• Journal of Korean Neurosurgical Society
• /
• 제30권4호
• /
• pp.501-508
• /
• 2001

Objectives : Hemifacial spasm is painless uncommon disorder characterized by involuntary paroxysmal movement on one side of face. It is known that hemifacial spasm is mainly due to pulsatile compression by vessels at the root exit zone(REZ) of the facial nerve. Microvascular decompression at REZ of the facial nerve has become the standard treatment modality for hemifacial spasm. The authors have analized patients with hemifacial spasm treated with microvascular decompression to evaluate operation result and clinical course after operation. Patients and Methods : From 1992 to 1999, 41 patients with hemifacial spasm underwent this operation. Retrospective analysis of operation results and clinical recovery patterns was done. The length of observation had been more than 6 months in all cases. Results : The ratio of male to female was 1:1.4, and age at operation ranged from 24 to 66 years. Their mean age was 47.6 years and the mean preoperative duration of symptoms was 7.2 years. Most common offending vessels were AICA in 18 cases(48%) and second most common were PICA in 13 cases(31.7%). The rest of them were 3 case in vertebral artery, and 7 cases(13%) in multiple offending vessels. Patterns of improvement after surgery could be divided into 4 clinical types. There was complete recovery in 3 days after operation in 24 cases(58.6%, Immediate complete recovery). There was complete recovery in 3 days after operation, and symptom was recurred partially, which was gradually subsided in 2 weeks after operation in 4 cases(9.8%, Delayed complete recovery type I). There was partial recovery after operation and symptom was compretely disappeared gradually in 6 months after operation in 7 cases(17.1%, Delayed complete recovery type II). Finally, there was partial recovery after operation, and symptom was somewhat remained after 6 months later(14.5%, Delayed partial recovery). Conclusion : In conclusion, microvascular decompression for hemifacial spasm is a safe and reliable treatment modality with good results of improvement and there are 4 recovery patterns in clinical course after operation in our series. Therefore, follow-up observation after microvascular decompression is necessary to evaluate the operative results and complication, especially in the delayed resolved cases.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• 제57권3호
• /
• pp.280-285
• /
• 2012

This study was conducted to establish proper milling condition and harvesting time for improving the milling recovery of head foxtail millet grain. Brown foxtail millet recovery and the percentage of head foxtail millet recovery were significantly different according to the number of hulling and milling time. Also, the interaction of these factors had influence on brown foxtail millet recovery and the percentage of head foxtail millet recovery. To improve the percentage of head foxtail millet recovery, it was effective to hull grain twice and mill for 1.30 minute. 1000-grain weight of brown foxtail millet, brown foxtail millet recovery, hardness of brown foxtail millet, milling recovery, and the percentage of milling recovery of head foxtail millet grain were significantly different according to harvesting day after heading. For improving the ratio of ripened grain and the percentage of recovery of head foxtail millet, it is recommended to harvest 45 days (accumulated temperature : $1,148^{\circ}C$) after heading (DAH) in early maturing Hwangkeumjo, 50 DAH (accumulated temperature : $1,150^{\circ}C$) in mid-late maturing Samdamae and Kyeongkwan1, and 55 DAH (accumulated temperature : $1,168^{\circ}C$) in late maturing Samdachal.

• Advanced Composite Materials
• /
• 제18권4호
• /
• pp.315-326
• /
• 2009

PCC (precipitated calcium carbonate) and ground calcium carbonate have been widely used in alkaline papermaking. Unfortunately, although increasing filler level in papers can improve the paper properties such as brightness, opacity, stiffness gloss, smoothness, porosity, and printability, as well as decrease cost, some strength of the paper is negatively affected. In this research, needle-like aragonite was synthesized using $Ca(OH)_2$ and $CO_2$ as reactants in the presence of $MgCl_2$ and characterized with scanning electronic microscopy (SEM) and X-ray diffraction (XRD). The physical and optical properties of the paper handsheets containing these needle-like aragonite fillers were evaluated. Results indicated that tensile strength, Z-direction tensile strength and folding endurance of the paper were improved by the needle-like aragonite crystals compared to the paper using commercial PCC (precipitated calcium carbonate) as filler. The stiffness of the paper handsheet on the machine direction was increased, but no evident difference in the cross direction was found. The improvement of paper strength mainly resulted from the twining effect between the aragonite whiskers and paper fibers. The optical properties of the paper were slightly decreased with the use of the needle-like aragonites compared to commercial PCC. These results suggest that paper cost can be decreased by increasing the content of needle-like aragonite filler while paper strength will not be decreased compared to PCC filler.

