• Journal of KIISE:Computer Systems and Theory
• /
• v.31 no.11
• /
• pp.658-672
• /
• 2004

Multimedia applications are required to process the huge amount of data at high speed in real time. The memory reference instructions such as loads and stores are the main factor which limits the high speed execution of processor. To enhance the memory reference speed, cache prefetch schemes are used so as to reduce the cache miss ratio and the total execution time by previously fetching data into cache that is expected to be referenced in the future. In this study, we present an advanced data cache prefetching scheme that improves the conventional RPT (reference prediction table) based scheme. We considers the cache line size in calculation of the address stride referenced by the same instruction, and enhances the prefetching algorithm so that the effect of prefetching could be maintained even if an irregular address stride is inserted into the series of uniform strides. According to experiment results on multimedia benchmark programs, the cache miss ratio has been improved 29% in average compared to the conventional RPT scheme while the bus usage has increased relatively small amount (0.03%).

• The Journal of Korean Institute of Next Generation Computing
• /
• v.15 no.4
• /
• pp.18-29
• /
• 2019

A dynamic adaptive streaming server consumes high processor power because it handles a large amount of transcoding operations at a time. For this purpose, multi-processor architecture is mandatory for which effective transcoding task distribution strategies are essential. In this paper, we present the design and implementation details of the transcoding workload distribution schemes at a 2-tier (frontend node and backend node) transcoding server. For this, we implemented four schemes: 1) allocation of transcoding tasks to appropriate back-end nodes, 2) task scheduling in the back-end node and 3) the communication between front-end and back-end nodes. Experiments were conducted to compare the estimated and the actual power consumption in a real testbed to verify the efficacy of the system. It also proved that the system can reduce the load on each node to optimize the power and time used for transcoding.

• Journal of Korea Multimedia Society
• /
• v.14 no.1
• /
• pp.54-75
• /
• 2011

PoC(Push-to-talk Over Cellular) is an integrated technology of group voice calls, video calls and internet based multimedia services. If a PoC user can not participate in the PoC session for various reasons such as an emergency situation, lack of battery capacity, then the user can use the PoC Box which has a similar functionality to the MM Box in the MMS(Multimedia Messaging Service). The RTSP(Real-Time Streaming Protocol) method is recommended to be used when there is a transmission session between the PoC box and a terminal. Since the existing VOD service uses a wired network, the packet size of RTSP-based VOD service is huge, however, the PoC service has wireless communication environments which have general characteristics to be used in RTSP method. Packet loss in a wired communication environments is relatively less than that in wireless communication environment, therefore, a buffering latency occurs in PoC service due to a play-out delay which means an asynchronous play of audio & video contents. Those problems make a user to be difficult to find the information they want when the media contents are played-out. In this paper, the following techniques and methods were proposed and their performance and superiority were verified through testing: cross-over dual reception buffering technique, advance partition multi-reception buffering technique, and on-demand multi-reception buffering technique, which are designed for effective picking up of information in media content being transmitted in short amount of time using RTSP when a user searches for media, as well as for reduction in playback delay; and same-priority packetization transmission method and priority-based packetization transmission method, which are media data packetization methods for transmission. From the simulation of functional evaluation, we could find that the proposed multiple receiving buffering and packetizing methods are superior, with respect to the media retrieval inclination, to the existing single receiving buffering method by 6-9 points from the viewpoint of effectiveness and excellence. Among them, especially, on-demand multiple receiving buffering technology with same-priority packetization transmission method is able to manage the media search inclination promptly to the requests of users by showing superiority of 3-24 points above compared to other combination methods. In addition, users could find the information they want much quickly since large amount of informations are received in a focused media retrieval period within a short time.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.46 no.3
• /
• pp.75-88
• /
• 2009

