• Archives of Plastic Surgery
• /
• 제48권6호
• /
• pp.630-634
• /
• 2021

To date, there have been no reports of patients showing a Tessier number 7 cleft with unilateral complete cleft lip and palate. Furthermore, no studies have established the sequence, plan, or timing of surgical methods for treating patients presenting the above anomalies simultaneously. We report a case of a Tessier number 7 cleft with unilateral complete cleft lip and palate. Two months after birth, lip adhesion was performed on the unilateral complete cleft lip and total excision was performed on the skin tag. At 4 months of age, Tessier number 7 cleft was corrected. At 6 months of age, surgery involving two small triangular flaps was performed on the unilateral incomplete cleft lip after performing lip adhesion. At 13 months of age, two-flap palatoplasty with a vomer flap was performed on the complete cleft palate. At 6 years of age, open rhinoplasty was performed on the unilateral cleft lip nose deformity. At 9 years of age, bone grafting was performed for the alveolar cleft. At follow-up appointments up to 13 years of age, there were no major complications. Here, we present this patient, surgical procedures and timelines, and show our results demonstrating good postoperative outcomes.

• Archives of Plastic Surgery
• /
• 제50권1호
• /
• pp.125-129
• /
• 2023

Three-dimensional (3D) video exoscopes are high-magnification stereo cameras that project onto monitors mounted in the operating room, viewable from different angles. Outside of plastic surgery, exoscopes have been shown to successfully improve the ergonomics of microsurgery, though sometimes with prolonged operating times. We compare a single surgeon's early experience performing free flap procedures from 2020 to 2021 using either a binocular microscope or a 3D video exoscope. Ten procedures were performed with the standard operating microscope and 8 procedures with the 3D exoscope. The microsurgeon, having minimal prior experience using an exoscope, reported less neck discomfort following the free flap procedures performed with the exoscope compared with the binocular surgical microscope. Total average operating time was comparable between the standard surgical microscope and the 3D exoscope (13.7 vs. 13.4 hours, p = 0.34). Our early experience using a 3D exoscope in place of a standard optical microscope demonstrated that the exoscope shows promise, offering an ergonomic alternative during microvascular reconstruction without increasing overall operating times. Future studies will compare free flap ischemia time between cases performed using the exoscope and the conventional binocular microscope. Medical Subject Headings authorized following words: free tissue flaps; operating rooms; ergonomics; microsurgery.

• Archives of Plastic Surgery
• /
• 제47권3호
• /
• pp.277-280
• /
• 2020

Functionally, the lip serves to prevent food and drink from spilling out of the beginning of the gastrointestinal tract, and it is also used for vocalization. In addition, the lip has cosmetic importance as part of the face involved in making expressions, and in many cultures, it is considered to be sexually appealing. The results of lip reconstruction procedures must therefore be both functionally and cosmetically satisfactory. When the orbicularis oris muscle and oral mucosa are excised, functional reconstruction is prioritized. In contrast, if there are no functional problems, cosmetic reconstruction is the main focus. This case involved the reconstruction of a right upper lip defect caused by a dog bite. When the skin defect was covered with a local flap, the right angulus oris shifted medially, so we incorporated a YV flap at the right angulus oris to modify its position and allow for a cosmetically satisfactory result. We believe that this method can be used not only for cases in which asymmetry of the angulus oris is expected to occur at the time of lip reconstruction, but also for cases in which it has already occurred in the initial operation.

• Archives of Plastic Surgery
• /
• 제32권6호
• /
• pp.796-797
• /
• 2005

In plastic and reconstructive craniomaxillofacial surgery, careful preoperative planning is essential to get a successful outcome. Many craniomaxillofacial surgeons have used imaging modalities like conventional radiographs, computed tomography(CT) and magnetic resonance imaging(MRI) for supporting the planning process. But, there are a lot of limitations in the comprehension of the surgical anatomy with these modalities. Medical models made with rapid prototyping (RP) technique represent a new approach for preoperative planning and simulation surgery. With rapid prototyping models, surgical procedures can be simulated and performed interactively so that surgeon can get a realistic impression of complex structures before surgical intervention. The great advantage of rapid prototyping technique is the precise reproduction of objects from a 3-dimensional reconstruction image as a physical model. Craniomaxillofacial surgeon can establish treatment strategy through preoperative simulation surgery and predict the postoperative result.

• Archives of Plastic Surgery
• /
• 제33권2호
• /
• pp.263-267
• /
• 2006

In both cosmetic and functional aspects, loss of digital pulp is a common problem. Compound or composite defects of the hand and fingers with exposed denuded tendon, bone, joint, or neurovascular structures may require flap coverage. Most often these lesions can be repaired by using simple local flap, neurovascular flap, thenar flap, and cross-finger flap. But microvascular reconstruction is sometimes needed for large defects. But Authors do not recommend these procedures in case of severe crushing injuries involving multiple finger pulp losses because they have possibility of damage of the vascular network and infection. So we applied distant flaps such as chest flaps, groin flaps, abdominal flaps and etc. And then we applied surgical rubber gloves for remodeling the flap after cutaneous healing. We have acquired satisfactory results, after the simple molding method for distant flap finger by using surgical rubber gloves treatment.

