• IEIE Transactions on Smart Processing and Computing
• /
• v.5 no.3
• /
• pp.193-198
• /
• 2016

Lane change is an important issue in microscopic traffic flow simulations and active safety. Overtaking and changing lanes are dangerous driving maneuvers. This approach presents a lane-changing system based on speed and a minimum gap between vehicles in a vehicular ad hoc network (VANET). This paper proposes a solution to ensure the safety of drivers while changing lanes on highways. Efficient routing protocols could play a crucial role in VANET applications, safeguarding both drivers and passengers, and thus, maintaining a safe on-road environment. This paper focuses on the development of an intelligent transportation system that provides timely, reliable information to drivers and the concerned authorities. A test bed is created for the techniques used in the proposed system, where analysis takes place in an on-board embedded system designed for vehicle navigation. The designed system was tested on a four-lane road in Neemrana, India. Successful simulations were conducted with real-time network parameters to maximize quality of service and performance using Simulation of Urban Mobility and Network Simulator 2 (NS-2). The system implementation, together with the findings, is presented in this paper. Illustrating the approach are results from simulation using NS-2.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.7
• /
• pp.701-708
• /
• 2009

The flight control law of developed flight control computer(DFLCC) is developed based on operation flight program of advanced trainer aircraft full scale development final configuration. The flight control law design is used common use development tool in GUI(Graphic User Interface) environment. The flight control law transformed to C-Code is reflected in OFP. The OFP is verified by the standardized verification process. But, before standardized verification process, we need preliminary verification process such as similarity of flight control law and reliability of developed HILS. Similarity of flight control law is verified by comparing the aircraft response of advanced trainer aircraft and those of the developed control law. Also, reliability of developed HILS is verified by comparing the aircraft response of HILS and Non-real time simulation result. This paper verifies similarity of developed control law and reliability of HILS environment as comparing aircraft response.

• Journal of Korean Society of Transportation
• /
• v.25 no.6
• /
• pp.7-18
• /
• 2007

There are few studies on air pollution due to vehicle emissions in spite of the importance of this field. Therefore, this study describes trends and suggests implications through analysis relating to existing emissions research. This study has been divided into three areas. The first part is about estimating vehicle emissions. In this part, the authors analyze limits in ways of calculating emissions in the existing macroscopic view and then suggest the development of a model for calculating emissions considering velocity and acceleration. These variables are a function of traffic and individual driving behavior in the microscopic view. The second part is about management techniques for reducing vehicle emissions. The traffic management techniques for reducing vehicle emissions should conform to regional characteristics. The final part is about traffic operation for reducing vehicle emissions. The authors suggest the development of a micro-simulator and then the development of strategies for traffic operation. It is necessary to design better models estimating emissions and then, using real time data, to make a monitoring system simulating emission rates. This study serves as a literature review to make a foundation for further research about emissions research for transportation engineering.

• KEPCO Journal on Electric Power and Energy
• /
• v.2 no.4
• /
• pp.549-556
• /
• 2016

CVR is a technique for reducing power consumption by reducing the voltage of the system and many demonstrations and studies have been conducted in the past. Recently, SCADA-based or AMI-based VVC have been developed and the CVR is used as an important operation mode. Using a variety of instruments, CVR determines the optimal VVC control references by closed loop control. In this paper, we implemented RTDS-MATLAB integrated simulation environment for development and verification of CVR control algorithm based on voltage measurement. The voltage control device of distribution system was modeled using RTDS and MATLAB has constructed a controller that can measure and control the voltage of the simulation system of RTDS. After the capacitor, which is a reactive power control device, flattens the voltage of the system, the control algorithm reduces the voltage of the system by tap control of the OLTC based on the flatten voltage. The proposed system was verified by simulations.

• Archives of Plastic Surgery
• /
• v.45 no.5
• /
• pp.395-402
• /
• 2018

Increased emphasis on competency-based learning modules and widespread departure from traditional models of Halstedian apprenticeship have made surgical simulation an increasingly appealing component of medical education. Surgical simulators are available in numerous modalities, including virtual, synthetic, animal, and non-living models. The ideal surgical simulator would facilitate the acquisition and refinement of surgical skills prior to clinical application, by mimicking the size, color, texture, recoil, and environment of the operating room. Simulation training has proven helpful for advancing specific surgical skills and techniques, aiding in early and late resident learning curves. In this review, the current applications and potential benefits of incorporating simulation-based surgical training into residency curriculum are explored in depth, specifically in the context of plastic surgery. Despite the prevalence of simulation-based training models, there is a paucity of research on integration into resident programs. Current curriculums emphasize the ability to identify anatomical landmarks and procedural steps through virtual simulation. Although transfer of these skills to the operating room is promising, careful attention must be paid to mastery versus memorization. In the authors' opinions, curriculums should involve step-wise employment of diverse models in different stages of training to assess milestones. To date, the simulation of tactile experience that is reminiscent of real-time clinical scenarios remains challenging, and a sophisticated model has yet to be established.

