Browse > Article
http://dx.doi.org/10.12989/sem.2022.82.1.107

Improving the seismic behavior of diagonal braces by developing a new combined slit damper and shape memory alloys  

Vafadar, Farzad (Department of Civil Engineering, Zanjan Branch, Islamic Azad University)
Broujerdian, Vahid (School of Civil Engineering, Iran University of Science and Technology)
Ghamari, Ali (Department of Civil Engineering, Darreh Shahr Branch, Islamic Azad University)
Publication Information
Structural Engineering and Mechanics / v.82, no.1, 2022 , pp. 107-120 More about this Journal
Abstract
The bracing members capable of active control against seismic loads to reduce earthquake damage have been widely utilized in construction projects. Effectively reducing the structural damage caused by earthquake events, bracing systems equipped with retrofitting damper devices, which take advantage of the energy dissipation and impact absorption, have been widely used in practical construction sites. Shape Memory Alloys (SMAs) are a new generation of smart materials with the capability of recovering their predefined shape after experiencing a large strain. This is mainly due to the shape memory effects and the superelasticity of SMA. These properties make SMA an excellent alternative to be used in passive, semi-active, and active control systems in civil engineering applications. In this research, a new system in diagonal braces with slit damper combined with SMA is investigated. The diagonal element under the effect of tensile and compressive force turns to shear force in the slit damper and creates tension in the SMA. Therefore, by creating shear forces in the damper, it leads to yield and increases the energy absorption capacity of the system. The purpose of using SMA, in addition to increasing the stiffness and strength of the system, is to create reversibility for the system. According to the results, the highest capacity is related to the case where the ratio of the width of the middle section to the width of the end section (b1/b) is 1.0 and the ratio of the height of the middle part to the total height of the damper (h1/h) is 0.1. This is mainly because in this case, the damper section has the highest cross-section. In contrast, the lowest capacity is related to the case where b1/b=0.1 and the ratio h1/h=0.8.
Keywords
energy absorption; reversibility; shape memory alloys; slit damper;
Citations & Related Records
Times Cited By KSCI : 11  (Citation Analysis)
연도 인용수 순위
1 Hu, J.W., Noh, M.H. and Ahn, J.H. (2018), "Experimental investigation on the behavior of bracing damper systems by utilizing metallic yielding and recentering material devices", Adv. Mater. Sci. Eng., 2018, Article ID 2813058. https://doi.org/10.1155/2018/2813058.   DOI
2 Abaqus 6.18 (2018), Analysis User's Manual, Providence, Dassault Systemes, RI.
3 Alam, M., Youssef, M. and Nehdi, M. (2007), "Utilizing shape memory alloys to enhance the performance and safety of civil infrastructure: A review", Can. J. Civil Eng., 34(9), 1075-1086. https://doi.org/10.1139/l07-038.   DOI
4 McCormick, J., DesRoches, R., Fugazza, D. and Auricchio, F. (2007), "Seismic assessment of concentrically braced steel frames with shape memory alloy braces", J. Struct. Eng., 133(6), 862-870. https://doi.org/10.1061/(ASCE)0733-9445(2007)133:6(862).   DOI
5 Issa, A. and Alam, M.S. (2020), "Comparative seismic fragility assessment of buckling restrained and self-centering (friction spring and SMA) braced frames", Smart Mater. Struct., 29(5), 055029.   DOI
6 Kim, J., Kim, M. and Eldin, M.N. (2017), "Optimal distribution of steel plate slit dampers for seismic retrofit of structures", Steel Compos. Struct., 25(4), 473-484. https://doi.org/10.12989/scs.2017.25.4.473.   DOI
7 Liu, Y., Guo, Z., Liu, X., Chicchi, R. ad Shahrooz, B. (2019), "An innovative resilient rocking column with replaceable steel slit dampers: Experimental program on seismic performance", Eng. Struct., 183, 830-840, https://doi.org/10.1016/j.engstruct.2019.01.059.   DOI
8 Lee, C.H., Ju, Y.K., Min, J.K., Lho, S.H. and Kim, S.D. (2015), "Non-uniform steel strip dampers subjected to cyclic loadings", Eng. Struct., 99, 192-204. https://doi.org/10.1016/j.engstruct.2015.04.052.   DOI
9 Lee, C.H., Lho, S.H., Kim, D.H., Oh, J. and Ju, Y.K. (2016). (2016), "Hourglass-shaped strip damper subjected to monotonic and cyclic loadings", Eng. Struct., 119, 122-134. https://doi.org/10.1016/j.engstruct.2016.04.019.   DOI
10 Lee, M.H., Oh, S.H., Huh, C., Oh, Y.S., Yoon, M.H. and Moon, T.S. (2002), "Ultimate energy absorption capacity of steel plate slit dampers subjected to shear force", Steel Struct., 2, 71-79.
