• Journal of Institute of Convergence Technology
• /
• v.1 no.1
• /
• pp.13-17
• /
• 2011

The car industry is one of the technological applications which more rare earth metals employes as three-way catalysts. Therefore, the recovery of rare earth metals from the used automotive three-way catalysts could be important source to obtain these metals. This work presents the analysis of market and demand for rare earth metal in automotive three-way catalyst and introduces the dry and the wet processes for the recovery of rare earth metals from used three-way catalyst. Finally, the alternative methods to conventional wet processes was simply suggested based on the economic and ecological point of view.

• Transactions of the Korean hydrogen and new energy society
• /
• v.17 no.1
• /
• pp.8-20
• /
• 2006

For large scale separation hydrogen from different mixing ratio(60/40 and 80/20 vol.%) of hydrogen and methane $1Nm^3/hr$ and $4Nm^3/hr$ 2bed-6step pressure swing adsorption(PSA) process was used, respectively. The effects of the feed gas pressure, adsorption time, the feed flow rate and the P/F(purge to feed) ratio on the process performance were evaluated. In the $1Nm^3/hr$ PSA results, 11 atm adsorption pressure and 0.10 P/F ratio might be optimal values to obtain more than 75 % recovery and 99 % purity hydrogen in these processing. The optimum feed flowrate was 22 LPM and 17 LPM in the ratio 60/40 and 80/20, respectively. In the $4Nm^3/hr$ PSA results, 10 atm adsorption pressure might be simulated values to obtain more than 80 % recovery and 99 % purity hydrogen in these processing.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.11 no.4
• /
• pp.313-318
• /
• 2006

A two-stage process of nanofiltration and water-splitting electrodialysis was investigated for lactic acid recovery from fermentation broth. In this process, sodium lactate is isolated from fermentation broth in the first stage of nanofiltration by using an NTR-729HF membrane, and then is converted to lactic acid in the second stage by water-splitting electrodialysis. To determine the optimal operating conditions for nanofiltration, the effects of pressure, lactate concentration, pH, and known added impurities were studied. Lactate rejection was less than 5%, magnesium rejection approximated 45%, and calcium rejection was at 40%. In subsequent water-splitting electrodialysis, both the sodium lactate conversion to lactic acid and sodium hydroxide recovery, were about 95%, with a power requirement of $0.9{\sim}1.0\; kWh$ per kg of lactate.

• Journal of Microbiology and Biotechnology
• /
• v.25 no.11
• /
• pp.1936-1943
• /
• 2015

The present study developed an efficient and environmentally friendly method for recovering polyhydroxybutyrate (PHB) from Cupriavidus necator. Several non-halogenated solvents were tested and it was found that butyl acetate and ethyl acetate are powerful solvents for the biopolymer. Testing was performed to examine the effects of temperature (25℃ until temperature below solvent boiling points) and heating incubation time (0-60 min) on the two solvents. Butyl acetate had a higher recovery level (96%) and product purity (up to 99%) than ethyl acetate at 103℃ and a heating incubation time of 30 min. Under these conditions, PHB recorded the highest molecular weight of 1.4 × 10⁶ compared with the standard procedure (i.e., recovery using chloroform). The proposed strategy showed that butyl acetate is a good alternative to halogenated solvents such as chloroform for recovery of PHB.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.17 no.4
• /
• pp.568-576
• /
• 2017

This paper presents a clock and data recovery circuit with an adaptive loop bandwidth calibration scheme and the idle power saved frequency acquisition. The loop bandwidth calibration adaptively controls injection currents of the main loop with a trimmable bandgap reference circuit and trains the VCO to operate in the linear frequency control range. For stand-by power reduction of the phase detector, a clock gating circuit blocks 8-phase clock signals from the VCO and cuts off the current paths of current mode D-flip flops and latches during the frequency acquisition. 77.96% reduction has been accomplished in idle power consumption of the phase detector. In the jitter experiment, the proposed scheme reduces the jitter tolerance variation from 0.45-UI to 0.2-UI at 1-MHz as compared with the conventional circuit.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.2
• /
• pp.800-811
• /
• 2018

This paper presents a regenerative braking control scheme for Switched Reluctance Machine (SRM) drive in Electric Vehicles (EVs). The main purpose is to maximize the recovered energy during battery charging by taking into account the nonlinear physical characteristics of the Switched Reluctance Machine. The proposed regenerative braking method employs the back-EMF in the generation process as a complicated position-dependent voltage source. The proposed maximum power recovery (MPR) operation of the regenerative braking is first based on the maximization of the extracted power from the machine and then the maximization of the power transferred to the battery. The maximum power extraction (MPE) from SRM is based on maximizing the energy conversion ratio by the calculation of the optimum PWM switching duty cycle, turn-on, and turn-off angles. By using the impedance matching theorem that allows the maximum power transfer (MPT) of the MPE, the proposed MPR is achieved. The parametric averaged value modeling of the machine phase currents in the chopping control mode is used for MPR realization. By following this model, a nonlinear equivalent input resistance is derived for the battery internal resistance matching. The effectiveness of the proposed regenerative braking method is demonstrated through simulation results and experimental implementation.