• Journal of Satellite, Information and Communications
• /
• v.12 no.4
• /
• pp.42-49
• /
• 2017

Delay- and Disruption-Tolerant Network (DTN) has been considered as a key technology to overcome main challenges in interplanetary communications such as an intermittent connectivity and high bit error rates. The lack of end-to-end connectivity between source and destination results in long and variable delays and data loss, hence the Internet Protocols cannot operate properly in such environments because it requires an end-to-end connectivity. The DTN, which utilizes 'store-and-forward' message passing scheme between nodes, can overcome the lack of end-to-end connectivity in Interplanetary Network (IPN). In this paper, DTN is applied to 3-hop relay IPN, where messages are transmitted from Earth ground station to Lunar lander through Earth satellite and Lunar orbiter. ONE simulator is used to reflect the real environment of IPN and an efficient resource management method are analyzed to guarantee the message delivery by optimizing a message TTL (Time to Live), buffer size and message fragmentation.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.3
• /
• pp.199-212
• /
• 2014

This paper describes an autonomous air combat guidance law using a Virtual Pursuit Point (VPP) in one-on-one close engagement for Unmanned Combat Aerial Vehicle (UCAV). The VPPs that consist of virtual lag and lead points are introduced to carry out tactical combat maneuvers. The VPPs are generated based on fighter's aerodynamic performance and Basic Fighter Maneuver (BFM)'s turn circle, total energy and weapon characteristics. The UCAV determines a single VPP and executes pursuit maneuvers based on a smoothing function which evaluates probabilities of the pursuit types for switching maneuvers with given combat states. The proposed law is demonstrated by high-fidelity real-time combat simulation using commercial fighter model and X-Plane simulator.

• Korean Journal of Computational Design and Engineering
• /
• v.17 no.5
• /
• pp.303-311
• /
• 2012

Laparoscopic surgery is a surgical procedure which uses long laparoscopic instruments through tiny holes in abdomen while watching images from a laparoscopic camera through umbilicus. Laparoscopic surgeries have many advantages rather than open surgeries, however it is hard to learn the surgical skills for laparoscopic surgery. Recently, some virtual simulation systems for laparoscopic surgery are developed to train novice surgeons or resident surgeons. In this study, we introduce the techniques that we developed for laparoscopic surgical training simulator for cholecystectomy (gallbladder removal), which is one of the most frequently performed by laparoscopic surgery. The techniques for cholecystectomy simulation include modeling of human organs (liver, gallbladder, bile ducts, etc.), real-time deformable body calculation, realistic 3D visualization of surgical scene, high-fidelity haptic rendering and haptic device technology, and so on. We propose each simulation technique for the laparoscopic cholecystectomy procedures such as identifying cystic duct and cystic artery to clamp and cut, dissecting connective tissues between the gallbladder and liver. In this paper, we describe the techniques and discuss about the results of the proposed cholecystectomy simulation for laparoscopic surgical training.

• Convergence Security Journal
• /
• v.14 no.7
• /
• pp.29-36
• /
• 2014

In this study, we design and develop a VLC test-bed system which has been recently issued and focused as good convergence technology in the world. We classify the developed system into transmission part including analog LED driver module, digital signal modulation module, and receiver part with light sensing module and signal demodulation module. Then we introduce important characteristics and components. We analyze some factors for each module. To validate the communication of the designed VLC system, we develop a VLC sender-receiver simulator which can control the dimming factor and flicker-free effect. From the developed system, we observed about 12Mbps of data transmission rate with 0.5m~1m of distance, without packet loss. We verified the real-time communication with multimedia streaming which can be considered as very high date rate. The developed system and technology will be useful for some converged data services like indoor positing, home appliances, and indoor parking system.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.9
• /
• pp.888-897
• /
• 2015

A flight capability to take a terrain following flight near the ground is required to reduce the probability that a fighter aircraft can be detected by foe's radar fence in the battlefield. The success rate for mission flight has increased by adopting TFS (Terrain Following System) to enable the modern advanced fighter to fly safely near the ground at the low altitude. This system has applied to the state-of-the-art fighter and bomber, such as B-1, F-111, F-16 E/F and F-15, since the research begins from 1960's. In this paper, the terrain following system and GCAS (Ground Collision Avoidance System) was developed, based on a digital database with UTAS's TERPRROM (TERrain PROfile Matching) equipment. This system calculates the relative location of the aircraft in the terrain database by using the aircraft status information provided by the radar altimeter and the INS (Inertial Navigation System), based on the digital terrain database loaded previously in the DTC (Data Transfer Cartridge), and figures out terrain features around. And, the system is a manual terrain following system which makes a steering command cue refer to flight path marker, on the HUD (Head Up Display), for vertical acceleration essential for terrain following flight and enables a pilot to follow it. The cue is based on the recognized terrain features and TCH (Target Clearance Height) set by a pilot in advance. The developed terrain following system was verified in the real-time pilot evaluation in FA-50 HQS (Handling Quality Simulator) environment.