• Journal of the Korean Data and Information Science Society
• /
• v.17 no.1
• /
• pp.77-86
• /
• 2006

This study is to investigate the error of prediction value with related variables from the recommended system and to examine the error of prediction value with related variables. To decrease the error on the collaborative recommended system on user based, this research explored the effects on the prediction related response pair between raters' demographic variables and Pearson's coefficient and sparsity. The result shows comparative analysis between existing error of prediction value and conditioned one.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.27 no.2
• /
• pp.95-98
• /
• 2023

Purpose: The precision error of a bone density meter reflects the equipment and reproducibility of results by an examiner. Precision error values can be expressed as coefficient of variation (CV), CV%, and root mean square-SD (RMS-SD). The International Society for Clinical Densitometry (ISCD) currently recommends using RMS-SD as the precision error value. When a 95% confidence interval is applied, the least significant change (LSC) value is calculated by multiplying the precision error value by 2.77. Exceeding the LSC value reflects a significant difference in measured bone density. Therefore, the LSC value of a bone density equipment is an essential factor for accurately determining a patient's bone density. Accordingly, we aimed to calculate the LSC value of a bone density meter (Lunar iDXA, GE) and compare it with the value recommended by the ISCD. We also assessed whether the value measured by the iDXA equipment was below the LSC value recommended by ISCD. Material and Methods: The bone densities of the lumbar spine and thighs of 30 participants were measured twice, and the LSC values were calculated using the precision calculation tool provided by the ISCD (http://www.iscd.org). To check the reproducibility of the measurement, patients were asked to completely dismount from the equipment after the first measurement; the patient was then repositioned before proceeding with the second measurement. Results: The LSC values derived using the CV% values recommended by the ISCD were 5.3% for the lumbar spine and 5.0% for the thigh. The LSC values measured using our bone density equipment were 2.47% for the lumbar spine and 1.61% for the thigh. The LSC value using RMS-SD was 0.031 g/cm² for the lumbar spine and 0.017 g/cm² for the thigh. Conclusion: that the findings confirm that the CV% value measured using our bone density meter and the LSC value using RMS-SD were maintained very stably. This can be helpful for obtaining accurate measurements during bone density follow-up examinations.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.43 no.2
• /
• pp.87-97
• /
• 2020

The purpose of this study is to suggest the characteristics of online shopping malls and find a way to establish a differentiated marketing Strategy for online shopping malls in China. This study investigated the effect on the loyalty by applying the perceived shopping value (Hedonic Value, Utilitarian Value) of consumers in online shopping malls. In addition, In order to grasp the factors affecting consumer loyalty in online shopping malls, the characteristics of online shopping malls are multidimensional, consisting of product characteristics, recommended quality, benefit services, and community services. In order to obtain the purpose of the study, a questionnaire was surveyed for chinese online shopping experience and the research model was verified through empirical analysis method. Statistical analysis program was used together with SPSS 24.0 and AMOSS 24.0. Looking at the results of the analysis, firstly, the recommended quality and benefit service of online shopping malls are positive for the perceived hedonic value of consumers. The product characteristics and community service were found to have no effect on the hedonic shopping value. Secondly, the product characteristics, recommended quality, benefit service, and community service of online shopping malls on the utilitrian value perceived by consumers were positively affected. Thirdly, the perceived hedonic value has a positive effect on loyalty. Finally, it was confirmed that perceived utilitrian value affects loyalty. Based on the results of this study, a differentiated marketing strategy was established for existing chinese online shopping mall operators and potential new operators as well.

• Journal of Smart Tourism
• /
• v.2 no.4
• /
• pp.35-43
• /
• 2022

Tourism businesses use chat services to provide immediate customer support and to help users navigate within a website, but there are more outcomes of this interaction that should be examined. The current study aimed to discover if the online travel chat service quality and information value of the online travel chat service lead to user satisfaction with the service and visit intention to a recommended destination by Korea Tourism Organization's 1330 Live Chat. The results indicate that information value (functional and innovation) and online travel chat service quality (reliability, assurance, and security) lead to satisfaction with the live chat service and visit intention to a recommended destination. The results can benefit practitioners who want to expand and improve their customer service interaction and recommendations, and to scholars who study the relationship between customer services in tourism recommendation and sales context.

• The Journal of the Petrological Society of Korea
• /
• v.14 no.4 s.42
• /
• pp.237-250
• /
• 2005

In order to clarify the effect of standard rock material in the chemical analysis of rare earth element abundance with ICP-MS, we measured rare earth element abundance of KIGAM granite standard rock material (KG-1), USGS granite standard rock material (G-2), GSJ granite standard rock materials (JG-1a and JG-2). In REE analysis, we used conventional calibration standard solutions, KG-1, JG-1a, JG-2 and G-2 as standard material, respectively. Chondrite-normalized LREE patterns of low granite standard material correspond well each other in the recommended value and the estimated value regardless of a kind of standard rock. However, the HREE patterns of the estimated value based on G-2 or JG-2 and the recommended value are different from each other. Such difference may be due to the wrong recommended value or a specific geochemical properly of the standard rock material itself, The chondrite-normalized REE patterns of four standard rock materials estimated on the basis of KG-1 or JG-1 a show little deviation compared to the those of the recommended values. This suggests that KG-1 and JG-1a may be a optimum standard material for granitoids.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.1067-1071
• /
• 2004

In this paper, the characteristic of the regenerative pump is reviewed by the measurement and the analysis. The dominant noise sources are harmonic components of the rotating impeller frequency. The acoustic characteristics and the noise source position at the dump are identified. In order to reduce the high-level peak noise, the interior flow of the pump chamber is analyzed by CFD (Computational Fluid Dynamics). Acoustic pressure is calculated with Ffowscs Williams and Hawkings equation. As the result of the analysis new design of the pump chamber is recommended. The recommended pump is compared with original pump by evaluating the RMS value of a interior static pressure and the sound pressure level. The new pump chamber recommended by analysis results is proved by a process of the measurement. The overall SPL of a recommended pump is reduced about 3 dBA.

