• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.22 no.3
• /
• pp.624-634
• /
• 1998

The photoelastic model material with shape memory effect and the molding processes for the material are developed in this research. The matrix and fiber of the photoelastic model material developed in this research are epoxy resin (Araldite to hardner 10 to 3 (weight ratio)) and wire of $Ti_50-Ni_50$ shape memory alloy, respectively. It is called Ti50-Ni50 Shape Memory Alloy Fiber Epoxy Composite $(Ti_50-Ni_50SMA-FEC).$ Ti50-Ni50 SMA-FEC is satisfied with the requirements of the photoelastic model material and can be used as a photoelastic model material. The maximum recovering strain of $Ti_50-Ni_50$SMA-FEC is occurred at $80^{\circ}C$ in any prestrain of $Ti_50-Ni_50$ shape memory alloy fiber and in any fiber volume ratio. Recovering strain(force) is increased with the increment of the prestrain and the fiber volume ratio. The best prestrain of $Ti_50-Ni_50$SMA-FEC is 5% for the recovering force among 1%, 3%, 5%.

• Microbiology and Biotechnology Letters
• /
• v.30 no.4
• /
• pp.425-429
• /
• 2002

Saccharomyces cerevisiae KNU5377 was examined to assay the recovering capacity against heat and other stressors. Along with a particular fermentation ability that is able to produce ethanol even at high temperature such as $40^{\circ}C$ with a comparable rate to the fermentation at $33^{\circ}C$, this strain also exhibited higher viability than a reference strain owing to its own thermotolerance that conferred the survival after the severe heat shock at $60^{\circ}C$ for 30 minutes. Furthermore, this strain showed outstanding tolerances against $H_2O_2$, ethanol and some chemical compounds. But, especially due to the thermotolerance, this strain has been suspected of other species of yeast. However, ITS (internally transcribed spacer) 1 and 2 sequencing data confirmed this strain was a typical strain of S. cerevisiae. The outstanding tolerances to various environmental stressors Indicate this S. cerevisiae KNU5377 is enough to use both as an on-site potential strain for world-wide alcohol fermentation industry and as a model strain for researches into the routes to acquire the tolerance to various stressors.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2012.05a
• /
• pp.8-8
• /
• 2012

Ginseng have been traditionally used for strengthening immunity, providing nutrition and recovering health from fatigue. Recently, pharmaceutical activities of ginseng roots have been proven by many researches, and ginseng has become a world-famous medicinal plant. Ginseng saponin, ginsenoside, is one of the most important secondary metabolite in ginseng which has various pharmacological activities. Many studies have aimed to convert major ginsenosides to the more active minor ginsenoside Rg3 for consumer demand ginseng product. Microbial strain GS514 strain was isolated from soil around ginseng roots for enzymatic preparation of ginsenoside Rg3, which strain shows strong ability of converting ginsenoside Rb1and Rd into Rg3 in the solution with NaCl. The gene encoding a ${\beta}$-glucosidase from this GS514 was cloned and expressed in the BL21 (DE3) strain of Escherichia coli. The recombinant enzyme was purified and characterized. The molecular mass of purified was 87.5 kDa, as determined by SDS-PAGE. The gene sequence revealed significant homology to the family 3 glycoside hydrolases. The purified single enzyme also catalyzed the conversion of ginsenoside Rb1 into Rg3. This target enzyme will be able to produce as much saponin for consumer demand ginseng product. Anti-apoptotic proteins bind with pro-apoptotic proteins to induce apoptosis mechanism. Over expression of these anti-apoptotic proteins lead to several cancers by preventing apoptosis. Docking simulations were performed for anti-apoptotic proteins with several ginsenosides from Panax ginseng. Our finding shows ginsenosides particularly Rg3, Rh2 and Rf have more binding affinity with apoptotic proteins. Further, these docking system of each ginsenosides can be extended to experimental screen system for further brief confirmations of several diseases.