• Environmental Engineering Research
• /
• 제25권2호
• /
• pp.222-229
• /
• 2020

Membrane assisted condenser is an innovative membrane operation that exploits the hydrophobic nature of microporous membranes to promote water vapor condensation and recovery. It can be used for water and chemicals recovery from waste gaseous streams. In this work, the testing of membrane condenser for water and ammonia recovery from synthetic streams (i.e., a saturated air stream with ammonia) simulating the plume of cooling tower is illustrated. The modeling of the process was carried out for predicting the membrane-based process performance and for identifying the minimum operating conditions for effectively recovering liquid water. The experimental data were compared with the results achieved through the simulations showing good agreement and confirming the validity of the model. It was found that the recovery of water can be increased growing the temperature difference between the plume and the membrane module (DT), the relative humidity of the plume (RH^plume) and the feed flow rate on membrane area ratio. Moreover, the concentration of NH₃ in the recovered liquid water increased with the growing DT, at increasing NH₃ concentration in the fed gaseous stream and at growing relative humidity of the feed.

• Resources Recycling
• /
• 제24권3호
• /
• pp.27-33
• /
• 2015

EAFD (Electric Arc Furnace Dust) is considered as pernicious pollutant, assigned hazardous waste. Since this dust is a by-product of industry, it contains valuable metals such as Fe, Zn, Ni, Cu which can be turned into resources by recycling process. In this study, hydrometallurgical process was applied to recover Zn from Electric Arc Furnace Dusts. The result showed 95% Zn recovery at 3M $H_2SO_4$, Solids/Liquid ratio 1:2 and aeration of 1.8L/min for 2hr. However there was 80% Zn recovery at lower $H_2SO_4$ concentration apply for pilot scale plant.

• Proceedings of the Korea Concrete Institute Conference
• /
• 한국콘크리트학회 2002년도 가을 학술발표회 논문집
• /
• pp.233-238
• /
• 2002

In this paper, the characteristics of fresh and hardened recycled concrete were experimentally compared to investigate the applicability of the recycled fine aggregates with the substitution ratio. Test results show that the workability of the recycled concrete decreases with the increment of substitution ratio of the recycled fine aggregates except for type-D case which has a lower absorption ratio. Also air content was increased with increasing substitution ratio. It was found that the compressive strength and elastic modulus of recycled concrete were decreased with increasing substitution ratio of the recycled fine aggregates. And, the superplasticizer was more effective on the workability recovery of the recycled concrete.

• Membrane Journal
• /
• 제23권1호
• /
• pp.1-11
• /
• 2013

Poly(ether imide) (PEI)-poly(dimethylsioxane) (PDMS) composite membranes and their modules were prepared, which are capable of selective $CO_2$ separation from the mixture gas. The gas flow rate, concentration, recovery ratio of $H_2$ and removal ratio of $CO_2$ outflowing by stage-cut were characterized at $25^{\circ}C$ and the constant pressure. In addition, to increase the recovery ratio of $H_2$, one stage, two stage series connection, and three stages series + parallel connection tests were carried out. When the stage-cut was 0.32 for the three stages connection operation, the concentration $H_2$ of the produced gas and the recovery ratio of $H_2$ was 97% and 85%, respectively. And also the removal ratio of $CO_2$ was 90% was obtained and the recycled gas concentration was similar with that of the feed gases.

