• Science of Emotion and Sensibility
• /
• v.4 no.1
• /
• pp.1-5
• /
• 2001

The evaluation of mental workload is measured by subjective ratings, physiological signals. It takes long time to analysis the measured signals and is very tedious and time-consumming work. Therefore, to evaluate the affect of workload effectively, real-time measurement system is required. In this paper, real-time mental workload measurement system using cardiac autonomic indiced which reflect well the mental workload was developed and evaluated. Analyzed indices were HR, IBI, Lorentz plot, CSI, CVI, and LF/HF ratio of heart rate variability. The system was applied to evaluate the affect of arithmetic task and showed good results. This system was consisted of ECG amplifier, A/D converter, and personal computer, and algorithm was implemented using LabVIEW.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.33B no.12
• /
• pp.13-23
• /
• 1996

In tis paper we researched the implementation methodology and techniques for the high real-time responsive operating system of an ISDN PABX system. The operating system we developed takes a high role as a dedicated real-time operating system for PABX systems. It provides the functions and synchronization, interprocessor communication, interrupt processing, and data I/O processing. And also it provides lots of real-time processing functions for supproting various real-time applications. Finally, we evaluated the performance by measuring the best, the average, and the worst-case execution time of all functions implemented in this real-time operating system.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.6
• /
• pp.596-602
• /
• 2007

Recently, many ECUs(Electronic Control Units) have been used to enhance the vehicle safety, which leads to a distributed real-time control system. The distributed real-time control system requires to reduce the network delay for dependable real-time performance. There are two different paradigms by which a network protocol operates: event-triggered and time-triggered. This paper focuses on implementation of a time-triggered protocol. i.e. TTP/C(Time-Triggered Protocol/class C). This paper presents a design method of TTP control network and performance evaluation of distributed real-time control system using TTP protocol.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.16 no.3
• /
• pp.260-267
• /
• 2013

A combat system for navy's battleship is a system of systems who supports naval indigenous operations by integrating and inter-operating many different kind of weapon and non-weapon systems, which has characteristics of large-scale complex computing system. This paper considers a characteristics of naval combat system which has been developed by domestic technology and suggests a way to improve future naval combat system in terms of computing architecture by applying commercial real-time operating system technologies. This paper also provides an evaluation criteria for combat system adaptability of real-time operating systems.

• Journal of the Semiconductor & Display Technology
• /
• v.20 no.2
• /
• pp.131-136
• /
• 2021

EtherCAT is an Ethernet-based fieldbus system standardized in IEC 61158 and SEMI, and widely used in the fields of factory automation, semiconductor equipment and robotics. In this paper, a real-time EtherCAT master is implemented on Linux operating systems and its performances are evaluated. To enhance the real-time capability of mainline Linux kernel, Xenomai is applied as a real-time framework and an open source EtherCAT master stack, Simple Open EtherCAT Master (SOEM), is installed on it. Unlike other studies, the real-time performance of the EtherCAT master is evaluated at the output of the network interface card, so that the evaluation results include all possible effects from the EtherCAT master system. The implemented EtherCAT master can send and receive packets up to 20KHz control frequency with low jitter, even in stressed condition.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.12
• /
• pp.1580-1588
• /
• 1999

This paper evaluates the real-time performance of the Train Communication Network (TCN) that consists of WTB and MVB. A run-time scheduling algorithm for the hard-real time communication was proposed and its performance was evaluated. Also, a new addressing method and the adaptive tree algorithm were suggested to enhance performance. The overall performance was evaluated by computer simulation using Arena.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.49 no.7
• /
• pp.363-369
• /
• 2000

To flexibly evaluate performance and reliability of an electric power system in the aspect of the real-time system which is intrinsically characterized by stringent timing constraints fails catastrophically if its control input is not updated by its digital controller computer within a certain time limit called the hard deadline, we propose fuzzy-random variables and build a discrete event model embedded with fuzzy-random variables. Also, we adapt fuzzy-variables to a path-space approach, which derives the upper and lower bounds of reliability by using a semi-Markov model that explicitly contains the deadline information. Consequently, we propose certain formulas of state automata properly transformed by fuzzy-random variables, and present numerical examples applying the formulas as well.

• Journal of Korea Multimedia Society
• /
• v.18 no.9
• /
• pp.1058-1067
• /
• 2015

Dweller's safety is one of the most important factors for the evaluation of building performance. The process of conventional safety design which is normally performed by the codes and designer's experiences is not enough to check the whole possibilities of unexpected accidents in the built environment. It means that the dwellers might be always exposed by the dangerous situation which should have been removed in the architectural design process. In order to solve this problem, this study intends to introduce a rule-based performance evaluation technology based on BIM(Building Information Modeling). The proposed technology focuses on the real time evaluation of dweller's safety in the ordinary life in the designed building alternatives and uses a commercial BIM tool as a design and evaluation platform.

• Smart Structures and Systems
• /
• v.14 no.6
• /
• pp.1269-1289
• /
• 2014

With the sub-stepping technique, the numerical analysis in real-time dynamic hybrid testing is split into the response analysis and signal generation tasks. Two target computers that operate in real-time may be assigned to implement these two tasks, respectively, for fully extending the simulation scale of the numerical substructure. In this case, the integration time-step of solving the dynamic response of the numerical substructure can be dozens of times bigger than the sampling time-step of the controller. The time delay between the real and desired feedback forces becomes more striking, which challenges the well-developed delay compensation methods in real-time dynamic hybrid testing. This paper focuses on displacement prediction and force correction for delay compensation in the real-time dynamic hybrid testing with a large integration time-step. A new displacement prediction scheme is proposed based on recently-developed explicit integration algorithms and compared with several commonly-used prediction procedures. The evaluation of its prediction accuracy is carried out theoretically, numerically and experimentally. Results indicate that the accuracy and effectiveness of the proposed prediction method are of significance.

• Journal of Microbiology and Biotechnology
• /
• v.15 no.3
• /
• pp.595-602
• /
• 2005

A one-step real-time quantitative RT-PCR assay in combination with automated RNA extraction was evaluated for routine testing of HCV RNA in the laboratory. Specific primers and probes were developed to detect 302 bp on 5'-UTR of HCV RNA. The assay was able to quantitate a dynamic linear range of $10^7-10^1$ HCV RNA copies/reaction ($R^2=0.997$). The synthetic HCV RNA standard of $1.84{\pm}0.1\;(mean{\pm}SD)$ copies developed in this study corresponded to 1 international unit (IU) of WHO International Standard for HCV RNA (96/790 I). The detection limit of the assay was 3 RNA copies/reaction (81 IU/ml) in plasma samples. The assay was comparable to the Amplicor HCV Monitor (Monitor) assay with correlation coefficient r=0.985, but was more sensitive than the Monitor assay. The assay could be completed within 3 h from RNA extraction to detection and data analysis for up to 32 samples. It allowed rapid RNA extraction, detection, and quantitation of HCV RNA in plasma samples. The method provided sufficient sensitivity and reproducibility and proved to be fast and labor-saving, so that it was suitable for high throughput HCV RNA test.