0.21\;{\mu}g/ml\;at\;20^{\circ}C$, while its solubility in PEG 400 was 5,000 times higher than that in water. 60% PEG 400 aqueous solution was selected as an optimum solvent system, and surfactants or other solubilizing agents were added to prevent DDB from recrystalization. The addition of surfactants in water increased the solubility of DDB from 15- to 34-fold, however, $CELDEX^{\circledR}\;CH-20$ and other agents studied showed negligible effects on the solubility of DDB in water. The 60% PEG 400 aqueous solution containing 5% $Cremophor^{\circledR}$　RH40 was appeared as the formula of choice. It showed acceptable physical stability after stored for 7 days at $4^{\circ}C$.

• The International Journal of Costume Culture
• /
• 제4권2호
• /
• pp.86-93
• /
• 2001

Agricultural drainage salt generated during irrigation of crops in San Joaquin Valley, California exceeds 600,000 tons annually and cumulates in the field in a rapid rate. As a result, the waste is taking out more farmlands for salt storage and disposal, imposing serious concerns to environment and local agricultural industry. in searching for a potential solution to reduce or eliminate the waste, this research explored feasibility of producing a value-added product, sodium sulfate, from the waste and utilizing the product in textile dyeing. The result indicated that sodium sulfate could be produced the salt and could be purified by a recrystalization method in a temperature range within the highest and lowest daily temperatures in summer in the valley. Re recovered sodium sulfate samples, with purifies ranging from 67% to 99.91, were compard with commercially available sodium sulfate in directive dyeing of cotton fabrics. Direct Yellow 27 and direct Blue 1 had similar exhaustions among Na₂So₄Ⅰ, Na₂So₄Ⅱ, Na₂So₄Ⅲ and V which had similar ratios of sodium sulfate and sodium chloride in recovered salts. Na₂So₄Ⅳ had high exhaustion despite low ratios of sodium sulfate and sodium chloride. In direct Red 80, exhaustion depends more on the ratios of sodium sulfate and sodium chloride than sodium chloride. Na₂SO₄Ⅳ and Na₂SO₄V with high ratios of sodium chloride had more exhaustion than Na₂So₄and Na₂So₄Ⅲ with low ratios of sodium chloride. Generally, directive dyeing using recovered salts from farm drainage has similar or more excellent exhaustion than directive dyeing using commercial sodium sulfate.

• Biomolecules & Therapeutics
• /
• 제7권4호
• /
• pp.362-370
• /
• 1999

Propolis, a natural resinous compound collected from honey bees, contains many biochemical constituents(wax, flavonoids, phenolic compounds, etc.) and has been used in traditional medicines as early as 300 B.C. It was been demonstrated that ethanol, acetylsalicylic acid, ischemia reperfusion, non-steroidal antiin-flammatory drugs and stress induce gastric lesions by promoting the generation of reactive oxygen metabolites. Therefore, some drugs that are capable of scavenging or inhibiting the generation of reactive oxygen radicals might be expected to prevent the gastric mucosal injury. The aim of this study was 1) to examine the antiulcer effect of propolis, 2) to investigate the mechanism of action by determining gastric acid secretion, lipid per-oxidation, mucus content and proton pump ($H^+$/$K^+$-ATPase) activity on gastric mucus in varios experimental models, and finally, 3) to isolate and identify the pure compounds that exert antiulcer activity. Step 2-1 and 2-3 sub-sub fraction shoed a significant reduction of severity of gastirc damage at the dose of 25 mg/kg in various experimental models. We isolated 4 sub-sub-sub fractions by flash column chromatography of Step 2-1 sub-sub fraction and one sub-sub-sub fraction by recrystalization of Step 2-3 sub-sub fraction. The protective effects of propolis sub-sub-sub fraction manifested sifnificant effects in HCl-ethanol induced gastric erosion model and aspirin induced gastric ulcer model. These results showed that the gastric mucosal protective effect of propolis might result from the increase of mucus secretion, free radical scavenging effect as well as the reduction of acid secretion in accordance with the reduction of $H^+$/$K^+$-ATPase activitv. Three compounds were isolated and identified from sub-sub fraction of propolis which showed antiulcer effects. Subsequently, these compounds were identified as a flavonoid, namely, 2-acetoxy-5,7,-dihydroxy-flavanone, galangin and chrysin.

