• 대한임베디드공학회논문지
• /
• 제13권1호
• /
• pp.25-32
• /
• 2018

In this paper, we present a proposed monitoring system for smart factories with several aspects, including information gathering, analysis, control, and display that relate to concurrently operation processes in the factory area. This paper proposes a monitoring and management system for industrial automation. In particular, it uses an Internet of Thing (IoT) device with a data protocol unit to convert the industrial protocols and transfer the information on various parameters. In the case of data communication, the proposed monitoring system is designed to support users to remotely manage with the cloud server by implementing conversion between Modbus RTU and Modbus TCP of protocol communications. The proposed communication technique has been verified by experiments.

• 한국안전학회지
• /
• 제29권5호
• /
• pp.47-53
• /
• 2014

Despite the automatic fire alarm system, according to the national fire data system of national emergency management agency, the fires account for 40,932 incidents, 2,184 injuries and about 430 billion won in property losses in 2013. Since the conventional automatic fire alarm system has several weaknesses related to electrical signal such as noise, surge, lighting, etc. Most fires are mainly caused by electrical faults, mechanical problem, chemical, carelessness and natural. The electrical faults such as line to ground fault, line to line fault, electrical leakage and arc are one of the major problems in fire. This paper describes the development of a novel real-time fire monitoring system algorithm including fault detection function which puts the existing optic smoke and heat detectors for fire detection with current and voltage sensors in order to utility fault monitoring using high accuracy DAQ measurement system with LabVIEW program. The fire detection and electrical fault monitoring with a proposed a new detection algorithm are implemented under several test. The fire detection and monitoring system operates according to the proposed algorithm well.

• 대한임베디드공학회논문지
• /
• 제11권3호
• /
• pp.143-151
• /
• 2016

In this paper, a real-time air quality monitoring system based on wireless network is designed and implemented for industrial park or multiuse facilities. The existing gas detector is high price and hard to apply the remote monitoring system. On the other hand, demand for air quality monitoring is increasing because of industrial gas accident, air pollution, and so on. In Korea, indoor air regulation was established by law. According to indoor air regulation, CO2, CO, and NO2 are important gases as the air quality standard. So we study the gas detector for indoor air quality and the wireless network system. The wireless network consist of sensor network and WCDMA to apply various place. To verify the performance of the implemented gas detector, the gas measurement experiment is performed in laboratory environment by using the realized gas detecting wireless sensor node. And we evaluate the experiment results.

• 동력기계공학회지
• /
• 제12권6호
• /
• pp.18-23
• /
• 2008

This paper describes development of real-time condition monitoring system to observe state of a container crane in a port. To analyze the state of a crane, the strength and the direction of wind are measured with sensors along with the load resulted a crane at the moment. The measured signals are processed by especially developed conditioning board and converted into digital data. Measured data are analyzed to define the state of the crane at an indicator. For transmission of these data to the indicator, we implemented wireless sensor network based on IEEE 802.15.4 MAC(Media Access Control) protocol and Bluetooth network protocol. To extend the networking distance between the indicator and sensor nodes, the shortest path routing algorithm was applied for WSN(Wireless Sensor Network) networks. The indicator sends the state information of the crane to monitoring server through IEEE 802.11 b wireless LAN(Local Area Network). Monitoring server decides whether alarm should be issued or not. The performance of developed WSN and Bluetooth network were evaluated and analyzed in terms of communication delay and throughput.

• 대한기계학회논문집B
• /
• 제35권9호
• /
• pp.955-960
• /
• 2011

본 연구에서는 실시간 무선 철도시스템 모니터링을 위하여 열차 주행에 따라 발생하는 열 및 진동 에너지를 전기자원화 하는 신재생 에너지 개념의 전력원인 자가발전 구동 기술에 대한 철도시스템 적용 가능성을 확인하였다. 이를 위해 실제 주행 중인 고속열차를 이용하여 철도차량의 운행환경 하에서 발생하는 열에너지와 진동에너지를 실측하여, 주행 중 이들 에너지 발생량 및 변화를 분석하고 이를 통해 진동 및 열 에너지를 이용하는 자가발전 모듈의 예측 전력량을 계산하고, 이 전력량에 대한 이 모니터링 시스템 적용 가능성에 대한 연구를 수행하였다.