• Archives of Plastic Surgery
• /
• 제39권4호
• /
• pp.309-316
• /
• 2012

Computer aided design and manufacturing (CAD/CAM) technology today is the standard in manufacturing industry. The application of the CAD/CAM technology, together with the emerging 3D medical images based virtual surgical planning (VSP) technology, to craniomaxillofacial reconstruction has been gaining increasing attention to reconstructive surgeons. This article illustrates the components, system and clinical management of the VSP and CAD/CAM technology including: data acquisition, virtual surgical and treatment planning, individual implant design and fabrication, and outcome assessment. It focuses primarily on the technical aspects of the VSP and CAD/CAM system to improve the predictability of the planning and outcome.

• 대한두개안면성형외과학회지
• /
• 제24권3호
• /
• pp.129-132
• /
• 2023

Scalp defects necessitate diverse approaches for successful reconstruction, taking into account factors such as defect size, surrounding tissue, and recipient vessel quality. This case report presents a challenging scenario involving a temporal scalp defect where ipsilateral recipient vessels were unavailable. The defect was effectively reconstructed utilizing a transposition flap and a latissimus dorsi free flap, which was anastomosed to the contralateral recipient vessels. Our report underscores the successful reconstruction of a scalp defect in the absence of ipsilateral recipient vessels, emphasizing the importance of employing appropriate surgical interventions without necessitating vessel grafts.

• 대한두개안면성형외과학회지
• /
• 제22권6호
• /
• pp.296-302
• /
• 2021

Background: The reconstruction of large full-thickness alar defects requires complex surgical procedures that are usually performed in two stages, with concomitant disadvantages in terms of patient trauma, surgical risk, and cost. This study presents a functional folded nasolabial island flap (FNIF) that can be used to repair large-sized full-thickness alar defects in a straightforward manner. Methods: This retrospective study included seven patients who received a FNIF for a full-thickness alar defect between January 2007 and December 2020. The FNIF is different from the conventional nasolabial flap in that it is folded and twisted to achieve nostril reconstruction with a satisfactory three-dimensional mucosal lining in a single stage. The cosmetic and functional results of FNIF were evaluated by both patients and physicians. Results: The age ranged from 51 to 82 years (mean, 65.6 years). The causes of the defects were squamous cell carcinoma, basal cell carcinoma, and trigeminal trophic syndrome. The nostril lining did not collapse, there was no hypertrophic scarring, and air movement through the nostrils on the flap side was normal. Overall, FNIF produced excellent aesthetic and functional outcomes, with minimal patient discomfort. There were no postoperative complications. Conclusion: Compared with existing reconstruction methods for large full-thickness alar defects, FNIF can easily achieve aesthetic and functional success in a single-stage procedure. It provides satisfactory results for both the patient and the surgeon.

• Archives of Plastic Surgery
• /
• 제44권3호
• /
• pp.223-227
• /
• 2017

Background Carpal tunnel release is one of the most common surgical procedures performed by hand surgeons. The authors created a surgical simulation of open carpal tunnel release utilizing a mobile and rehearsal platform app. This study was performed in order to validate the simulator as an effective training platform for carpal tunnel release. Methods The simulator was evaluated using a number of metrics: construct validity (the ability to identify variability in skill levels), face validity (the perceived ability of the simulator to teach the intended material), content validity (that the simulator was an accurate representation of the intended operation), and acceptability validity (willingness of the desired user group to adopt this method of training). Novices and experts were recruited. Each group was tested, and all participants were assigned an objective score, which served as construct validation. A Likert-scale questionnaire was administered to gauge face, content, and acceptability validity. Results Twenty novices and 10 experts were recruited for this study. The objective performance scores from the expert group were significantly higher than those of the novice group, with surgeons scoring a median of 74% and medical students scoring a median of 45%. The questionnaire responses indicated face, content, and acceptability validation. Conclusions This mobile-based surgical simulation platform provides step-by-step instruction for a variety of surgical procedures. The findings of this study help to demonstrate its utility as a learning tool, as we confirmed construct, face, content, and acceptability validity for carpal tunnel release. This easy-to-use educational tool may help bring surgical education to a new- and highly mobile-level.

• Archives of Plastic Surgery
• /
• 제42권2호
• /
• pp.223-225
• /
• 2015

The closure of any circular or asymmetric wound can result in puckering or an excess of tissue known as a 'dog ear'. Understanding the mechanism of dog ear formation is a fundamental requirement necessary to facilitate an appropriate treatment. Many solutions have been reported in the literature, but in all cases, the correction entails the extension of the scar and the sacrifice of the dermal plexus. Here, we propose a novel technique of dog ear correction by using a three-bite suture that sequentially pierces the deep fascial plane and each dog ear's margin, thus allowing for flattening the dog ear by anchoring the over-projecting tissue to the deep plane. The three-bite technique proved to be a fast, easy, and versatile method of immediate dog ear correction without extending the scar, while maintaining a full and complete local skin blood supply.