• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.1141-1146
• /
• 2009

The compressibility of clay has been expressed e-log p' graph. In natural clay, e-log p' graph are changed by deposition condition and chemical cementation as well as Atterberg limits, whereas in reconstituted clay, it is generally known that e-log p’ curve is varied with Atterberg limits. However, e-log p' graph is possible to change according to the reconstituting methods and test conditions. In this study, consolidation tests are performed as various test condition for reconstituted Busan clay. Test results show that the relationship e/$e_L$ and log p' is almost constant with $e_L$. And the compression index obtained from slurry method sample is larger than one obtained from kneading method sample. Intrinsic compression line (ICL) of Busan clay is identical with ICL suggested by Burland.

• Geomechanics and Engineering
• /
• 제7권2호
• /
• pp.213-231
• /
• 2014

An elastoplastic model for structured clays, which is formulated based on the fact that the difference in mechanical behavior of structured and reconstituted clays is caused by the change of fabric in the post-yield deformation range, is present in this paper. This model is developed from an elastoplastic model for overconsolidated reconstituted clays, by considering that the variation in the yield surface of structured clays is similar to that of overconsolidated reconstituted clays. However, in order to describe the mechanical behavior of structured clays with precision, the model takes the bonding and parabolic strength envelope into consideration. Compared with the Cam-clay model, only two new parameters are required in the model for structured clays, which can be determined from isotropic compression and triaxial shear tests at different confining pressures. The comparison of model predictions and results of drained and undrained triaxial shear tests on four different marine clays shows that the model can capture reasonable well the strength and deformation characteristics of structured clays, including negative and positive dilatancy, strain-hardening and softening during shearing.

• 한국농공학회논문집
• /
• 제52권3호
• /
• pp.73-79
• /
• 2010

In the present study, the loading frequency dependencies of cyclic shear strength and elastic shear modulus of reconstituted clay were examined by performing undrained cyclic triaxial tests and undrained cyclic triaxial tests to determine deformation properties. The result of undrained cyclic triaxial test of reconstituted and saturated clay shows that a faster frequency leads to higher stress amplitude ratio, but when the frequency becomes fast up to a certain point, the stress amplitude ratio will reach its maximum limit and the frequency dependence becomes insignificant. And also, the result of undrained cyclic triaxial deformation test shows a fact that a faster loading frequency leads to higher equivalent shear modules and smaller hysteresis damping ratio, and confirms the frequency dependence of cohesive soil. Meanwhile, the result of the creep test shows that continuing creep is created in the undrained cyclic triaxial test with slow loading frequency rate, and since loading rate becomes slower at the vicinity of the maximum and the minimum deviator stress due to sine wave loading, the vicinity of the maximum and the minimum deviator stress shall be more influenced by creep.

• 한국지반공학회논문집
• /
• 제29권3호
• /
• pp.5-13
• /
• 2013

압축지수는 점토의 압축특성을 나타내는 대표적인 물성치로 압밀시험으로 직접 결정하거나, 점토의 기본 물성으로부터 경험적 방법으로 추정한다. 그러나 자연점토의 압축지수는 지반 물성치뿐 아니라 퇴적상태에 영향을 받으므로 경험적 추정방법은 지역적 한계를 지닌다. 본 연구에서는 재성형점토의 압축특성을 이용하여 지반 물성치로부터 자연 점토의 압축지수를 추정하는 새로운 방법을 제안하였다. 부산점토의 압밀시험 결과를 통해 제안방법의 적합성을 검증하였으며, 오차원인을 분석하였다. 분석결과 제안된 방법은 경험적 추정방법보다 압축지수를 정확하게 추정하였다. 제안방법의 오차는 가정사항에 의해 발생하며, 추정오차는 $e_{cross}/e_0$와 명확한 반비례 관계를 나타냈다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.971-980
• /
• 2010

Evaluation of permeability and coefficient of consolidation of clayey sand is critical to analyze ground stability or environmental problems such as diffusion and dispersion in groundwater flow. Permeability tests using a flexible wall permeameter were performed to derive the coefficient of consolidation and permeability of reconstituted soil samples with various mixing ratios of kaolin clays and two different types of sands, Jumunjin sand and Ottawa sand. The test results indicated that coefficient of consolidation and permeability in log scale have linear relationships with clay contents in low clay mixing ratio. It is also recognized that coefficient of consolidation and permeability of sand and clay mixture are also dependent on the soil structure.

