• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.4
• /
• pp.381-391
• /
• 2010

In this paper, a novel frequency reconfigurable active array antenna(RAA) system, which can be reconfigurable for three reconfigurable frequency bands, is proposed by using commercial RF MEMS switches. The MEMS switch shows excellent insertion loss, linearity, as well as isolation. So, the system performance degradation of the reconfigurable system by using MEMS switches can be minimized. The proposed frequency reconfigurable active antenna system is consisted with the noble frequency reconfigurable front-end amplifiers(RFA) with the simple reconfigurable impedance matching circuits(RMC), reconfigurable antenna elements(RAE), as well as a reconfiguration control board(RCB) for MEMS switch control. The proposed RAA system can be reconfigurable for three frequency bands, 850 MHz, 1.9 GHz, and 3.4 GHz, with $2{\times}2$ array of the RAE having broadband printed dipole antenna topology. The validity of the proposed RFA as well as RAA is also presented with the experimental results of the fabricated systems.

• Journal of electromagnetic engineering and science
• /
• v.7 no.4
• /
• pp.154-160
• /
• 2007

A reconfigurable multi-band mixer for the SDR system is proposed. The proposed reconfigurable mixer is operated between $850\;MHz{\sim}2\;GHz$, which includes all commercial mobile communication service. Because the varactor diodes are used to select a specific frequency and to adjust the impedance characteristic of the selected frequency band, the proposed reconfigurable mixer can be achieved to similar performance across all of the tuning range. In addition, the designed reconfigurable mixer is applicable for the SDR system since it has a single signal path for the multi-band signals and wide band tuning range.

• Korean Journal of Computational Design and Engineering
• /
• v.22 no.2
• /
• pp.129-140
• /
• 2017

This paper presents a systematic approach for design of timely and proper layouts of a manufacturing system facilitating reconfigurability, referred to as a reconfigurable manufacturing system. A proper methodology for design of a system layout is required for reconfiguration planning - adding or removing machines for supplying the exact capacity needed to fulfill market demands, as well as minimizing the cost of adding new machines. In this paper, theory of constraints is used to make reconfiguration manufacturing systems more cost-effective and efficiency. The proposed approach is validated by using a real industrial case. This paper suggests that the proposed study should be performed concurrently with the design of a new manufacturing system.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2007.11a
• /
• pp.69-70
• /
• 2007

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.11a
• /
• pp.271-272
• /
• 2010

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1355-1360
• /
• 2005

In this paper, we approach the problem of image filter design automation using a kind of intrinsic evolvable hardware architecture. For the purpose of implementing the intrinsic evolution process in a common FPGA chip and evolving a complicated digital circuit system-image filter, the design automation system employs the reconfigurable circuit architecture as the reconfigurable component of the EHW. The reconfigurable circuit architecture is inspired by the Cartesian Genetic Programming and the functional level evolution. To increase the speed of the hardware evolution, the whole evolvable hardware system which consists of evolution algorithm unit, fitness value calculation unit and reconfigurable unit are implemented by a commercial FPGA chip. The Celoxica RC1000 card which is fitted with a Xilinx Virtex xcv2000E FPGA chip is employed as the experiment platform. As the result, we conclude the terms of the synthesis report of the image filter design automation system and hardware evolution speed in the Celoxica RC1000 card. The evolved image filter is also compared with the conventional image filter form the point of filtered image quality.

• Journal of IKEEE
• /
• v.24 no.1
• /
• pp.186-193
• /
• 2020

In this paper, we propose a multi-threading system to support reconfigurable hardware accelerators on Zynq SoC. We implement high-performance JPEG decoder with reconfigurable 2D IDCT hardware accelerators to achieve maximum performance available on the platform. In this system, up to four reconfigurable hardware accelerators synchronized with SW threads can be dynamically reconfigured to provide adaptive computing capabilities according to the given image resolution and the compression ratio. JPEG decoding is operated using images with resolutions 480p, 720p, 1080p at the compression ratio of 7:1-109:1. We show that significant performance improvements are achieved as the image resolution or the compression ratio increase. For 1080p resolution, the performance improvement is up to 79.11 times with throughput speed of 99 fps at the compression ratio 17:1.

• Journal of Institute of Control, Robotics and Systems
• /
• v.11 no.12
• /
• pp.1002-1010
• /
• 2005

We study on the implementation of reconfigurable position control system which is based on Open Control Platform(OCP) for Unmanned Expedition Vehicles(UEV) in ubiquitous environment. The control system uses hierarchical control structure and OCP structure which contains three layers such as core OCP, reconfigurable control API(Application Programmer Interface), generic hybrid control API. The goal of our research is to implement an UEV control system using advanced software technology. As a specific control problem, we study a transition management problem between PID control and neural network control depending on fault or parameter change of the plant, i.e., UEV. The concept of the OCP-based software-enabled control can provide synergy effect by the integration of software component, middleware, network communication, and control, and thus can be applied to various systems in ubiquitous environment.

• Journal of Institute of Control, Robotics and Systems
• /
• v.9 no.2
• /
• pp.99-106
• /
• 2003

A new reconfigurable model following flight control method based on direct adaptive scheme is presented. Using the timescale separation principle, both the inner-loop and the outer-loop states are controlled simultaneously. For the timescale separation assumption to be satisfied, the inner-loop model dynamics is set to be fast whereas the outer-loop model dynamics is set to be relatively slow. The stability and convergence of the proposed control law is proved by Lyapunov theorem. One of the merits of the proposed reconfigurable controller is that the FDI process and the persistent input excitation are not necessary, which is suitable for the flight control system. To evaluate the reconfiguration performance of the proposed control method, numerical simulation is performed using six degree-of-freedom nonlinear dynamics.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.7
• /
• pp.775-782
• /
• 2016

In this paper, we presented the paper-based reconfigurable frequency selective surface(FSS) for transmitting or blocking the wireless LAN signal in indoor environments. The proposed reconfigurable FSS are designed on coated paper using a printing of conductive ink and conductive adhesive for PIN diode, which provides ON/OFF of the reconfigurable FSS for passing or blocking the 5GHz signal. The reconfigurable FSS attached on the wall can pass or block the incident wireless signal as the received signal strength in indoor. To provide the validity of the proposed FSS, we fabricated the reconfigurable FSS on the paper and confirmed the very similar results between simulations and measurements. From the measured results of the proposed spectrum control system, we know that the proposed reconfigurable FSS can block about 20dB at 5.745GHz~5.805GHz.