• Journal of The Korean Astronomical Society
• /
• v.29 no.spc1
• /
• pp.173-174
• /
• 1996

We have mapped $17 deg^2$ region toward Galactic anticenter in $^{12}CO$ J = 1 - 0 using the 3 mm SIS receiver on the 14 m telescope at Taeduk Radio Astronomy Observatory (TRAO). The region mapped in this paper is the first target of the Galactic AntiCenter CO Survey Project (GACCOS) and was selected comparing with IRAS Sky Survey Atlas (ISSA) images at 100${\mu}m$. Molecular emission of the target area is found to be very extended and is well matching with the FIR emission boundary. There are several pieces of clouds, and as some of spectra show several peaks, there seem to be several clouds overlapped in some directions. The Velocity of Local Standard of Rest ($V_{LSR}$) of the CO emission of the mapped region ranges from -20 to +10 km/s. It is also found that the two cloudlets located around I = $180^{\circ}$ have $V_{LSR}$ = -20 km/s, which is very abnormal. The peak antenna temperature of 13 K arises near the H II Region S241.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.4
• /
• pp.396-405
• /
• 2009

This paper describes playback downlink and telecommand uplink channel design performed for a transportable small-sized KOMPSAT(Korea Multi-Purpose Satellite) ground station. As a result of downlink channel design, required receiving performance was calculated from the threshold signal-to-noise ratio of playback signal and it was revealed that this performance can be guaranteed in 1.5 m ground station with 6.5 dB/K of G/T. For the uplink channel design, 40 dBW of EIRP was derived from the threshold signal-to-noise ratio of telecommand signal received at on-board receiver. The implemented small-sized ground station based on design was evaluated to be fully acceptable for KOMPSAT TT&C(Telemetry, Tracking and Command) system and playback downlink design without taking account of additional 3 dB system link margin was shown to be effective because it had provided constantly initial channel performance without any remarkable degradation over several years of tests with KOMPSAT and KOMPSAT-2, for both uplink and playback downlink in the elevation angle above $10^{\circ}$.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.3
• /
• pp.277-283
• /
• 2016

In this paper, a system of self-interference signal cancelation for in-band full duplex has been implemented and tested in RF/analog region. The system performance has been evaluated with NI5791 platform and NI Flex RIO. Due to the low power level of the NI5791, the RF signal is amplified by SKYWORKS SE2565T power amplifier. A circulator is used to feed the antenna both the transmitter and receiver. The RF FIR filter is designed by twelve delay taps in two different groups, and the interval between each delay tap is designed to have 100 ps. The amplified signal is distributed to antenna and the FIR filter by use of a 10 dB directional coupler. The tap coefficients of the RF FIR filter are tuned to estimate the self-interference signal coming from antenna reflection and the leakage of the circulator, and the self-interference signal is subtracted. The system is test with 802.11a/g 20 MHz OFMD at 2.56 GHz, and the output power of the amplifier of 0 dBm. The self-interference signal is canceled out by 53 dB.

• Journal of Communications and Networks
• /
• v.7 no.2
• /
• pp.157-170
• /
• 2005

The combination of multiple antennas and multi-carrier code division multiple-access (MC-CDMA) is a strong candidate for the downlink of the next generation mobile communications. The study of such systems in scenarios that model real-life trans-missions is an additional step towards an optimized achievement. We consider a realistic MIMO channel with two or four transmit antennas and up to two receive antennas, and channel state information (CSI) mismatches. Depending on the mobile terminal (MT) class, its number of antennas or complexity allowed, different data-rates are proposed with turbo-coding and asymptotic spectral efficiencies from 1 to 4.5 bit/s/Hz, using three algorithms developed within the European IST-MATRICE project. These algorithms can be classified according to the degree of CSI at base-station (BS): i) Transmit space-frequency prefiltering based on constrained zero-forcing algorithm with complete CSI at BS; ii) transmit beamforming based on spatial correlation matrix estimation from partial CSI at BS; iii) orthogonal space-time block coding based on Alamouti scheme without CSI at BS. All presented schemes require a reasonable complexity at MT, and are compatible with a single-antenna receiver. A choice between these algorithms is proposed in order to significantly improve the performance of MC-CDMA and to cover the different environments considered for the next generation cellular systems. For beyond-3G, we propose prefiltering for indoor and pedestrian microcell environments, beamforming for suburban macrocells including high-speed train, and space-time coding for urban conditions with moderate to high speeds.

