• 한국화재소방학회논문지
• /
• 제26권5호
• /
• pp.1-7
• /
• 2012

현재 국내에서 수계소화설비의 배관부속류와 밸브류의 마찰손실 계산에 사용되고 있는 등가길이표에 대하여 비교 연구하였다. 3가지 종류의 등가길이표가 주로 사용되고 있으며 안타깝게도, 가장 광범위하게 사용되고 있는 등가길이표에 대한 근거를 찾을 수 없었다. 세 개의 등가길이표를 비교했을 때 각 등가길이표간 동일 항목의 등가길이에 있어 최대 2.4배까지 차이가 있었다. 많은 해외 Project들을 수행하고 있는 국제화시대에 부응할 수 있도록 공학적으로 합리적이며 단일화된 등가길이표를 사용하여야 한다. 이에 합리적인 등가길이표를 제시한다.

• 동의생리병리학회지
• /
• 제24권5호
• /
• pp.790-795
• /
• 2010

Sasang Constitution Medicine(SCM)'s researches have been developed in many ways, especially Herbal medicine prescriptions and diagnosis. But there are no acceptable acupuncture theory for the Sasang Constitution. So We have tried to find the way for identifying each Sasang Constitution's acupuncture point on more reasonable methods. We studied that SCM acupuncture based on collecting Books of "Shanghanlun(傷寒論)", or Six-meridian pattern identification's acupuncture prescription. Selected books are "The Acupuncture and Moxibustion(침구학)", "Zhonghua Zhenjiuxue(中華鍼灸學)", "Zhenjiuxinchuan(鍼灸心傳)", "Shanghanlun Zhenjiupeixuexuanzhu(傷寒論鍼灸配穴選注)". So-eumin uses Conception Vessel's acupuncture points most frequently. And So-yangin and Tae-eumin use Bladder meridian and Stomach meridian's acupuncture points most. Moxibustion is used many times for So-eumin, especially at three Yin-Symptoms(三陰病). Orders for using frequencies of three Sasang constitutions' acupuncture points are: So-eumin uses ST36 CV12 CV4 most, So-yangin uses PC6 ST36 LI4 most, Tae-eumin uses ST36 LU7 CV12 most. Acupuncture for Sasang constitutions has been developed for many ways, but there are no generally acceptable theory. So we need to hold a committee for SCM and acupuncture specialist to establish acceptable and reasonable SCM acupuncture theory.

• Progress in Superconductivity
• /
• 제11권1호
• /
• pp.8-12
• /
• 2009

We investigated the effects of the irradiation of light-ions on the superconducting $MgB_2$ thin films fabricated by using HPCVD. Deuterium and helium ions were irradiated on $MgB_2$ thin films by various doses, from $1{\times}10^{10}cm^{-2}\;to\;8{\times}10^{15}cm^{-2}$. During these experiments some reasonable results and unpredictable results have been obtained. The reasonable results are that the peak of the reduced maximum pinning force shifts by increasing the pinning sites in $MgB_2$ films and the slightly change of critical current density of films. We obtained some unusual results, which are the increasing of the transition temperature and the change of residual resistance ratio. Among the data of deuterium and helium ion irradiation experiments, the results of helium ion irradiation have most notable points so we will discuss mainly about helium irradiation experiments.

• 한국농공학회지
• /
• 제34권4호
• /
• pp.39-47
• /
• 1992

Derivation of reasonable design low flows was attempted by comparative analysis of design low flows was derived by Power and SMEMAX transformations for the normalizations of skewed distribution and by Type m extremal distribution presented in the first report of this study with annual low flows in the five watersheds of main river basins in Korea. The results were anslyzed and summarized as follows. 1.Basic statistics of annual low flows for the selected watersheds were calculated by using Power and SMEMAX transformations. 2.Power thansformation has found to be the best for the normalization of skewed distribution among others including log, square root and SMEMAX transformations. 3.Design low flows for the selected watersheds were derived by the Power and SMEMAX transformations. 4.Judging by the relative suitabilities of the Type III extremal distribution, Power and SMEMAX transformation, it was found that design low flows of all methods are closer to the observed data within 10 years of the return period and those of Power transformation can be acknowledzed as a reasonable one among others from the viewpoint of the median between values of Type m extremal distribution and SMEMAX transformation in addition to closing the observed than others over 10 years of the return period.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.477-482
• /
• 2001

This paper is to study the effect of longitudinal reinforcement ratios and axial deformation on the frame analysis in reinforced concrete(RC) columns and to investigate the effect of confined concrete core, the length-width ratio and longitudinal steel ratios on frame analysis in Concrete-Filled steel Tubular(CFT) columns. An equation if derived to evaluate the modulus of elasticity for core concrete. The 34 reference data have been collected for the purpose and are processed by the mean of a multiple regression analysis technique. The equation and longitudinal reinforcement ratios was applied to RC columns for structural analysis. Then, the difference of beam moment was identified. In general, the results of analysis was indicated reasonable differences in beam moment, in case of longitudinal reinforcement ratios applied to RC columns when compared with the plain concrete columns. In CFT columns the equation was also applied in order to the effect of confined concrete core on structural analysis. Beam moment was increased as volumetric ratio of lateral steel was decreased. The effect of longitudinal steel ratios was investigated in CFT columns and was confirmed beam moment variety. The result was appeared reasonable difference in beam moment as longitudinal steel was increased.