This paper presents a video quality assessment method based on quality degradation factors of real-time multimedia streaming services. The video quality degradation is caused by video source compression and network states. In this paper, we propose a blocky metric on an image domain to measure quality degradation by video compression. In this paper, the proposed boundary strength index for the blocky metric is defined by ratio of the variation of two pixel values adjacent to $8{\times}8$ block boundary and the average variation at several pixels adjacent to the two boundary pixels. On the other hand, unnatural image movement caused by network performance deterioration such as jitter and delay factors can be observed. In this paper, a temporal-Jerkiness measurement method is proposed by computing statistics of luminance differences between consecutive frames and play-time intervals between frames. The proposed final Perceptual Video Quality Metric (PVQM) is proposed by consolidating both blocking strength and temporal-jerkiness. To evaluate performance of the proposed algorithm, the accuracy of the proposed algorithm is compared with Difference of Mean Opinion Score (DMOS) based on human visual system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.5B
• /
• pp.430-441
• /
• 2006

As the various A/V devices and home networks are delivered to users, home networks are changing to an entertainment network. It is expected that the required network bandwidth and the amount of usage of media content in home entertainment networks will be increased. Although the access networks and home networks becoming a high speed network, there remains the problems for QoS-guaranteed media content transfer in home networks. Also, in the home network, there can be network traffic caused by applications like video conferencing, video telephone, and VoIP(voice over IP) as well as inner network traffic of home network. Since media content transfer requires the real-time delivery, it is very important and basic requirement that is to transfer media content to A/V device user wants while keeping the media quality. Even though there are many middleware protocol for home networking, they provide basic device discovery and control or simple functions for QoS-guaranteed media content transfer that are not enough to provide QoS-guaranteed media transfer service that user wants. Thus, in this paper, we propose the technique based on UPnP(universal plug and play) protocol for QoS-guaranteed media content transfer in the home network. The proposed technique is compatible with UPnP and can be used with UPnP as additional functions. In this paper, we utilize VideoLAN application to verify the proposed technique. We add the additional modules that support the proposed technique's function to VideoLAN and we verify the its functions through various test scenarios.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.3
• /
• pp.997-1005
• /
• 2010

Recently, there has been a growing interest in the use of WLAN technology due to its easy deployment, flexibility and so on. Examples of WLAN applications range from standard internet services such as Web access to real-time services with strict latency/throughput requirements such as multimedia video and voice over IP on wireless network environments. Fair and efficient distribution of the traffic loads among APs(Access Points) has become an important issue for improved utilization of WLAN. This paper focuses on an AP selection scheme for achieving better load balance, and hence increasing network resource utilization for each user on wireless network environments. This scheme makes use of active scan patterns and the network delay as main parameters of load measurement and AP selection. This scheme attempts to estimate the AP traffic loads by observing the up/down delay and utilize the results to maximize the link resource efficiency through load balancing. We compared the proposed scheme with the original SNR(Signal to Noise Ratio)-based scheme using the NS-2(Network Simulation.2). We found that the proposed scheme improves the throughput by 12.5% and lower the network up/down link delay by 36.84% and 60.42%, respectively. All in all, the new scheme can significantly increase overall network throughput and reduce up/down delay while providing excellent quality for voice and video services.

• Journal of KIISE:Computing Practices and Letters
• /
• v.7 no.4
• /
• pp.273-287
• /
• 2001

In this paper, we introduce our experience for designing and implementing a media manager in the Integrated Streaming Service Architecture (ISSA) developed by the authors. The media manager is regarded as a necessary module in the ISSA framework for the following reasons. It realizes that from which locations of the media source devices, the media streams are coming. Once it knows where the origin is, the media manager should recognizes what types of stream are. After that, it performs how to chose an appropriate CODEC to handle the recognized input streams efficiently, and what type of media playback device should be selected. In order to do such a job efficiently, the proposed media manager consists of two modules source module and sink module. The major role of a media source module is to make an abstraction for the media streams that are coming from various types of media device. This, in consequence, enables a media manager to consistently handle tlle media streams without considering wherever they come from. On the other hand, the media sink module distributes the input streams to an appropriate media device to playback. One of the remarkable virtues of the proposed media manager is an ability to supporting high value-added database services since it provides an interface between the ISSA and real-time multimedia database. Also, it provides the RTP!RTSP source filter and Winamp gateway modules which allow the flexibility to the system. Moreover, the media manager can adopt any types of new media which in fact will provide scalability to the ISSA.