• Smart Structures and Systems
• /
• v.6 no.9
• /
• pp.1041-1056
• /
• 2010

This paper investigates the possibility of a strategy for an automatic full recover of a structural component undergoing loading-unloading (fatigue) cycles: full recover means here that no replacement is required at the end of the mission. The goal is to obtain a material capable of self healing earlier before the damage becomes irreversible. Attention is focused on metallic materials, and in particular on shape memory alloys, for which the recovering policy just relies on thermal treatments. The results of several fatigue tests are first reported to acquire a deep understanding of the physical process. Then, for cycles of constant amplitude, the self-healing objective is achieved by mounting, on the structural component of interest, a suitable microcontroller. Its input, from suitable sensors, covers the current stress and strain in the alloy. The microcontroller elaborates from the input the value of a decisional parameter and activates the thermal process when a threshold is overcome.

• Smart Structures and Systems
• /
• v.21 no.4
• /
• pp.479-491
• /
• 2018

Shape memory alloys (SMA) exhibit superelasticity which refers to the capability of entirely recovering large deformation upon removal of applied forces and dissipating input energy during the cyclic loading reversals when the environment is above the austenite finish temperature. This property is increasingly favored by the earthquake engineering community, which is currently developing resilient structures with prompt recovery and affordable repair cost after earthquakes. Compared with the other SMAs, NiTi SMAs are widely deemed as the most promising candidate in earthquake engineering. This paper contributes to evaluate the seismic performance of properly designed concentrically braced frames (CBFs) equipped with NiTi SMA braces under earthquake ground motions corresponding to frequently-occurred, design-basis and maximum-considered earthquakes. An ad hoc seismic design approach that was previously developed for structures with idealized SMAs was introduced to size the building members, by explicitly considering the strain hardening characteristics of NiTi SMA particularly. The design procedure was conducted to compliant with a suite of ground motions associated with the hazard level of design-basis earthquake. A total of four six-story CBFs were designed by setting different ductility demands for SMA braces while designating with a same interstory drift target for the structural systems. The analytical results show that all the designed frames successfully met the prescribed seismic performance objectives, including targeted maximum interstory drift, uniform deformation demand over building height, eliminated residual deformation, controlled floor acceleration, and slight damage in the main frame. In addition, this study indicates that the strain hardening behavior does not necessarily impose undesirable impact on the global seismic performance of CBFs with SMA braces.

• KSBB Journal
• /
• v.30 no.5
• /
• pp.239-244
• /
• 2015

Bacterial vaginosis (BV) is caused by microbial imbalance of the vaginal ecosystem and overgrowth of anaerobic bacteria. The antibiotic treatment often results in very high recurrence of BV because it disturbs the vaginal ecosystem. The high recurrence rates suggest a need for alternative therapeutic methods and probiotics are being recognized as alternative or additional treatment method for BV. The purpose of this study was to investigate how human vaginal isolates of Lactobacillus spp. inhibit the BV-associated pathogen Gardnerella vaginalis. Results show that selected strains significantly reduced the viability of G. vaginalis. Among these selected strains KLB410 and KLB416 were further selected based on acid/bile tolerance and identified through 16S rRNA gene sequencing being Lactobacillus plantarum. Further studies are underway to demonstrate that the selected strain can be applied as potential probiotics for recovering vaginal ecosystem.

• ALGAE
• /
• v.31 no.2
• /
• pp.155-165
• /
• 2016

Green microalgae from the class Chlorophyceae represent a major biodiversity component of eukaryotic algae in continental water. Identification and classification of this group through morphology is a hard task, since it may present cryptic species and phenotypic plasticity. Despite the increasing use of molecular methods for identification of microorganisms, no single standard barcode marker is yet established for this important group of green microalgae. Some available studies present results with a limited number of chlorophycean genera or using markers that require many different primers for different groups within the class. Thus, we aimed to find a single marker easily amplified and with wide coverage within Chlorophyceae using only one pair of primers. Here, we tested the universality of primers for different genes (tufA, ITS, rbcL, and UCP4) in 22 strains, comprising 18 different species from different orders of Chlorophyceae. The ITS primers sequenced only 3 strains and the UCP primer failed to amplify any strain. We tested two pairs of primers for rbcL and the best pair provided sequences for 10 strains whereas the second one provided sequences for only 7 strains. The pair of primers for the tufA gene presented good results for Chlorophyceae, successfully sequencing 21 strains and recovering the expected phylogeny relationships within the class. Thus, the tufA marker stands out as a good choice to be used as molecular marker for the class.