• 한국해양공학회지
• /
• 제34권3호
• /
• pp.155-166
• /
• 2020

Ductile fracture prediction is critical for the reasonable damage extent assessment of ships and offshore structures subjected to accidental loads, such as ship collisions and groundings. A fracture model combining the Hosford-Coulomb ductile fracture model with the domain of solid-to-shell equivalence model (HC-SDDE), was used in fracture simulations based on shell elements for the punching fracture experiments of unstiffened and stiffened panels. The flow stress and ductile fracture characteristics of JIS G3131 SPHC steel were identified through tension tests for flat bar, notched tension bar, central hole tension bar, plane strain tension bar, and pure shear bar specimens. Punching fracture tests for unstiffened and stiffened panels are conducted to validate the presented HC-DSSE model. The calibrated fracture model is implemented in a user-defined material subroutine. The force-indentation curves and final damage extents obtained from the simulations are compared with experimental results. The HC-DSSE fracture model provides reasonable estimations in terms of force-indentation paths and residual damage extents.

• 한국멀티미디어학회논문지
• /
• 제8권12호
• /
• pp.1589-1596
• /
• 2005

The imprecise real-time system provides flexibility in scheduling time-critical tasks. Most scheduling problems of satisfying both 0/1 constraint and timing constraints, while the total error is minimized, are NP complete when the optional tasks have arbitrary processing times. Liu suggested a reasonable strategy of scheduling tasks with the 0/1 constraint on uniprocessors for minimizing the total error. Song et al suggested a reasonable strategy of scheduling tasks with the 0/1 constraint on multiprocessors for minimizing the total error. But, these algorithms are all off-line algorithms. On the other hand, in the case of on line scheduling, Shih and Liu proposed the NORA algorithm which can find a schedule with the minimum total error for a task system consisting solely of on-line tasks that are ready upon arrival. But, for the task system with 0/1 constraint, it has not been known whether the NORA algorithm can be optimal or not in the sense that it guarantees all mandatory tasks are completed by their deadlines and the total error is minimized. So, this paper suggests an optimal algorithm to search minimum total error for the imprecise on-line real-time task system with 0/1 constraint. Furthermore, the proposed algorithm has the same complexity, O(N log N), as the NORA algorithm, where N is the number of tasks.

• 한국안전학회지
• /
• 제21권3호
• /
• pp.67-72
• /
• 2006

This study is to investigate the related materials such as domestic law regulation, research paper, research report, and the other material, and to suggest suitable counter measures, to find out hazard degree for its works of workers and work place through direct survey, in order to determine risk score of each hazardous work which is designated by the Government, without consideration of labour's consciousness against risk level at a site. Therefore, a new questionnaire survey related to the decision of risk level are made and distributed to find out what risk level each worker recognizes. Also, the authors tried to approach reasonable conclusions after discussing reasonability of qualification standard and improving ideas of worker at hazardous work places with worker, faculty member, H&S manager, labour union. And the results show hazard degrees by each work kind of the above: 3.75 for working with machinery, 3.7 for steel structure, 3.5 for operation of tower crane, 3.51 for retaining wall, 3.85 for form work, 3.46 for scaffolding are obtained. This quantified risk can be applied to establishing a reasonable system to keep safe against hazardous works.

• 한국군사과학기술학회지
• /
• 제18권5호
• /
• pp.558-565
• /
• 2015

The current methods, such as Binomial Probability Distribution or T-test, to calculate the number of samples of Precise Guided Missiles(PGMs) for test and evaluation are statistically problematic to make reasonable decisions thus use the budget efficiently. Also, the method to verify an accuracy rate of the PGMs using these old methods seems to be lack of objectiveness. This paper presents an effective, efficient solution adapted from the clinical medicine testing method of healthcare industry research, which may overcome our problems. This method considers and addresses both manufacturers' and consumers' risk simultaneously. By taking into account the weapon system project characteristics which take a relatively longer time and require higher-level budget, this approach also suggests a reasonable and feasible method to determine the amount of samples of the PGMs and making a criterion to verify an accuracy rate of the missiles that are required to test. Thus, this method is expected to contribute to acquisition and operations of high-reliability PGMs by MND and its field-users.

• 자원리싸이클링
• /
• 제10권1호
• /
• pp.7-15
• /
• 2001

본 연구에서는 여러 가지 건설 부산물 중에서 단순히 폐기되거나 매립에 의존하고 있는 폐콘크리트를 대상으로 건설공사에 재이용하기 위한 기술 즉, 폐콘크리트의 콘크리트용 골재(재생골재)로서의 재이용과 콘크리트 구조용 재료로써의 재사용을 위한 기술적인 방향을 제시하고 실험적 자료를 구축하고자 하였다 실험결과, 안전을 고려하여 재생골재 대체율은 30%이하, 최대철근비를 균형 철근비의 70%이하, 깊은 보의 기준은 전단 스팬비 2.0이하로 보는 것이 타당하고, 계수전단강도의 예측에는 Zsutty식을 사용하는 것이 합리적이라고 판단된다.