• 지역과문화
• /
• v.8 no.2
• /
• pp.49-68
• /
• 2021

The pandemic of COVID-19 also affected performing arts business and stimulated 'Untact' performances, which means online streaming of the shows including real-time streaming. This study sought to examine factors to the consumers' acceptance. The research framework was based on the VAM, a revised model of TAM for the ICT products and services. For the research, consumer survey was conducted, where ndependent variables are perceived usefulness, pleasure, technicalty and innovation resistance, and dependent variables are percieved value and acceptance. Smart PLS was used to test the hypothesis. The result shows that the significant factors were percieved usefulness(+), pleasure(+) and innovation resistance(-). The percieved technicalty was not significant, the major reason would be that the digital devices and the internet technology are percieved a commodity these days in Korea. Percieved value was significant factor to acceptance. This study is meaningful because it is about the new phenomenon of 'untact' performance through the VAM methodology and it examined the significant factors to the attitude from the perspective of benefits and costs. There is limit that this study didn't consider old peoples' attitude. It is the reason that the continuous researches are necessary.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.157-157
• /
• 2017

To minimize the damage by wild birds and acquire the benefits such as protection against weeds and maintenance of water content in soil, the mulching black color vinyl after seeding should be carried out. Non-contact and non-destructive methods that can continuously determine the locations are necessary. In this study, a crop position detection method was studied that uses infrared thermal image sensor to determine the cotyledon position under vinyl mulch. The moving system for acquiring image arrays has been developed for continuously detecting crop locations under plastic mulching on the field. A sliding mechanical device was developed to move the sensor, which were arranged in the form of a linear array, perpendicular to the array using a micro-controller integrated with a stepping motor. The experiments were conducted while moving 4.00 cm/s speed of the IR sensor by the rotational speed of the stepping motor based on a digital pulse width modulation signal from the micro-controller. The acquired images were calibrated with the spatial image correlation. The collected data were processed using moving averaging on interpolation to determine the frame where the variance was the smallest in resolution units of 1.02 cm. Non-linear integral interpolation was one of method for analyzing the frequency using the normalization image and then arbitrarily increasing the limited data value of $16{\times}4pixels$ in one frame. It was a method to relatively reduce the size of overlapping pixels by arbitrarily increasing the limited data value. The splitted frames into 0.1 units instead of 1 pixel can propose more than 10 times more accurate and original method than the existing correction method. The non-integral calibration method was conducted by applying the subdivision method to the pixels to find the optimal correction resolution based on the first reversed frequency. In order to find a correct resolution, the expected location of the first crop was indicated on near pixel 4 in the inversion frequency. For the most optimized resolution, the pixel was divided by 0.4 pixel instead of one pixel to find out where the lowest frequency exists.

• 한국HCI학회:학술대회논문집
• /
• 2008.02a
• /
• pp.601-606
• /
• 2008

When sharing real-time media in the ubiquitous computing environments, due to heterogeneous performance of devices, conflict to users' media service requirements might be occurred. To address the problems, there are extensive researches about media streaming QoS control schemes in the aspects of network or application. However, their deployment has met with difficulty because of critical reasons such as high development cost and system complexity. In this paper, in the level of media services, we propose a negotiation approach to offer improved quality of media services. The proposed approach Constructs video distribution group between producer and consumer services, which target to globally minimize the concession of users' quality requirements Consequently, users can be provided video services in the level of conformation to the users' expectation.