• International Journal of Automotive Technology
• /
• v.4 no.3
• /
• pp.109-117
• /
• 2003

The analysis and evaluation of the transient performance by the transient response specifications under various acceleration speeds and types based on driver's typical acceleration habit are implemented by the experimental study to provide the appropriate direction for the transient control in a gasoline engine. The concept of the transient response specifications which consist of delay time, rising time, maximum overshoot and settling time, and the analysis method using them are introduced to evaluate the characteristics of the transient performance quantitatively. Furthermore four acceleration speeds and four acceleration types are set respectively to realize the various transient states which are similar to the real drive. Several performance parameters in terms of engine speed, manifold absolute pressure, fuel injection duration and air excess ratio are measured simultaneously during the various acceleration using a throttle actuator controlled by a PC. The transient response specifications characterized well the transient performance for the various acceleration speed and types quantitatively. Delay and rising time with increment of the acceleration speed became shorter, but settling time did longer. Intensified acceleration type appeared to be the most economical in view of fuel consumption, and linear acceleration type was found to have the least harmful emission concentration.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2000.10a
• /
• pp.91-97
• /
• 2000

Once a response spectrum is estimated for the site, if there is a need of generating realistic earthquakes time histories considering seismic sources and path effects, one alternative is to use statistical phase characteristics based on real earthquake records other than assuming arbitrary duration and envelope curves. In this study, statistics of group delay times derived from Japanese strong earthquake data were used for phase generation to fully capture the stochastic property of earthquakes. The result shows that simulated earthquake time histories can be generated according to earthquake magnitude and distances with target response spectrum.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.13 no.22
• /
• pp.87-98
• /
• 1990

The performance analysis and capacity planning of Service Control Point which is real time response system is studied. The system is modeled by multiclass open queueing network. The analytical method is used to solve the queueing network. The solution of the model has product form solution. The focus of this paper is to investigate the capacity of system under the restriction of response time. To get the reasonable capacities, nonlinear programming problem is formulated and is solved by GINO. And the simulation model using SLAM II is formulated.

• Journal of IKEEE
• /
• v.23 no.2
• /
• pp.358-363
• /
• 2019

In this paper, we implemented a welfare system for the elderly living alone, disabled, or babies to provide fast incident response in case of emergency situations. The proposed system can quickly recognize emergency situations using heart rate sensors and real-time image sharing. The sensors attached on a wrist band monitor the heart rate along with relevant bio signals of clients and send alarms to guardians in the emergency situations. At the same time, the real-time image signals are captured using OpenCV and sent to the guardians in order to give the exact information for fast and appropriate response to handle the situation. In the proposed system, the camera works only in the emergency situations so as to provide enough privacy to the client's every day life.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.68.4-68
• /
• 2002

$\textbullet$ This report presents an implementation a set of reusable software components which use of fault-tolerance embedded controller for railway signalling systems. These components can be used in real-time applications without application reprogramming. $\textbullet$ This library runs under VxWorks operating system and is oriented on real-time embedded systems. The library includes fault detection, fault containment, checkpointing and recovery components. $\textbullet$ The library enables to support high-speed response to fault occurrence in application software. Garbage collector together with VxWorks Watchdog provides both dead tasks detection and useless resources removing to avoid an overflow. Control flow...

• Proceedings of the Korea Society for Simulation Conference
• /
• 1998.03a
• /
• pp.27-31
• /
• 1998

The growing usage of multimedia communication applications with specific bandwidth and real-time delivery requirements has created the needs for quality of service(QoS). In response to the growing demand for an integrated services, the Reservation Protocol(RSVP) has been designed to exchange resource reservation among routers in the internet. RSVP protocol provides the quality of service for real-time applications but the network efficiency is reduced because of the limited bandwidth. In order to use network resources efficiently. We compare the resource efficiency of traditional reservation methods with that of the proposed method and evaluate the performance of the internet phone.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.12
• /
• pp.2401-2409
• /
• 2016

Android CPU governors exploit the DVFS (Dynamic Voltage Frequency Scaling) technique. The DVFS is a power management technique where the CPU operating frequency is decreased to allow a corresponding reduction in the CPU supply voltage. The power consumed by a CPU is approximately proportional to the square of the CPU supply voltage. Therefore, lower CPU operating frequency allows the CPU supply voltage to be lowered. This helps to reduce the CPU power consumption. However, lower CPU operating frequency increases a task's execution time. Such an increase in the task's execution time makes the task's response time longer and makes the task's deadline miss occur. This finally leads to degrading the quality of service provided by the task. In this paper, we evaluated the performance of Android CPU governors in terms of the power consumption, tasks's response time and deadline miss ratio.

• Journal of Korea Game Society
• /
• v.9 no.5
• /
• pp.43-52
• /
• 2009

This paper analyzes the four game physics engines in terms of real time techniques. Real time physics is the technology that simplifies the physics-based simulation to apply for the real time applications such as game. Our study includes two commercial physics engines, Havok's Physics SDK and NVIDIA's PhysX SDK, and two open source projects, Open Dynamics Engine and Bullet physics engine. As a result, most of them covers rigid body dynamics and some include either deformable body simulation or fluids simulation, or both. For real time simulation, they adopt the simplified numerical methods, the effective in collision detection/response, and also use the parallel processing hardwares, i.e., multi core CPU, Physics processing unit(PPU), or graphics processing unit(GPU).

• International conference on construction engineering and project management
• /
• 2015.10a
• /
• pp.336-338
• /
• 2015

This research is to propose an applicable framework for real-time health surveillance and safety monitoring at construction sites. First this study aims at finding (1) a framework for health surveillance that is likely to benefit employers and employees in the industry, (2) a valid way to identify factors or conditions with potential health concerns that can occur under particular work conditions, (3) An effective way to apply wireless/mobile sensors to construction workers using real-time/live data transmission methods, and (4) A relationship between a worker's vital signs and job site environment. Biosensors for physiological response and devices for weather/work related data are to collect real-time data. Relationships between jobs and physiological responses are analyzed and factors that touched particularly contributing to certain responses are identified. When data are incorporated with tasks, factors affecting tasks can be identified to estimate the magnitude of the factors. By comparing work and normal responses possible precautionary actions can be considered. In addition, the study would be lead to improving (1) trade-specific dynamic work schedules for workers which would be based on various factors affecting worker health level and (2) reevaluating worker productivity with health status and work schedule, thereby seeking ways to maximize worker productivity. Through a study, the paper presents expected benefits of implementing health monitoring.

• Journal of Korea Multimedia Society
• /
• v.12 no.1
• /
• pp.69-84
• /
• 2009

In this paper, a real-time web-casting framework for many individuals or small organizations imploring internet broadcasting, is designed and implemented. It is the purpose of the proposed framework that any individual can easily construct his own broadcast station if he has minimum facility for the content transmission to the framework. This type of system should have a flexible architecture to be applicable in wide variation of operational environment. Since the proposed framework follows a component-based hierarchical structure consisting of 3 types of components, it can effectively cope with change of internal or external operational environment by simple modification of the associated component with the change. Also, various types of target application systems in the aspects of cost and performance can be constructed in accordance with how to associate upper layer components with hardware platforms. A real prototype system based on the proposed framework is implemented, and then the response delay time is measured under varying number of content productions and content receivers. The results show that the response delay time follows M/M/1 model, which is one of the well-known performance models, and the implemented system may accommodate from 16 to 20 productions.