11 Miller, D.J., Fahnestock, L.A. and Eatherton, M.R. (2012), "Development and experimental validation of a nickel-titanium shape memory alloy self-centering buckling-restrained brace", Eng. Struct., 40, 288-298. https://doi.org/10.1016/j.engstruct.2012.02.037.   DOI
12 Mahin, S.A. (1998), "Lessons from damage to steel buildings during the Northridge earthquake", Eng. Struct., 20(4-6), 261-270. https://doi.org/10.1016/S0141-0296(97)00032-1.   DOI
13 Mccormick, J., Desroches, R. and Terriault, P. (2007), "Testing of superelastic recentering pre-strained braces for seismic resistant design", J. Earthq. Eng., 11, 1-17. https://doi.org/10.1080/13632460601031326.   DOI
14 McCormick, J., DesRoches, R., Fugazza, D. and Auricchio, F. (2007), "Seismic assessment of concentrically braced steel frames with shape memory alloy braces", J. Struct. Eng., 133(6), 862-870. https://doi.org/10.1061/(ASCE)0733-9445(2007)133:6(862).   DOI
15 Naeem, A., Nour Eldin, M., Kim, J. and Kim, J. (2017), "Seismic performance evaluation of a structure retrofitted using steel slit dampers with shape memory alloy bars", Int. J. Steel Struct., 17(4), 1627-1638. https://doi.org/10.1007/s13296-017-1227-4.   DOI
16 Tremblay, R., Archambault, M.H. and Filiatrault, A. (2003), "Seismic response of concentrically braced steel frames made with rectangular hollow bracing members", J. Struct. Eng., 129(12), 1626-1636. https://doi.org/10.1061/(ASCE)0733-9445(2003)129:12(1626).   DOI
17 Olsen, J.S., Van der Eijk, C. and Zhang, Z.L. (2008), "Numerical analysis of a new SMA-based seismic damper system and material characterization of two commercial NiTi-alloys", Smart Struct. Syst., 4(2), 137-152. https://doi.org/10.12989/sss.2008.4.2.137.   DOI
18 Seelecke, S., Heintze, O. and Masuda, A. (2002), "Simulation of Earthquake - Induced structural vibrations in systems with sma damping elements", Smart Struct. Mater. 2002: Damp. Isolation, 4697, 238-245. https://doi.org/10.1117/12.472678.   DOI
19 Takeuchi, T., Nakamura, H., Kimura, I., Hasegawa, H., Saeki, E. and Watanabe, A. (2004), "Buckling restrained braces and damping steel structures", Google Patents.
20 Yanfeng, Z. and Songye, Z. (2008), "Seismic response control of building structures with superelastic shape memory alloy wire dampers", J. Eng. Mech., 134(3), 240-251. https://doi.org/10.1061/(ASCE)0733-9399(2008)134:3(240).   DOI
21 Buehler, W.J., Gilfrich, J.V. and Wiley, R.C. (1963), "Effect of low-temperature phase changes on the mechanical properties of alloys near composition TiNi", Appl. Phys., 34(147), 5-7. https://doi.org/10.1063/1.1729603.   DOI
22 Lee, J. and Kim, J. (2015), "Seismic performance evaluation of moment frames with slit-friction hybrid dampers", Earthq. Struct., 9(6), 1291-1311. https://doi.org/10.12989/eas.2015.9.6.1291.   DOI
23 Mahmoudi, M., Montazeri, S. and Abad, M.J.S. (2018), "Seismic performance of steel X-knee-braced frames equipped with shape memory alloy bars", J. Constr. Steel Res., 147, 171-186. https://doi.org/10.1016/j.jcsr.2018.03.019.   DOI
24 Dolce, M., Cardone, D., Ponzo, F.C. and Valente, C. (2005), "Shaking table tests on reinforced concrete frames with out and with passive control systems", Earthq. Eng. Struct. Dyn., 34(14), 1687-1717. https://doi.org/10.1002/eqe.501.   DOI
25 Christopoulos, C., Tremblay, R., Kim, H.J. and Lacerte, M. (2008), "Self-centering energy dissipative bracing system for the seismic resistance of structures: Development and validation", J. Struct. Eng., 134(1), 96-107. https://doi.org/10.1061/(ASCE)0733-9445(2008)134:1(96).   DOI
26 Jaber, M.B., Smaoui, H. and Terriault, P. (2008), "Finite element analysis of a shape memory alloy three-dimensional beam based on a finite strain description", Smart Mater. Struct., 17(4), 045005.   DOI
27 Asgarian, B. and Moradi, S. (2011), "Seismic response of steel braced frames with shape memory alloy braces", J. Constr. Steel Res., 67, 65-74. https://doi.org/10.1016/j.jcsr.2010.06.006.   DOI
28 Barkhori, M., Maleki, S., Mirtaheri, M., Nazeryan, M. and Kolbadi, S.M.S. (2020), "Investigation of shear lag effect on tension members fillet-welded connections consisting of single and double channel sections", Struct. Eng. Mech., 74(3), 445-455. https://doi.org/10.12989/sem.2020.74.3.445.   DOI
29 Benavent-Climent, A. (2008), "Development and application of passive structural control systems in the moderate-seismicity mediterranean area", The 14 th World Conference on Earthquake Engineering, Beijing.
