• 한국정밀공학회지
• /
• 제9권4호
• /
• pp.36-43
• /
• 1992

This paper presents a hierarchical real-time operation control and monitoring scheme of the FMS/CIM center which has been implemented at the Automation and Systems Research Institute of Seoul National University. The hierarchical structure of the whole scheme consists of three lavers. The upper layer is in charge of on-line scheduling, computer network control, shop-floor monitoring and command generation for AGV dispatching, machining, assembly, inspection, set-up, etc. The middle layer has six modules, which are installed in the FMS host computer with the upper layer and run on the multi-tasking basis. Each module is connected to one of six cell controllers distributed in the FMS model plant and transfers operation command down to each cell controller through the Ethernet/TCP-IP local area network. The lower layer is comprised of six cell control software modules for machining cell, assembly cell, inspection cell, set-up stations. AS/RS and AGV. Each cell controller reports the status of the manufacturing facilites to the middle layer as well as ecxecuting the appropriate sequence control of the manufacturing processes.

• 화약ㆍ발파
• /
• 제33권2호
• /
• pp.40-43
• /
• 2015

본 연구에서는 싱가폴 창이 국제공항 신규 터미널(5번) 확장 지반 보강공사에 적용된 진동다짐공법을 소개하고 이에 따라 발생되는 진동을 장기간 실시간으로 측정하기 위하여 최적의 진동 분석 S/W 개발을 완료하였다. 아울러 이와 유사한 파일항타 작업 진동이나, 방파제 설계를 위한 주기적 반복적으로 발생하는 파도에 의한 진동이나 초고층 건물, 터널, 교량 등 대형구조물에서 발생하는 진동을 장시간에 걸쳐 실시간으로 측정이 가능함을 알아보고자 하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.1173-1174
• /
• 2006

The Photovoltaic(PV) generation system is a promising source of energy for the future. Since the need for renewable energy has been increased, the research of PV generation system has also been progressed. The main subject of this paper is about making the more useful real-time monitoring program to get and save the data from photovoltaic generation system of 30kW grid-connected. Therefore, it uses LabView for this real-time monitoring program.

• 한국산업정보학회:학술대회논문집
• /
• 한국산업정보학회 2002년도 춘계학술대회 논문집
• /
• pp.69-75
• /
• 2002

본 논문에서는 SNMP를 이용하여 네크워크 트래픽을 실시간으로 모니터링하는 시스템을 제안하였다. 제안된 시스템은 네트워크 정보를 수집하여 분석하고, 실시간 모니터 링을 지원하는 분석 서버 시스템과 분석된 결과를 그래픽적으로 보여주는 클라이언트 시스템으로 구성된다. 분석 서버 시스템은 클라이언트 시스템의 분석 요구에 따라 네트워크 트래픽의 정보를 수집하여 분석하고 응답한다. 클라이언트 시스템은 사용자의 관리요청에 대한 사용자 인터페이스 기능과 분석된 결과를 출력하는 기능이 있으며, 실제 네트워크 상에서의 활용성을 높이기 위해 웹 기반 기술을 적용하였다. 제안된 시스템은 사용자가 웹을 통해 네트워크 상의 관리 행위를 효과적으로 수행할 수 있도록 도움을 줄 것이다.

• 전기학회논문지P
• /
• 제63권4호
• /
• pp.345-350
• /
• 2014

DC electrolytic capacitor is widely used in the power converter including PWM inverter, switching power supply and PFC Boost converter system because of its large capacitance, small size and low cost. In this paper, basic characteristics of DC electrolytic capacitor vs. frequency is presented and the real-time estimation scheme of ESR and capacitance based on the bandpass filtering is adopted to the single phase boost converter of uninterruptible power supply to diagnose its split dc-link capacitors. The feasibility of this real-time failure prediction monitoring system is verified by the computer simulation of the 5[kW] singe phase PFC half-bridge boost converter.

• 산업경영시스템학회지
• /
• 제37권1호
• /
• pp.33-40
• /
• 2014

Air compressor is an important facility with electric power in the industry. However, because of the noise and vibration of air compressor and is installed outside the building management difficulty. In this study, MCP (Micro Control Processor) to remote monitoring of the air compressor via the compressed air through improved quality and allows stable maintenance were designed. So, increase the productivity improvement of energy-saving effect can be obtained. Remote real-time information stored on your PC to manage air compressor equipment was higher reliability. Monitoring system is developed in this study was applied to embedded systems. It is easy to install air compressor, and low maintenance costs was to raise the economic impact.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 춘계학술대회 논문집 에너지변화시스템부문
• /
• pp.201-203
• /
• 2009

This paper presents the real time stray current monitoring techniques on the DC railway system. These techniques are two types. The first one is the rail potential measurement technique between running rail and earthing mats on the important locations such as substation, station, and so on. And the second one is measurement technique of stray current through substation earthing mats and from collection mats, and continuous monitoring of return currents through the running rails. We need to apply these techniques on DC railway system to monitor stray current periodically and maintain the system properly.

• 한국안전학회지
• /
• 제20권3호
• /
• pp.1-8
• /
• 2005

The industrial induction motor is widely used in the rotating electrical machine for the transmission of power. It is very reliable equipment, but it could lead to the loss of production and lift when failure occurs. Therefore, the failure data is acquired and analyzed by attaching an exclusive instrument to existing induction motor. However, these instruments could lead to side effects, increasing the production costs, because they are very expensive. The purpose of this study is the development of an induction motor bearing failure diagnosis system constructed using LabVIEW which can be supplied the kernelled function, process monitoring and current signature analysis. In addition, the availability and reasonability of the constructed system was examined for an induction motor with failure defects in outer raceway and ball bearing. From the results, it shows that failure diagnosis system constructed is useful for real-time monitoring with detection of bearing defects over the web.

• 한국항행학회논문지
• /
• 제17권6호
• /
• pp.664-671
• /
• 2013

본 논문에서는 항공기내에서 전력을 무선으로 측정할 수 있는 AEMS(Zigbee electric power measurement monitoring system)시스템을 제안한다. AEMS시스템은 현재 상용화되고 있는 전력 측정 시스템을 분석하여 이를 보완하고 항공기내에서도 전력 변화를 쉽게 알 수 있도록 최근 가장 이슈가 되는 스마트폰과 모니터링 시스템을 연결하여 설계하였다. 또한, 실시간 전력 측정 시스템을 도입하여 전기 사용량을 실시간으로 제어함으로써 보다 실용성 있는 전력계측 시스템을 구축하였다.

• Journal of Information Processing Systems
• /
• 제15권3호
• /
• pp.478-491
• /
• 2019

This work develops a monitoring system for the population with health concerns. A belt integrated with an on-body circuit and sensors measures a wearer's selected vital signals. The electrocardiogram sensors monitor heart conditions and an accelerometer assesses the level of physical activity. Sensed signals are transmitted to the circuit module through digital yarns and are forwarded to a mobile device via Bluetooth. An interactive application, installed on the mobile device, is used to process the received signals and provide users with real-time feedback about their status. Persuasive functions are designed and implemented in the interactive application to encourage users' physical activity. Two signal processing algorithms are developed to analyze the data regarding heart and activity. A user study is conducted to evaluate the performance and usability of the developed system.