• Investigative Magnetic Resonance Imaging
• /
• v.11 no.1
• /
• pp.20-26
• /
• 2007

Purpose : The purpose of the present study was to develop and optimize solenoid coil for animal- model in 3 T MRI system and investigate and compare with the birdcage coil concerning the image quality with the various parameters such as SNR and Q-factor. Materials and Methods : Solenoid coil for animal-model was made on the acryl structure (diameter 4 cm, length 10 cm) 3 times-winding cooper tape of width 2 cm, thickness 0.05 cm and length 10 cm with 2 cm interval between winded tapes. Capacitors from 2 pF to 100 pF were used, and the solenoid coil was designed for receiver only coil. Results : SNR of the developed solenoid was 985 in CuSO4 0.7 g/L and 995 in rat experiment. Q-factor was 84-89 in unloaded condition and 203-206 in loaded condition. Conclusion : The resolution of the image obtained from solenoid was relatively higher than that of the conventional birdcage coil. In addition, the homogeneity of RF field by coil simulation was significantly excellent. The present study demonstrated that the solenoid coil could be useful to obtain small animal images with better contrast, resolution, visibility than images from birdcage.

• Journal of the Korean Solar Energy Society
• /
• v.21 no.4
• /
• pp.29-35
• /
• 2001

The chemical heat storage as the one way of utilization for high temperature solar energy was considered. The stram reforming reaction of methane was chosen for endothermic reaction. The reactor was made of stainless steel tube and it's dimension was 0.635 cm I.D. and 30 cm long, coiled tube because of the geometry requirement of solar receiver The effects of space velocity and reactants mole ratio on the methane conversion and CO selectivity were examined. From the experimental results, the optimum steam/methane mole ratio was determined.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.8
• /
• pp.52-59
• /
• 2007

In this paper, we analyzed and measured implant isolation characteristics for a 1.25 Gbps monolithic integrated hi-directional (M-BiDi) optoelectronic system-on-a-chip, which is a key component to constitute gigabit passive optical networks (PONs) for a fiber-to-the-home (FTTH). Also, we derived an equivalent circuit of the implant structure under various DC bias conditions. The 1.25 Gbps M-BiDi transmit-receive SoC consists of a laser diode with a monitor photodiode as a transmitter and a digital photodiode as a digital data receiver on the same InP wafer According to IEEE 802.3ah and ITU-T G.983.3 standards, a receiver sensitivity of the digital receiver has to satisfy under -24 dBm @ BER=10-12. Therefore, the electrical crosstalk levels have to maintain less than -86 dB from DC to 3 GHz. From analysed and measured results of the implant structure, the M-BiDi SoC with the implant area of 20 mm width and more than 200 mm distance between the laser diode and monitor photodiode, and between the monitor photodiode and digital photodiode, satisfies the electrical crosstalk level. These implant characteristics can be used for the design and fabrication of an optoelectronic SoC design, and expended to a mixed-mode SoC field.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.12
• /
• pp.3056-3068
• /
• 1996

This papre presents the RDM algorithm for composition of bit. After this, we propose a digital signature scheme for facsimile document using RDM algorithm. We modify the even-odd feature in distance of changing pel between coding line and multiple reference line which have been scanned before, and run-length in coding line. The time to take in signature is reduced by spreading of signature. Non-repudiation in origin, the 3rd condition of digital signature is realized by proposed digital signature scheme. The transmitter embeds the signature secretly and tensfers it, and the receiver makes a check of any forgery on the signature and the document. This scheme is compatible with the ITU-T.4(G3 or G4 facsimile standard). The total amount of data transmitted and the quality of image are about the same to that of the original document, thus a third party does not notics signature embeded on the document.

• Journal of KIISE:Computing Practices and Letters
• /
• v.14 no.3
• /
• pp.261-265
• /
• 2008

As increasing the user of VoIP service using ITSP(Internet Telephony Service Provider), the VoIP spam becomes a big problem. The spam used in the existing public telephone is detected by using the pattern inspection of call behavior because it is difficult to filter contents for the characteristic of real-time voice communication. However there is a false-positive problem. The threat on spam remains where spam with low threshold can't be detected or users share one number. In this paper, we propose anti-spam for VoIP based on luring test. The proposed method gives a user luring test and he/she can connect to a receiver if passing turing test. A ticket is given to a user that pass luring test and it reduces overhead of luring test in re-dial. The proposed method is implemented on ASUS WL-500G wireless router and Asterisk IP-PBX. Experimental results show the effectiveness of the proposed method.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.7 no.2
• /
• pp.55-72
• /
• 1997

This paper presents a digital signature scheme for facsimile document which directly embeds a signature onto the document. We use multiple reference lines which have been scanned just before and modify each distance of changing pels both on the reference line specified by key and on the coding line with a single bit of the signature data. The time to take in signature is reduced by spreading of signature. Non-repudiation in origin, the 3rd condition of digital signature is realized by proposed digital signature scheme. The transmitter embeds the signature secretly and transfers it, and the receiver makes a check of any forgery on the signature and the document. This scheme is compatible with the ITU-T.4(CCITT G3 or G4 facsimile standards). The total amount of data transmitted and the image quality are about the same to that of the original document, and thus a third party notices that no signature is embedded on the document.