30 Benavent-Climent, A. (2010), "A new hysteretic damper based on yielding of I-Shape sections for seismic protection of buildings", 14 ECEE.
31 Mirtaheri, M., Sehat, S. and Nazeryan, M. (2018), "Improving the behavior of buckling restrained braces through obtaining optimum steel core length", Struct. Eng. Mech., 65(4), 401-408. https://doi.org/10.12989/sem.2018.65.4.401.   DOI
32 Mirtaheri, S.M., Nazeryan, M., Bahrani, M.K., Nooralizadeh, A., Montazerian, L. and Naserifard, M. (2017), "Local and global buckling condition of all-steel buckling restrained braces", Steel Compos. Struct., 23(2), 217-228. https://doi.org/10.12989/scs.2017.23.2.217.   DOI
33 Oh, S.H., Kim, Y.J. and Ryu, H.S. (2009), "Seismic performance of steel structures with slit dampers", Eng. Struct., 31(9), 1997-2008. https://doi.org/10.1016/j.engstruct.2009.03.003.   DOI
34 Ozbulut, O.E., Roschke, P.N., Lin, P.Y. and Loh, C.H. (2010), "GA-based optimum design of a shape memory alloy device for seismic response mitigation", Smart Mater. Struct., 19(6), 065004.   DOI
35 Tremblay, R. and Christopoulos, C. (2012), "Self-centering energy dissipative brace apparatus with tensioning elements", U.S. Patent No. 8,250,818, Patent and Trademark Office, Washington, DC, U.S.
36 Noureldin, M., Naeem, A. and Kim, J. (2018), "Life-cycle cost evaluation of steel structures retrofitted with steel slit damper and shape memory alloy-based hybrid damper", Adv. Struct. Eng., 22(1), 3-16. https://doi.org/10.1177/1369433218773487   DOI
37 Dolce, M. and Cardone, D. (2006), "Theoretical and experimental studies for the application of shape memory alloys in civil engineering", J. Eng. Mater. Technol., Tran., ASME, 128(3), 302-311. https://doi.org/10.1115/1.2203106.   DOI
38 Wang, W., Fang, C., Zhang, A. and Liu, X. (2019), "Manufacturing and performance of a novel self-centring damper with shape memory alloy ring springs for seismic resilience", Struct. Control Hlth. Monit., 26, e2337. https://doi.org/10.1002/stc.2337.   DOI
39 Tremblay, R. and Robert, N. (2001), "Seismic performance of low-and medium-rise chevron braced steel frames", Can. J. Civil Eng., 28(4), 699-714. https://doi.org/10.1139/l01-038.   DOI
40 Wada, A., Huang, Y.H., Yamada, T., Ono, Y., Sugiyama, S., Baba, M. and Miyabara, T. (1997), "Actual size and real time speed tests for hysteretic steel damper", Proc. Stessa, 97, 778-785.
41 Preciado, A., Ramirez-Gaytan, A., Gutierrez, N., Vargas, D., Falcon, J.M. and Ochoa, G. (2018), "Nonlinear earthquake capacity of slender old masonry structures prestressed with steel, FRP and NiTi SMA tendons", Steel Compos. Struct., 26(2), 213-226. https://doi.org/10.12989/scs.2018.26.2.213.   DOI
42 Seo J., Kim, Y.C. and Hu J.W. (2015), "Pilot study for investigating the cyclic behavior of slit damper systems with recentering Shape Memory Alloy (SMA) bending bars used for seismic restrainers", Appl. Sci., 5(3), 187-208. https://doi.org/10.3390/app5030187.   DOI
43 Casciati, F. and van der Eijk, C. (2008), "Variability in mechanical properties and microstructure characterization of CuAlBe shape memory alloys for vibration mitigation", Smart Struct. Syst., 4(2), 103-121. https://doi.org/10.12989/sss.2008.4.2.103.   DOI
44 Tagawa, H., Yamanishi, T., Takaki, A. and Chan, R.W.K. (2015), "Cyclic behavior of seesaw energy dissipation system with steel slit dampers", J. Constr. Steel Res., 117, 24-34. https://doi.org/10.1016/j.jcsr.2015.09.014.   DOI
45 Canxing, Q. and Songye, Z. (2017), "Shake table test and numerical study of self-centering steel frame with SMA braces", Earthq. Eng. Struct. Dyn., 46, 117-137. https://doi.org/10.1002/eqe.2777.   DOI
46 Canxing, Q., Hongyang, W., Jiawang, L., Jian, Q. and Yanming, W. (2020), "Experimental tests and finite element simulations of a new SMA-steel damper", Smart Mater. Struct., 29(3), 035016.   DOI