• The Korean Journal of Nuclear Medicine Technology
• /
• 제15권1호
• /
• pp.10-16
• /
• 2011

Purpose: The partial volume effect occurs because of limit of the spatial resolution. It makes partial loss of intensity and causes SUV to be lower than it should actually be. So the purpose of this study is to calculate recovery coefficient for correcting PVE from phantom study and to compare before and after SUV correction applying to PET/CT examination. Materials and Methods: The flangeless Esser PET phantom consisting of four hot cylinders was used for this study. All of the hot cylinders were filled with FDG solution of 20.72 MBq per 1000 ml, and the phantom background was filled with FDG solution of different concentrations (33.30, 22.20, 16.65 MBq per 6440 ml) to yield H/B ratios of around 4:1, 6:1 and 8:1. Using the Biograph Truepoint 40(SIEMENS, Germany), we applied recovery coefficient method to 30 patients who were diagnosed with lung cancer after PET/CT exam. And then we analyzed and compared SUV before and after correcting partial volume effect. Results: The smaller the diameter of hot cylinder becomes, the more recovery coefficient decreased. When we applied recovery coefficient to clinical patients and compared SUV before and after correcting PVE, before the correction all lesions gave an average max SUV of 7.83. And after the correction, the average max SUV increases to 10.31. The differences in the max SUV between before and after correction were analyzed by paired t test. As a result, there were statistically significant differences (t=7.21, p=0.000). Conclusion: The SUV for quantification should be measured precisely to give consistent information of tumor uptake. But PVE is one of factors that causes SUV to be lower and to be underestimated. We can correct this PVE and calculate corrected SUV using the recovery coefficient from phantom study. And if we apply this correction method to clinical patients, we can finally assess and provide quantitative analysis more accurately.

• Resources Recycling
• /
• 제18권4호
• /
• pp.62-69
• /
• 2009

We researched separation of mixed waste acids with HF, $CH_3COOH$, $HNO_3$ that were produced during a semiconductor wafer process to recycle these acids. At first, we manufactured the fluoride compound in form of $Na_2SiF_6$ by precipitating HF using $NaNO_3$ and Si powder. The concentration of HF was reduced from the initial concentration of 127 g/L to 0.5 g/L with an HF recovery ratio of 99.5%. After the manufacture of $Na_2SiF_6$, the concentration of $HNO_3$ and $CH_3COOH$ demonstrated 502 g/L and 117 g/L respectively. Following these findings we added NaOH in this $CH_3COOH/HNO_3$ mixed acid in order to obtain pH=4. Next we separated the $CH_3COOH$ and recoverd it through the use of vaccum evaporation at -440 mmHg, $95^{\circ}C$. The concentration of the recovered $CH_3COOH$ was approximately 15% and the recovery ratio of $CH_3COOH$ was over 85%. We precipitated the $NaNO_3$ by cooling the concentrated solution to $20^{\circ}C$ with a $HNO_3$ recovery ratio of over 93%. We confirmed that only $Na_2SiF_6$ and $NaNO_3$ were manufactured by XRD analysis after drying these precipitants at $90^{\circ}C$. The precipitants demonstrated a purity of approximately 97% and 98% respectively. Therefore, the purity of the precipitants proved to be similar to that of commercial products.

• Journal of Korean Society of Transportation
• /
• 제25권1호
• /
• pp.37-47
• /
• 2007

The Integrated Public Transport Reforms of the Seoul Metropolitan Government, which were implemented on the $1^{st}$ of July. 2004, launched a new fare allocation method. However, when a Private transit operator or a new transport system is introduced into the existing system, it will cause an allocation problem. Therefore, this study aims to Propose a rational fare allocation method which can be applicable regardless of the number of Public transportation modes or operators. To create alternatives, this study has adopted a fundamental principle of revenue allocation methods for the transit or communications sectors, and has applied it to the current transit system of Seoul. This study kas analyzed results of the cost recovery ratios and characteristics of each alternative through case studies. This study kas Presented an assessment criterion Z in order to select an optimal alternative. The criterion consists of the sum of the cost recovery ratio of each operator and the difference of the cost recovery ratio for each agency in inter-agency transit. Using the assessment criterion. the results showed that Alternative 1 is superior to the others : Alternative 1 is considering passenger-km of each operator and unit cost of passenger-km for each operator.