• Applied Biological Chemistry
• /
• 제46권1호
• /
• pp.55-59
• /
• 2003

쑥갓(Chrysanthemum coronarium L.) 잎으로부터 생리활성 성분을 가진 3풀의 화합물을 분리하여 다양한 spectral data를 종합한 결과, 화합물 1, 2, 3은 terpenoid의 일종인 monoterpene lactone, sesequiterpene lactone과 sterol 화합물인 것으로 밝혀졌으며, 이들은 각각 dihydrotulipinolide, loliolide, $5{\alpha},8{\alpha}-peroxyergosterol$로 동정되었다. 이 화합물들은 쑥갓에서 처음으로 분리-보고되는 화합물이다. 분리된 화합물들의 세포독성을 측정한 결과, 화합물 3은 3종의 인체암 세포주에 대하여 비교적 강한 활성을 나타내었다.

• 복식문화연구
• /
• 제11권3호
• /
• pp.416-422
• /
• 2003

Agricultural drainage salt generated during irrigation of crops in San Joaquin Valley, California, exceeds 600,000 tons annually and cumulates in the field in a rapid rate. As a result, the waste is taking out more farmlands for salt storage and disposal, imposing serious concerns to environment and local agricultural industry. In searching for a potential solution to reduce or eliminate the waste, this research explored feasibility of producing a value-added product, sodium sulfate, from the waste and utilizing the product in textile dyeing. The results indicated that sodium sulfate could be produced from the salt and could be purified by a recrystalization method in a temperature range within the highest and lowest daily temperatures in summer in the valley. The recovered sodium sulfate samples, with purities ranging from 67% to 99.91, were compared with commercially available sodium sulfate in the dyeing of levelling dyes with nylon/wool fabrics. In nylon/wool fabrics, C.I. Acid Yellow 23 had similar exhaustions among Na₂SO₄ I, Na₂SO₄ II, Na₂SO₄ III and Na₂SO₄ Ⅴ which had similar ratios of sodium sulfate and sodium chloride in recovered salts. Na₂SO₄ Ⅳ had low exhaustion which had low ratios of sodium sulfate and sodium chloride. In nylon/wool fabrics, C.I. Acid Blue 158 had similar exhaustions among Na₂SO₄ I, Na₂SO₄ II, Na2₂SO₄ III, Na₂SO₄ IV and Na₂SO₄ Ⅴ despite of Na₂SO₄ Ⅳ had low ratios of sodium sulfate and sodium chloride Generally, the dyeing of levelling dyes using recovered salts from farm drainage has similar or low exhaustion than the dyeing of levelling dyes using commercial sodium sulfate.

• 대한핵의학회지
• /
• 제24권2호
• /
• pp.215-221
• /
• 1990

HM-PAO was synthesized by two step reaction. d, 1-HM-PAO was separated from the racemic product by fractional recrystalization in ethylacetate, and the chemical structure and purity was confirmed by proton NMR spectroscopy. The synthesized 0, 1-HM-PAO was labeled with $^{99m}Tc$ and studied the biodistribution in mice. From the results we could find that liver uptake of synthesized $^{99m}Tc$ d, 1-HM-PAO was higher than that of Amersham kit, but no conspicuous difference was found in brain and other tissues (blood, lung, stomach, intestine, muscle, spleen and kidney).

• 한국표면공학회지
• /
• 제36권4호
• /
• pp.296-300
• /
• 2003

Extended cylindrical magnetron sputtering system with rotating 600-mm long and 90-mm diameter graphite cathode and pulsed power supply voltage generator were developed and fabricated. Time-dependent Langmuir probe characteristics as well as carbon films thickness were measured. It was shown that ratio of ions flux to carbon atoms flux for pulsed magnetron discharge mode was equal to $\Phi_{i}$ $\Phi$sub C/ = 0.2. It did not depend on the discharge current in the range of $I_{d}$ / = 10∼60 A since both the plasma density and the film deposition rate were found approximately proportional to the discharge current. In spite of this fact carbon film structure was found to be strongly dependent on the discharge current. Grain size increased from 100 nm at $I_{d}$ = 10∼20 A to 500 nm at $I_{d}$ = 40∼60 A. To deposit fine-grained hard nanocrystalline or amorphous carbon coating current regime with $I_{d}$ = 20 A was chosen. Pulsed negative bias voltage ($\tau$= 40 ${\mu}\textrm{s}$, $U_{b}$ = 0∼10 ㎸) synchronized with magnetron discharge pulses was applied to a substrate and voltage of $U_{b}$ = 3.4 ㎸ was shown to be optimum for a hard carbon film deposition. Lower voltages were not sufficient for amorphization of a growing graphite film, while higher voltages led to excessive ion bombardment and effects of recrystalization and graphitization.