47 Casciati, S. and Marzi, A. (2010), "Experimental studies on the fatigue life of shape memory alloy bars", Smart Struct. Syst., 6(1), 73-85. https://doi.org/10.12989/sss.2010.6.1.073.   DOI
48 Chan, R. and Albermani, F. (2008), "Experimental study of steel slit damper for passive energy dissipation", Eng. Struct., 30, 1058-1066. https://doi.org/10.1016/j.engstruct.2007.07.005.   DOI
49 Chowdhury, M.A., Rahmzadeh, A., Moradi, S. and Alam, M.S. (2019), "Feasibility of using reduced length superelastic shape memory alloy strands in post-tensioned steel beam-column connections", J. Intel. Mater. Syst. Struct., 30(2), 283-307. https://doi.org/10.1177/1045389X18806393.   DOI
50 Clark, P.W., Aiken, I.D., Kelly, J.M., Higashino, M. and Krumme, R.C. (1995), "Experimental and analytical studies of shape memory alloy dampers for structural control", Smart Struct. Mater. 1995: Passive Damp., 2445, 241-251. https://doi.org/10.1117/12.208891.   DOI
51 Evard, M.E., Volkov, A.E. and Bobeleva, O.V. (2006), "An approach for modelling fracture of shape memory alloy parts", Smart Struct. Syst., 2(4), 357-363. https://doi.org/10.12989/sss.2006.2.4.357.   DOI
52 Dolce, M., Cardone, D. and Marnetto, R. (2000), "Implementation and testing of passive control devices based on shape memory alloys", Earthq. Eng. Struct. Dyn., 29(7), 945-968. https://doi.org/10.1002/1096-9845(200007)29:7<945::AIDEQE958>3.0.CO;2-%23.   DOI
53 Zhu, S. and Zhang, Y. (2007), "Seismic behaviour of self-centring braced frame buildings with reusable hysteretic damping brace", Earthq. Eng. Struct. Dyn., 36(10), 1329-1346. https://doi.org/10.1002/eqe.683.   DOI
54 Zareie, S., Issa, A.S., Seethaler, R.J. and Zabihollah, A. (2020), "Recent advances in the applications of shape memory alloys in civil infrastructures: A review", Struct., 27, 1535-1550. https://doi.org/10.1016/j.istruc.2020.05.058.   DOI
55 Ghabraie, K., Chan, R., Huang, X. and Xie, Y.M. (2010), "Shape optimization of metallic yielding devices for passive mitigation of seismic energy", Eng. Struct., 32, 2258-2267. https://doi.org/10.1016/j.engstruct.2010.03.028.   DOI
56 Ghaffarzadeh, H. and Mansouri, A. (2008), "Investigation of the behavior factor in sma braced frames", The 14th World Conference on Earthquake Engineering, Beijing, China.
57 Ghods, S., Kheyroddin, A., Nazeryan, M., Mirtaheri, S.M. and Gholhaki, M. (2016), "Nonlinear behavior of connections in RCS frames with bracing and steel plate shear wall", Steel Compos. Struct., 22(4), 915-935. https://doi.org/10.12989/scs.2016.22.4.915.   DOI
58 Hooshmand, M., Rafezy, B. and Khalil, A.J. (2013), "Study of seismic behaviour in steel structures by using of combination braces of steel and SMA", J. Civil Environ. Eng. (Univ. Tabriz), 43(3), 11-22.
59 Guo H. (2005), "Shear lag effects on welded hot-rolled steel channels in tension", Master Thesis, Faculty of Graduate Studies and Research in Partial Fulfillment of Requirements, The Uinversity of Alberta.
60 Han, Y.L., Li, Q.S., Li, A.Q., Leung, A.Y.T. and Lin, P.H. (2003), "Structural vibration control by shape memory alloy damper", Earthq. Eng. Struct. Dyn., 32, 438-494. https://doi.org/10.1002/eqe.243.   DOI
61 Hu, J.W. (2014), "Investigation on the cyclic response of superelastic Shape Memory Alloy (SMA) slit damper devices simulated by quasi-static Finite Element (FE) analyses", Mater., 7(2), 1122-1141. https://doi.org/10.3390/ma7021122.   DOI
62 Haque, A.R. and Alam, M.S. (2017), "Hysteretic behaviour of a piston based self-centering (PBSC) bracing system made of superelastic SMA bars-a feasibility study", Struct., 12, 102-114. https://doi.org/10.1016/j.istruc.2017.08.004.   DOI