• The Journal of Internal Korean Medicine
• /
• v.27 no.3
• /
• pp.589-602
• /
• 2006

Hwangryunagyotang is supposed to have significant effects on some sorts of cardiovascular diseases like atherosclerosis. For this study. ACAT inhibitor was put in LDLR -/- mice to derive free cholesterol from it. This was to examine the effectiveness of Hwangryunnagyotang on its protecting and recovering function with endothelial cells damaged by free cholesterol through experimental. The results reported below. Hwangryunagyotang suppressed the crystallization of reactive oxygen species in macrophages and the numbers of free cholesterol crystal plate structured and reduced fragmentation of nucleus in ECV 304 cell strain by ACAT inhibitor significantly. Hwangryunagyotang also suppressed the necrosis of tissue in LDLR -/- mice' (treated with ACAT inhibitor) inflammatory portion which is adjacent to aortic root, proximal aorta and carotid artery by immunohistochemistry and fluorescence microscopy. On the whole, Hwangryunagyotang suppressed the necrosis of endothelial cells and especially it's effcet for the necrosis of para-myocardial tissues by free cholesterol. With this result, I suggest Hwangryunagyotang might have protective and recovery effects on atherosclerosis, so we need to carry on this study henceforth clinically and experimentally as well.

• Structural Engineering and Mechanics
• /
• v.82 no.1
• /
• pp.107-120
• /
• 2022

The bracing members capable of active control against seismic loads to reduce earthquake damage have been widely utilized in construction projects. Effectively reducing the structural damage caused by earthquake events, bracing systems equipped with retrofitting damper devices, which take advantage of the energy dissipation and impact absorption, have been widely used in practical construction sites. Shape Memory Alloys (SMAs) are a new generation of smart materials with the capability of recovering their predefined shape after experiencing a large strain. This is mainly due to the shape memory effects and the superelasticity of SMA. These properties make SMA an excellent alternative to be used in passive, semi-active, and active control systems in civil engineering applications. In this research, a new system in diagonal braces with slit damper combined with SMA is investigated. The diagonal element under the effect of tensile and compressive force turns to shear force in the slit damper and creates tension in the SMA. Therefore, by creating shear forces in the damper, it leads to yield and increases the energy absorption capacity of the system. The purpose of using SMA, in addition to increasing the stiffness and strength of the system, is to create reversibility for the system. According to the results, the highest capacity is related to the case where the ratio of the width of the middle section to the width of the end section (b₁/b) is 1.0 and the ratio of the height of the middle part to the total height of the damper (h₁/h) is 0.1. This is mainly because in this case, the damper section has the highest cross-section. In contrast, the lowest capacity is related to the case where b₁/b=0.1 and the ratio h₁/h=0.8.

• Korean Journal of Agricultural Science
• /
• v.50 no.4
• /
• pp.749-758
• /
• 2023

An understanding of safety problems pursuant to environmental release of GM (Genetically Modified) crops is considered important. Among the recognized safety problems, the possibilities of weediness and ecosystem invasion are constantly being validated. We herein compared the growth characteristics and germination rate of soybeans formed by hybridization with vitamin A-enhanced soybeans carrying an introduced gene that increases β-carotene content. We also examined overwintering, survival, and weed competitiveness to evaluate hybrid ecological impact on long-term unmanaged cultivatable land. These studies revealed that the hybrid soybeans exhibited intermediate growth characteristics and germination rate compared with the vitamin A-enhanced soybeans and wild soybeans, or exhibited traits similar to those of the maternal strain. Overwintering experiments were conducted by planting seeds at depths of 0, 5, 10, and 20 cm and recovering them after three or five months. After five months, all seeds at depths more than 5 cm lost viability. Among seeds recovered after three months, only wild soybeans retained viability at depths of more than 5 cm. Survival and weed competitiveness were assessed by sowing each type of seed and performing no irrigation, or pest or weed control. Quantitative assessment of numbers of individual soybean plants that appeared in the experimental plot revealed that all plants germinated after sowing, but only wild type plants survived overwintering. These studies suggest that both GM soybeans and hybrid soybeans cannot survive in uncultivated land even if they are released into the environment, which indicates less possibility of ecosystem invasion and weediness.