• Journal of Bio-Environment Control
• /
• v.14 no.1
• /
• pp.63-67
• /
• 2005

This study was conducted to investigate the effect of remained leaf number on leaf, stem and root growth of leaf lettuce (Lactuca sativa L. var. Chungchima). Plants were grown hydroponically in $0.45\pm0.15\pm3.0m$ growth channels using a recirculating DFT (Deep Flow Technique) system. The growth response to remained leaf number was evident in leaf and stem than root of leaf lettuce. Leaf fresh weight increased and leaf quality was lowered with increasing of remained leaf number. Results indicate that 4 to 6 leaves could be optimum remained leaf number of hydroponically grown leaf lettuce.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.49 no.2
• /
• pp.161-167
• /
• 2016

The effects of fermented fecal solid diets on the growth of the sea cucumber Apostichopus japonicus was investigated in a recirculating aquaculture system (RAS) during a 90-day experiment at 16.5-17.5℃, 32±0.5 psu salinity, pH 7.9-8.2, and 5.2-7.1 mg/L dissolved oxygen. The aim was to determine the feasibility of RAS fecal solid waste as a renewable feed for A. japonicus. In this study, unfermented fecal solid (UF), fermented fecal solid (FF), and commercial feed (CF) diets were used. The results showed that the growth rate did not differ significantly (P>0.05) between A. japonicus fed FF and CF; however, the growth rates of A. japonicus fed FF and CF were ~50% higher than that of those fed UF. Thus, utilization of fecal solid by A. japonicus may overcome the problem regarding accumulation of RAS waste. Use of a fermentation process would improve utilization of fecal solid as a renewable food source for A. japonicus.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.49 no.2
• /
• pp.168-175
• /
• 2016

We conducted a 90-day feeding experiment to evaluate the growth and energy budget of the sea cucumber Apostichopus japonicus. Sea cucumbers with a mean initial wet body weight of 3.03±0.06 g were fed one of the following three diets: an eel fecal solid diet, rainbow trout fecal solid diet, or a commercial diet at a water temperature of 17±1℃ and salinity of 32±1 psu. The results suggested that the diets affected the final body weight, specific growth rate (SGR), food ingestion, feces production ratio, and hence the growth and energy budget of the sea cucumbers. Sea cucumbers fed the eel and rainbow trout fecal solid diets showed poorer energy absorption, assimilation, and growth than those fed the commercial diet. The sea cucumbers fed the commercial diet had a significantly higher SGR and proportion of energy used for growth than those fed the other two diets. Sea cucumbers fed the rainbow trout fecal solid diet showed a comparatively higher ingestion rate and feces production ratio than those fed the commercial diet. The eel and rainbow trout fecal solid diets, therefore, were not suitable for sea cucumbers in intensive cultivation. Our findings will facilitate further development of more appropriate diets for culture of sea cucumber.

• Journal of Advanced Marine Engineering and Technology
• /
• v.34 no.4
• /
• pp.485-490
• /
• 2010

MILD (Moderate and Intense Low Oxygen Dilution) combustion is a technique which is able to reduce NOx formation and to uniform temperature distribution in the furnace by recirculating the exhaust gas to the fresh air and fuel. This study focuses on finding optimal condition of MILD combustor by changing equivalence ratio with fuel and air flow. The present experiment employs six thermocouple sensors in the furnace, and two concentration probes of NOx and CO at the exhaust exit pipe respectively. The MILD combustion phenomena have been observed at the condition of equivalent ratios of 0.71~0.73, and the temperature uniformity, NOx and CO concentration are also examined at the MILD combustion condition.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.31 no.1
• /
• pp.31-38
• /
• 1999

Adsorption of polymeric flocculants and dry strength agents onto the surface of papermaking fibers is critical for their effective utilization since the polymeric substances not adsorbed on fibers or fines keep recirculating in the papermaking system to cause various operational difficulties and loss of raw materials. Problems associated with the unadsorbed polymeric substances generate great attention because unprecedent interests in utilization of recycled papers and papermaking system closure. In this study, to understand the effects of recycling on the adsorption propensity of cationic polyacryamide (PAM) dry strength resin onto hardwood bleached kraft pulp fibers and fines a systematic approach was followed. Never dried bleached hardwood kraft pulp was recycled in two different ways. In mode one recycling experiment never dried pulp was beaten then recycled three times by employing simple drying and disintegrating steps. In mode two recycling experiment beating of the recycled pulp was carried out after each recycling step. Adsorption of cationic PAM on fibers and fines was evaluated employing Kjeldahl nitrogen analysis method. The influence of recycling on water retention value, carboxyl content, sheet density and tensile strength of the pulp was examined. As the number of recycling increased, water retention value of the fiber was reduced due to hornification and this in turn caused a decrease in adsorption of cationic PAM. On the other hand, the carboxyl content of the recycled fibers increased because of the oxidation of fibers occurred during drying, and this caused an increase in adsorption of cationic PAM. Because of these two opposing factors the adsorption of the cationic PAM on the recycled fibers decreased and then increased slightly at third recycling step. Increase of PAM adsorption, however, did not provide did not provide and strength improvement for the recycled pulp fibers indicating greater influence of the honification on interfiber bonding.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.7 no.4
• /
• pp.187-194
• /
• 1974