• 한국응급구조학회지
• /
• 제16권3호
• /
• pp.9-18
• /
• 2012

Purpose : The purpose of this study was to determine the changes that occur due to the real-time monitoring of paddle pressures which has an important influence on the defibrillation success rate in defibrillation treatment known as the only treatment for cardiac arrest patients with VF. Methods : 40 people participated in the cardiac arrest simulation training and played the role of the defibrillation operator. Investigators measured the pressure of paddle while defibrillating by using instrument which was developed by the investigator. Results : Through real-time monitoring of the paddle pressures of defibrillator by indicator, the front sternum paddle showed a 77.5% success rate and the apex paddle showed a 40% success rate. While the values without monitoring the paddle pressures, the front sternum paddle showed a 51% success rate and the apex paddle showed a 20% success rate. These experiment revealed statistically significant(p <.001) low success rate. Conclusion : The method of monitoring the paddle pressures during defibrillation showed that the paddle can be precisely gripped. The success rate of paddle pressures is significantly correlated with height, weight and grip strength.

• 한국구조물진단유지관리공학회 논문집
• /
• 제5권3호
• /
• pp.191-201
• /
• 2001

In spite of the increasing construction of segmental PSC box girder bridges, the techniques associated with real-time monitoring, construction control and safety assessment during construction have been less developed compared with the construction techniques. Thus, the development of an integrated system including real-time measurement and monitoring, control and safety assessment system during construction is necessary fur more safe and precise construction of the bridges. This study presents a prototype integrated monitoring system for preventing abnormal behavior and accidents under construction stages, that consist of behavior control system for precise construction, reliability-based safety assessment system, and structural analysis. Also, a prototype software system is developed on the basis of the proposed model. It is successfully applied to the Sea-Hae Grand Bridge built by FCM. The integrated system model and software system can be utilized for the safe and precise construction of segmental PSC bridges during construction.

• 산업공학
• /
• 제19권1호
• /
• pp.43-52
• /
• 2006

In order to make best use of NC machine tools with minimal labor costs, they need to be in operation 24 hours a day without being attended by human operators except for setup and tool changes. Thus, unattended machining is becoming a dream of every modern machine shop. However, without a proper mechanism for real-time monitoring of the machining processes, unattended machine could lead to a disaster. Investigated in this paper are ways to using PC camera as a real-time monitoring system for unattended NC milling operations. This study defined five machining states READY, NORMAL MACHINING, ABNORMAL MACHINING, COLLISION and END-OF-MACHINING and modeled them with DEVS (discrete event system) formalism. An image change detection algorithm has been developed to detect the table movements and a flame and smoke detection algorithm to detect unstable cutting process. Spindle on/off and cutting status could be successfully detected from the sound signals. Initial experimentation shows that the PC camera could be used as a reliable monitoring system for unattended NC machining.

• Transactions on Electrical and Electronic Materials
• /
• 제14권2호
• /
• pp.71-77
• /
• 2013

Advanced semiconductor manufacturing technology requires methods to maximize tool efficiency and improve product quality by reducing process variability. Real-time plasma process monitoring and diagnosis have become crucial for fault detection and classification (FDC) and advanced process control (APC). Additional sensors may increase the accuracy of detection of process anomalies, and optical monitoring methods are non-invasive. In this paper, we propose the use of a chromatic data acquisition system for real-time in-situ plasma process monitoring called the Plasma Eyes Chromatic System (PECS). The proposed system was initially tested in a six-inch research tool, and it was then further evaluated for its potential to detect process anomalies in an eight-inch production tool for etching blanket oxide films. Chromatic representation of the PECS output shows a clear correlation with small changes in process parameters, such as RF power, pressure, and gas flow. We also present how the PECS may be adapted as an in-situ plasma arc detector. The proposed system can provide useful indications of a faulty process in a timely and non-invasive manner for successful run-to-run (R2R) control and FDC.

• 전자공학회논문지CI
• /
• 제45권1호
• /
• pp.62-69
• /
• 2008

본 논문에서는 ZigBee와 SIP를 이용하여 사용자의 위치와 시간에 상관없이 사용자의 상태를 의료진과 사용자가 쉽게 확인할 수 있도록 실시간으로 생체 신호를 전송하고 모니터링하는 시스템을 제안하였다. 센서와 사용자 무선 단말기 사이의 데이터 전송을 구조가 간단하고 낮은 원가의 장점을 가지는 ZigBee로 구현하였으며, ZigBee를 이용한 센서 네트워크 구성 시 기존의 Ad-hoc 라우팅 프로토콜을 사용하지 않고 트리 기반의 네트워크를 구성함으로써 에너지 소모량을 감소시켰다. 또한 WLAN 기반의 사용자 무선 단말기와 모니터링 콘솔, SIP 서버, 데이터베이스 서버로 시스템을 구성하였다. 실시간 생체 신호 모니터링 시스템을 구현함으로써 U-Health 서비스가 가능하게 되고, 의료 서비스의 효율성을 향상시킨다.