• Geomechanics and Engineering
• /
• 제8권1호
• /
• pp.81-95
• /
• 2015

The permeability behavior of Ariake clays has been investigated by constant rate of strain (CRS) consolidation tests with vertical or radial drainage. Three types of Ariake clays, namely undisturbed Ariake clay samples from the Saga plain, Japan (aged Ariake clay), clay deposit in shallow seabed of the Ariake Sea (young Ariake clay) and reconstituted Ariake clay samples using the soil sampled from the Saga plain, were tested. The test results indicate that the deduced permeability in the horizontal direction ($k_h$) is generally larger than that in the vertical direction ($k_v$). Under odometer condition, the permeability ratio ($k_h/k_v$) increases with the vertical strain. It is also found that the development of the permeability anisotropy is influenced by the inter-particle bonds and clay content of the sample. The aged Ariake clay has stronger initial inter-particle bonds than the young and reconstituted Ariake clays, resulting in slower increase of $k_h/k_v$ with the vertical strain. The young Ariake clay has higher clay content than the reconstituted Ariake clay, resulting in higher values of $k_h/k_v$. The microstructure of the samples before and after the consolidation test has been examined qualitatively by scanning electron microscopy (SEM) image and semi-quantitatively by mercury intrusion porosimetry (MIP) tests. The SEM images indicate that there are more cut edges of platy clay particles on a vertical plane (with respect to the deposition direction) and there are more faces of platy clay particles on a horizontal plane. This tendency increases with the increase of one-dimensional (1D) deformation. MIP test results show that using a sample with a larger vertical surface area has a larger cumulative intruded pore volume, i.e., mercury can be intruded into the sample more easily from the horizontal direction (vertical plane) under the same pressure. Therefore, the permeability anisotropy of Ariake clays is the result of the anisotropic microstructure of the clay samples.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2000년도 춘계학술대회 논문집
• /
• pp.399-406
• /
• 2000

In this study, using the CRS consolidation tests on reconstituted marine clay, the characteristics of C$\sub$v/, k, e and $\varepsilon$, the anisotropic characteristics of specimen according to the rate of strain were estimated. Also, the validity of the Wissa et al.(1971) consolidation theory on CRS(Constant Rate of Strain) consolidation tests were reviewed. From that results, it was shown that the value of C$\sub$v/, k and u$\sub$b/ was increased as the rate of strain was increased. While the difference of the value( C$\sub$v/, k and u$\sub$b/) between vertically reconstituted specimen and horizontally reconstituted specimen became small as the rate of strain was increased. It is known that k is different due to the hydraulic gradient(i) during the CRS consolidation tests. The subject of this study is to distinguish steady state from transient state in CRS consolidation tests. Consequently, the difference of the value(C$\sub$v/ and k) is higher in case of vertically reconstituted specimen than horizontally reconstituted specimen.

• Geomechanics and Engineering
• /
• 제10권3호
• /
• pp.335-355
• /
• 2016

Most laboratory test research has focused on grouting efficiency in homogeneous reconstituted soft clay. However, the natural sedimentary soils generally behave differently from reconstituted soils due to the effect of soil structure. A series of laboratory grouting tests were conducted to research the effect of soil structure on the performance of compensation grouting. The effects of grouting volume, overlying load and grouting location on the performance of compensation grouting under different soil structures were also studied. Reconstituted soil was altered with added cement to simulate artificial structured soil. The results showed that the final grouting efficiency was positive and significantly increased with the increase of stress ratio within a certain range when grouting in normally consolidated structured clay. However, in the same low yield stress situation, the artificial structured soil had a lower final grouting efficiency than the overconsolidated reconstituted soil. The larger of normalized grouting volume could increase the final grouting efficiency for both reconstituted and artificial structured soils. Whereas, the effect of the overlying load on final grouting efficiencies was unfavourable, and was independent of the stress ratio. As for the layered soil specimens, grouting in the artificial structured soil layer was the most efficient. In addition, the peak grouting pressure was affected by the stress ratio and the overlying load, and it could be predicted with an empirical equation when the overlying load was less than the yield stress. The end time of primary consolidation and the proportion of secondary consolidation settlement varied with the different soil structures, grouting volumes, overlying loads and grouting locations.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1998년도 가을 학술발표회 논문집
• /
• pp.453-460
• /
• 1998

• 한국지반공학회논문집
• /
• 제27권9호
• /
• pp.37-46
• /
• 2011

압축지수는 점토의 압축특성을 나타내는 대표적인 물성치로, 압밀시험을 통해 직접 결정하거나 기본 물성으로부터 경험적으로 추정한다. 본 연구에서는 부산 및 인천점토의 퇴적상태를 파악하고 이것이 압축지수 추정식에 미치는 영향에 분석하였다. 이를 위해 부산 및 인천 점토의 재성형점토 압밀시험을 수행하고 자연점토 압밀시험 결과를 분석하였다. 분석결과 부산점토는 SCL보다 높은 간극지수를, 인천점토는 SCL보다 낮은 간극지수를 나타냈다. 퇴적상태를 나타내는 ${\Delta}e_r$을 압축지수 추정오차와 비교한 결과 액성한계 및 소성지수로 추정한 압축지수의 추정오차는 ${\Delta}e_r$이 증가함에 따라 감소하는 경향이 나타났다. 본 연구에서는 이러한 관계를 이용하여 부산 및 인천점토의 압축지수를 보다 정확히 추정할 수 있는 방법을 제안하였다.