When rearing fish at recirculating filter systems, some pesticides are often used for controling various fish diseases. In this case, the pesticides are usually applied after stopping the filteration, from a view point of affecting the filtering ability of oxidation and decomposition by killing the decomposing bacteria in the filter system. Therefore, a great inconvenience is usually net. The authors carried out a series of experiments, and the influence of 3 kinds of treatments of pesticides, formalin 33 ppm+matachite green 0.15 ppm, dipterex 0.25 ppm, and furanace 0.1 ppm, to the filtering ability expressed as the consumption rate of dissolved oxygen and depletion of ammonia-nitrogen during the passing time through the filter layer was investigated, and it was found out that these pesticides with above mentioned concentrations which is normally used for controling several kinds of diseases and parasites during the time of eel culture, did not affect the filtering ability. Consequently, it can be said that these pesticides with above mentioned concentrations can he used without stopping filteration.

• Journal of Acupuncture Research
• /
• v.25 no.6
• /
• pp.163-173
• /
• 2008

Objectives : The purpose of this study is to see the effect of beevenom on inhibition of Alopecia Universalis. Methods : Beevenom was injected subcutaneously through the borderline of head scalp alopecia starting and, also, region feeling stiff tension. Results : Hair falling off seized and scalp tension was vanished. Conclusions : Beevenom seemed to inhibit the progression of Alopecia by recirculating the blood flow as stiff tension over head was solved and anti-inflammatory effect of beevenom seizing inflammation on the scalp. Further evaluation with big sample size control study would be required to manifest the rationale and effectness of Beevenom over Alopecia Universalis.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.9
• /
• pp.623-629
• /
• 2017

Flow structure and mixing characteristics in a micro combustor with a multi-hole baffle were numerically studied using the Reynolds stress model. The multi-hole baffle has geometrical features to produce multiple three-dimensional vortices inside combustion chamber. When the thickness of the baffle's geometrical factors changes, variations of vortical structures occur variously. Among these vortices, the vortex generated from the fuel stream exerts a critical influence on the mixing enhancement. The three-dimensional vortical structure, in its development state, was strongly dependent on the baffle thickness. In particular, as the baffle thickness decreases to values less than the diameter of the fuel hole, the jet stream in baffle holes changes from the parabolic to saddleback profile type. The sizes of recirculation zones inside combustion chamber and the mixing state were closely affected by the structure of the jet streams.

• Journal of Mechanical Science and Technology
• /
• v.19 no.5
• /
• pp.1158-1168
• /
• 2005

A shunt from the left ventricle to the left anterior descending artery is being developed for coronary artery occlusive disease, in which the shunt or conduit connects the the left ventricle (LV) with the diseased artery directly at a point distal to the obstruction. To aid in assessing and optimizing its benefit, a computational model of the cardiovascular system was developed and used to explore various design conditions. Computational fluid dynamic analysis for the shunt hemodynamics was also done using a commercial finite element package. Simulation results indicate that in complete left anterior descending artery (LAD) occlusion, flow can be returned to approximately 65% of normal, if the conduit resistance is equal for forward and reverse flow. The net coronary flow can increase to 80% when the backflow resistance is infinite. The increases in flow rate produced by asymmetric flow resistance are enhanced considerably for a partial LAD obstruction, since the primary effect of resistance asymmetry is to prevent leakage back into the ventricle during diastole. Increased arterial compliance has little effect on net flow with a symmetric shunt, but considerably augments it when the resistance is asymmetric. The computational results suggest that an LV-LAD conduit will be beneficial when the resistance due to artery stenosis exceeds 27 PRU, if the resistance is symmetric. Fluid dynamic simulations for the shunt flow show that a recirculating region generated near the junction of the coronary artery with the bypass shunt. The secondary flow is induced at the cutting plane perpendicular to the axis direction and it is in the attenuated of coronary artery.

• Fire Science and Engineering
• /
• v.27 no.3
• /
• pp.20-29
• /
• 2013

To investigate numerically the effects of geometry and location of vertical opening on the thermal and chemical fire characteristics in full-scale under-ventilated compartment fires, the ventilation factor ($A\sqrt{h}$) to estimate a theoretical maximum inflow of ambient air and the mass loss rate in a heptane pool fire were fixed for all cases. It was shown that variations in door geometry affected significantly the change in thermal and chemical characteristics inside the compartment. Variations in window location resulted in the complex change in additional fire characteristics including the fire duration time and recirculating flow structure. These results were analyzed in details by the multi-dimensional flow and fire characteristics including the vent flow and fuel/air mixing phenomena.