• 한국정보통신학회논문지
• /
• 제22권5호
• /
• pp.779-786
• /
• 2018

해양수산부는 2016년 유실어구에 의한 피해를 최소화하기 위해 전자어구실명제 실행계획을 발표하였다. 어구의 과다사용 및 폐어구 저감을 위해 어구의 종류 및 위치, 사용자의 실명을 포함한 정보를 IoT 기반의 통신을 이용하여 어선 및 관제센터에 효율적으로 전송할 수 있는 기술이 필요하다. 본 논문에서는 전자어구실명제를 실행하기 위한 LoRa 기반의 부이 장착 단말 장치와 어선용 게이트웨이를 제안한다. SEMTECH사의 SX1276 칩 사양과 ISM 대역인 900 MHz 대역을 사용하여 1(게이트웨이):200(부이) 통신이 가능하도록 설계하고 제작하였다. 또한 전자어구실명제 실행의 기술적 제안으로써의 실증을 위해 해상 시험 결과를 분석하였다.

• 한국산학기술학회논문지
• /
• 제21권4호
• /
• pp.546-551
• /
• 2020

함정에는 격벽으로 구분되어 나누어지는 공간인 격실이 종류와 목적에 따라 수개 혹은 수십 개가 존재한다. 이러한 격실들은 화재 및 화재로 인한 연기의 전이방지, 침수 시 침수의 확산 방지 등 특정 격실에서 발생하는 특이 상황들이 타 격실로의 전이를 방지하여 생존성 향상에 목적을 두고 설계된다. 생존성 향상 목적 달성을 위하여 각 격실들은 기밀 또는 수밀을 유지하도록 건조하며, 각 격실의 기밀 또는 수밀 정도를 확인하기 위하여 함정 건조 단계에서 평가를 수행한다. 건조하고 있는 군함에 관한 평가는 해군 지침에 의거하여 함 건조업체 주관으로 해군 및 국방기술품질원이 입회하여 평가를 실시한다. 생존성과 직결되는 만큼 격실 기밀 평가의 중요성은 매우 높아 명확한 기준에 따라 수행되고 있으나, 1개 이상의 복수개 격실 기밀 평가 시 1개 압력센서로 압력을 측정하여 격실 압력을 실시간으로 확인하는 것과 각 격실별 미세한 압력 변동 사항 확인이 제한되는 것을 식별하였다. 따라서 본 연구에서는 현재 수상함정 중 군함에서 실시하고 있는 그룹 격실 기밀평가 방안에 대한 개선 방안 및 신뢰성 검증 방안에 대해 서술하였다.

• 한국항행학회논문지
• /
• 제24권2호
• /
• pp.61-66
• /
• 2020

해양은 지구 표면의 70.8%를 차지하기 때문에 해양산업에서 IoT 기술의 적용은 넓은 영역에 배치된 수많은 장치로부터 다양한 정보를 수집하고 활용하는 것이다. LPWA는 통신 거리가 넓은 특징으로 해양에 배치하기에 매우 적합한 통신이다. 본 논문에서는 전자 어구 실명제를 실행하기 위한 핵심기술인 private LoRa를 기반으로 실해역 성능 거리 실험은 진행하였다. sx1276을 기반으로 한 private LoRa 모듈을 개발하였고, 게이트웨이는 private LoRa로 수신 받은 데이터를 SKT Cat. M1을 이용하여 서버로 데이터를 전송하도록 개발하였다. 해발 599 m에 게이트웨이를 설치하고 25 km, 40 km, 60 km에서 데이터 송수신 실험을 한 결과, 각각 96.1%. 97.1%, 96.2%의 통신 성공률을 보이는 것을 확인할 수 있었다.

• 대한조선학회논문집
• /
• 제35권3호
• /
• pp.26-37
• /
• 1998

본 논문에서는 시험선 $\ulcorner$나래$\lrcorner$에 적용된 자세 제어 기술 및 그 실해역 시험 결과를 보이고자 한다. $\ulcorner$나래$\lrcorner$는 하부 몰수체와 그에 부착된 제어판을 이용하여 선체를 일정량 부상시키는 복합 지지선형을 채택하여 건조된 선박으로서, 본 연구원의 자체 설계를 거쳐 건조된 유인 시험선이다. 이러한 선형의 선박은 부상 상태에서 Heave, Pitch Roll의 3자유도에 대해 복원력이 거의 작용하지 않기 때문에 정적 불안정성을 가지며, 그에 따라 자세 제어 시스템이 필수적으로 요구된다. 시험선 $\ulcorner$나래$\lrcorner$에는 제어판 구동을 위한 유압 구동 장치 및 선체 운동의 계측을 위한 각종 계측 장비가 설치되었다. 제어기로는 PID 제어기가 사용되었으며, 실시간 제어를 위해 Pentium급 산업용 PC가 탑재되었다. 약 3개월 여에 걸쳐 부상 시험 및 조종 시험을 포함한 실해역 시험이 수행되었으며, 만족스런 제어 성능이 발휘됨을 확인하였다.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2000년도 추계학술대회 논문집
• /
• pp.123-128
• /
• 2000

The ocean is now increasingly suffering from pollution mainly caused by oil spill accidents roil increasing marine transportation. It cause not only the deterioration of ocean resources but also critical damage on the ocean ecosystem. Present study is an experimental one for the development of the oil skimmer which can collect spilled-oil actively and effectively from the sea surface. As an effort of achieving it, a new type of water wheel attached nil skimmer was devised, based upon the concept of orifice. The shapes of the water wheel, blades and oil storing tank are found to be very important factors on the oil skimming performance through systematic experimental analysis. Real oil recovery test was also carried out in square tank using the oil skimmer with their optimal shapes. Quite satisfactory result are obtained from the test which showed 99% and 98% recovery rates for light oil and heavy oil in still water condition, respectively.