• Journal of Nutrition and Health
• /
• v.20 no.6
• /
• pp.395-404
• /
• 1987

A nutritional quality and rancidity of marketed korean traditional foods were assessed. That is, basic chemical analysis were done in Galbi-tang, Sullung-tang, Pibimbap, Pulkogi and Naeng Myon. Ca and P for the Galbi-tang and Sulung-tang and vitamin C for the Pibimbap were analyzed. Chemical analysis were done in Gangjung 4, Sanja 1, Parksan 6, Yoomilkwa, 4 out of korean traditional cookies. Amounts of energy and protein in Galbi -tang and protein and Ca in Sullung -tang are more than the recommended allowance at ta meal. Amounts of Ca in Galbi-tang and energy in SUllung-tang are less than the recommended . The amounts of energy and protein in Pibimbap, Pullkigi and Naeng Myon Except protein in Pullkogi are short of the recommended at a meal. And amounts of vitamin C in Pibimbap are short of the recommended, too. The content of carbohydrate in Korean traditional cookies is the highest one comparing to others. Contents of crude fat in Gangjung Parksan and Dasik which are made up of sesame, black sesame and pine nuts are higher than that of other Korean traditional cookies. Acid value and peroxide value in all Gangjung, Yoomilkwan and Sanja except the peroxide value in one Sanja product, are not in the excess of standard of peroxide value and acid value. The standard are 600meq/kg and 3 for peroxide value and acid value respectively in oil treated foods.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.29 no.1
• /
• pp.13-20
• /
• 2019

Objective: This study was performed to propose a domestic occupational exposure limit(OEL) following a health hazard assessment, calculation of a non-carcinogenicity reference concentration worker($RfC_{worker}$) value, and examination of international agencies' exposure limits. It also recommends legal management within the Occupational Safety and Health Act for PHMG-Phosphate(CAS No. 89697-78-9), It is a humidifier disinfectant that generated many lung injuries. Methods: We have investigated the recommendation or guidelines of foreign OEL for PHMG-Phosphate and the actual state of legal management in Korea. To examine the procedures and methods for recommendation OEL. Toxicological hazard and health hazard classifications were examined and a non-carcinogenicity $RfC_{worker}$ value was calculated for PHMG-Phosphate. An OEL and the necessity of legal management were recommended as well. Results and Conclusions: The OEL for PHMG-Phosphate is recommended to be $0.01mg/m^3$. The recommended OEL is close to 10 times the RfCworker value of $0.000833mg/m^3$ calculated from the chemical dose-response hazard assessment, which is a 2017 study. The CMIT/MIT(3:1) mixture, which was a social issue as a humidifier disinfectant substance, was also exposed to the same ratio in March 2018, establish the OEL. It is recommended to establish OEL for PHMG-Phosphate to prevent worker health hazards and for chemical safety management.

• Journal of Ocean Engineering and Technology
• /
• v.33 no.3
• /
• pp.222-228
• /
• 2019

An extreme value analysis (EVA) is essential to obtain a design value for highly nonlinear variables such as long-term environmental data for wind and waves, and slamming or sloshing impact pressures. According to the extreme value theory (EVT), the extreme value distribution is derived by multiplying the initial cumulative distribution functions for independent and identically distributed (IID) random variables. However, in the position mooring of DNVGL, the sampled global maxima of the mooring line tension are assumed to be IID stochastic variables without checking their independence. The ITTC Recommended Procedures and Guidelines for Sloshing Model Tests never deal with the independence of the sampling data. Hence, a design value estimated without the IID check would be under- or over-estimated because of considering observations far away from a Weibull or generalized Pareto distribution (GPD) as outliers. In this study, the IID sampling data are first checked in an EVA. With no IID random variables, an automatic resampling scheme is recommended using the block maxima approach for a generalized extreme value (GEV) distribution and peaks-over-threshold (POT) approach for a GPD. A partial autocorrelation function (PACF) is used to check the IID variables. In this study, only one 5 h sample of sloshing test results was used for a feasibility study of the resampling IID variables approach. Based on this study, the resampling IID variables may reduce the number of outliers, and the statistically more appropriate design value could be achieved with independent samples.

• Journal of Korea Multimedia Society
• /
• v.23 no.12
• /
• pp.1565-1575
• /
• 2020

This study examines the game balance of the MOBA game genre, which was selected as a model item for the Asian Games. The "bird-eye view" was used for a more efficient representation of 3D modeling. Based on that, statistical analysis was conducted to present appropriate game camera settings and camera balance to match the competitive structure of the MOBA game. A review of the game camera settings reveals that 64° to 70° is the angle that minimizes the difference in vision between the two-player teams the most. Through a one-way ANOVA analysis, we found that the user ranking level and SVB value are closely related. Therefore, the factor of the regression equation using the SVB value must have a user ranking level. As a result of the optimized camera focus analysis of , the camera setting methods were classified into 3 types. For main action games, the recommended camera angle is 64°~66°, and the recommended camera focus is 11.2 mm~19.3 mm. For action and strategy games, the camera angle is 66°~68°, camera focus - 19.3 mm~27.3 mm. And lastly, for the main strategy game, the recommended camera angle is 68°~70°, and the camera focus is 27.3 mm~35.3 mm.