• 한국세라믹학회지
• /
• 제34권2호
• /
• pp.163-170
• /
• 1997

대표적인 무기계 지연제인 규불하마그네슘(MgSiF6.6H2O)을 시멘트 수화반응시 첨가했을 때의 수화반응의 지연 효과 및 특성과 수용액 이온농도 변화 고찰하기 위하여 규불화마그네슘을 시멘트 질랴의 0.3wt%에서 5wt%까지 변화시키면서 그 영향을 연구 검토하였다. 시멘트 모르타르의 flow는 지연제의 첨가에 따라 감소하는 경향이 있으며 응결 시간은 지연제의 첨가량에 따라 지연되었다. 모르타르의 압축 강도는 지연제의 첨가량에 따라 3일, 7일까지는 지연제를 첨가하지 않은 plain mortar에 비하여 약간 낮은 강도를 나타내나, 시간이 지남에 따라 회복되어 28일이 지나면 plain 모르타르와 같은 강도를 나타낸다. 규불화마그네슘이 첨가되면 수화 초기 단계에서 시멘트로부터 용출된 알카리 이온과 반응하여 K2SiF6의 생성이 일어나며 그와 동시에 Ca++와 F++와의 반응에 따라 CaF2화합물이 생성됨을 확인하였다. 이때 생성된 K2SiF6 및 CaF2생성물의 비표면적은 대단히 컸으며 이들 물질이 수화반응 초기에 미수화 시멘트시 입자 표면에 생성되어 시멘트의 수화가 지연되는 것으로 검토된다. 또한 수화초기의 수화용액의 Ca++ 및 K+이온 농도의 저하 역시 포틀랜드 수화반응속도를 지연시켜 주는 이유가된다.

• Restorative Dentistry and Endodontics
• /
• 제22권1호
• /
• pp.479-489
• /
• 1997

The purpose of this study was to evaluate the effect of the Nd : YAG laser on the tooth hypersensitivity by the observation of the morphological changes of the dentinal surface irradiated with Nd : YAG laser by use of SEM. In 40 mandibular and maxillary molars without any carious lesion or restoration, severe attrition and abrasion, Enamel was removed with fine grit diamond bur and exposed dentinal surfaces were polished with Soflex discs. In control group (10 teeth), exposed dentinal surfaces were acid-etched with 10 % Maleic acid for 15 seconds. In the experimental group 1 (10 teeth), acid-etched dentinal surfaces with 10% Maleic acid were prepared by Nd : YAG laser (6 watts power, 1 psi water, 18 psi air) for 2 minutes. In the experimental group 2 (10 teeth), exposed dentinal surfaces were irradiated with Nd: YAG laser (10 watts power, 3 psi water, 10 psi air) until the painted black stains on the dentinal surfaces were completely removed. In the experimental group 3 (10 teeth). dentinal surfaces were prepared with Nd : YAG laser (6 watts power, 1 psi water, 18 psi air) until the painted black stanins on them were completely removed and then the irradiated dentinal surfaces were acid-etched with 10 % Maleic acid for 15 seconds. The specimens were routinely processed and observed with scanning electron microscope. The results were as follows : 1. In the irradiated dentinal surfaces, the characteristics of the melting and recrystalization on the dentinal surfaces were observed. Compared with the results in the control group, we could observe that in the irradiated dentinal surfaces, the aperture of the dentinal tubules were reduced and there were more debris obstructing the dentinal tubules. 2. In the irradiated dentinal surfaces, crater structures were commonly present and in the crater bottoms, there were a lot of bead like melted dentin structures, which had the ruptured opening in the center of them. 3. The melted dentins and cracks in the smear layer were less frequently observed in the irradiated dentinal surfaces using copious cooling water than in the irradiated dentinal surfaces using scare cooling water.