• Journal of the Semiconductor & Display Technology
• /
• v.12 no.2
• /
• pp.27-32
• /
• 2013

Shape From Focus (SFF) is a passive optical technique to recover 3D structure of an object that utilizes focus information from 2D images of the object taken at different focus levels. Mostly, SFF methods use a single focus measure to compute image focus quality of each pixel in the image sequence. However, it is difficult to recover accurate 3D shape using a single focus measure, as different focus measures perform differently in diverse conditions. In this paper, a nonlinear Total Variation (TV) based approach is proposed for 3D shape recovery. To improve the result of surface reconstruction, several initial depth maps are obtained using different focus measures and the resultant 3D shape is obtained by diffusing them through TV. The proposed method is tested and evaluated by using image sequences of synthetic and real objects. The results and comparative analysis demonstrate the effectiveness of our method.

• Journal of Radiation Industry
• /
• v.10 no.4
• /
• pp.243-248
• /
• 2016

Argonaute 2 (AtAGO2) is a well characterized effector protein in Arabidopsis for its functionalities associated with DNA double-strand break (DSB)-induced small RNAs (diRNAs) and for its inducible expression upon ${\gamma}$-irradiation. However, its transcriptional regulation depending on the recovery time after the irradiation and on the specific response to DSBs has been poorly understood. We analyzed the 1,313 bp promoter sequence of the AtAGO2 gene ($1.3kb_{pro}$) to characterize the transcriptional regulation of AtAGO2 at various recovery times after ${\gamma}$-irradiation. A stable transformant harboring $1.3kb_{pro}$ fused with GUS gene showed that the AtAGO2 is highly expressed in response to ${\gamma}$-irradiation, after which the expression of the gene is gradually decreased until 5 days of DNA damage recovery. We also confirm that the AtAGO2 expression patterns are similar to that of ${\gamma}$-irradiation after the treatments of radiomimetic genotoxins (bleomycin and zeocin). However, methyl methanesulfonate and mitomycin C, which are associated with the inhibition of DNA replication, do not induce the expression of the AtAGO2, suggesting that the expression of the AtAGO2 is closely related with DNA DSBs rather than DNA replication.

• Journal of Industrial and Engineering Chemistry
• /
• v.68
• /
• pp.48-56
• /
• 2018

A potassium copper hexacyanoferrate (KCuHCF) embedded magnetic hydrogel bead (HCF-Mbead) was synthesized via a facile double crosslinking methods of $Fe^{3+}$ ionic binding and freeze-thaw for effective $Cs^+$ removal. The HCF-Mbead had a hierarchical porous structure facilitating fast access of $Cs^+$ ions to embedded active sites. The adsorbent showed enhanced $Cs^+$ removal properties in terms of capacity (69.2 mg/g), selectivity ($K_d=4{\times}10^4mL/g$, 1 ppm $Cs^+$ in seawater) and stability (>99.5% removal in pH 3~11) with rapid magnetic separation. This study further opens the possibility to develop an efficient material that links the integration of adsorption and recovery.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.102.2-102.2
• /
• 2010

We are to evaluate the stabilization technology of actual biogas plant facilities, which is operating currently. It describes the traits of the consistent facilities of mesophilic anaerobic digestion using Unison Biogas plant Recovery system(UBR). Also the economical efficiency is examined with the electric power sales earnings and applying the deserted heating by generating electric power, which is generated by operated combined heat and power using biogas produced by mesophilic anaerobic digestion. We have generated the 481,113kw for electric power and 1,376Gcal for thermal energy simultaneously. If these electric power and thermal energy are converted into diesel, we can achieve savings equal to 114,300L, and 152,109L in the quantity of heat. Finally, if CDM, RPS, liquid fertilizer sales business, etc. is activated, the earnings will be expected to improve dramatically and is considered to contribute a drop of the greenhouse gas.