• 한국기계가공학회지
• /
• 제12권1호
• /
• pp.15-21
• /
• 2013

The safety and stability of 5MW class offshore wind turbine Jack-up platform was investigated through ocean basin experiment. For simulating the environmental condition of yellow sea in the South Korea, diverse waves, winds and currents were performed based on Froude's number. Regular wave and irregular wave based on Froude's number were applied to the wind turbine structure. In experiments, the height and period of regular wave type were scaled down as the 1:50 ratio of real wave condition. Irregular wave type was simulated with TMA(Texel Storm, Marsen and Arsloe)spectrum. The vertical reaction force, resonance period and wave pressure applied to multi-supporters of wind offshore structure were measured experimentally. Finally, the results showed that the capsizing situation of the offshore structure was generated by the severe environmental condition.

• 수산해양기술연구
• /
• 제42권3호
• /
• pp.148-157
• /
• 2006

A model experiment, simulation test using personal computer and real sea trial fishing were carried out to investigate the basic efficiency of bottom trawl net which can be used in the sea mount of North West Pacific, and experimental values were analyzed as the values of full-scale bottom trawl net. Hydrodynamic resistance for the full-scale trawl net according to the Koyama equation was 2.1 times higher than that of simulation and 2.4 times higher than that of model experiment at the average towing velocity. At the 3.5kt's of towing speed, net width of the full-scale trawl net was 2.5% smaller than that of simulation and 8.2% larger than that of model experiment. On the fishing experiment of the full-scale trawl net for the 3.5kt's of average towing speed, average net height of A group(same direction with external force) was 423.5% higher than that of model experiment and 457.1% higher than that of simulation and that of B group(opposite direction with external force) were 283.8% and 306.3% higher than in case of model experiment and Simulation respectively. Net mouth of the full-scale trawl net was 338.1-504.6% higher than those of model experiment and simulation in A group, and 525.2-745.3% higher in B group.

• 로봇학회논문지
• /
• 제18권4호
• /
• pp.472-480
• /
• 2023

This paper describes the development of a test-equipment for the pre-verification of navigation performance in cluster-based AUVs (Autonomous Underwater Vehicle). In the development of an AUV, conducting hardware and software development sequentially is not efficient due to the limited research and development period. Therefore, in order to reduce the overall development time and achieve successful development results, it is essential to pre-validate the navigation system and navigation algorithms. Accordingly, this paper explains the test-equipment for pre-verification of navigation performance, and ultimately confirms the stability of the navigation system and the performance of the navigation algorithms through the analysis of five types of navigation sensor data stored during real-sea experiments. The results demonstrate that through the development and verification of the test-equipment, it is possible to shorten the overall development period and improvement of product quality in the process of developing multiple AUVs.

• 한국해양공학회지
• /
• 제23권2호
• /
• pp.53-57
• /
• 2009

Unmanned surface vehicles (USVs) conduct various missions while exchanging information with control centers. Maritime security, coastal surveillance, and sea surface and undersea inspections are included in the important missions of USVs. To carry out these missions, large amounts of information are required from sensors, such as cameras, radars, and sonars. High bandwidth wireless communication is necessary to send this information to the control center in real time. In general, USVs are made using small boats. The motions of small boats are easily influenced by sea waves and the magnitude of changes in the attitude is large and the period of the changes is short in comparison with large ships. Thus, the direction of an antenna beam pattern for a wireless communication system in a USV can change rapidly, and with a large magnitude. In addition, since the reflection of electromagnetic waves on the sea surface is not negligible, the effect of multipath noises on the wireless communication system must be considered carefully. There are also several other elements that negatively affect wireless communication systems in USVs. This paper presents the wireless communication environment to be considered in the design and implementation of wide bandwidth communication systems for USVs. Short test results for wireless communication on the sea are also given.

• 한국산업융합학회 논문집
• /
• 제23권5호
• /
• pp.789-798
• /
• 2020

This paper considers the development of the dynamic analysis model and simulation-based operation safety estimation of A-Frame to be applied to the test evaluation support vessel for real sea test. The support vessel will be manufactured by modifying the existing offshore support vessel. Also, development and installation of various sensors and supporting facilities for test evaluation are under preparation. Among these facilities, A-Frame is an equipment that transfers marine equipment from ship deck to the sea floor, and is being designed to transfer up to 50 ton class equipment. However, the A-Frame is a moving equipment using hydraulic cylinders. When the 50 ton equipment is attached and transferred to A-Frame, the buckling of cylinders may occur or A-Frame becomes inoperable due to the influence of huge inertia. For this reason, safety verification should be performed using dynamic analysis techniques that can take into account huge inertia forces in the design of A-Frame. Therefore, in this study, A-Frame and ship behavior were modeled using dynamic analysis method, and the applied loads of various equipment including hydraulic cylinder of A-Frame was measured and the operation safety review was performed.