• Proceedings of the IEEK Conference
• /
• 2000.06e
• /
• pp.167-170
• /
• 2000

In this paper, we develope a intelligent monitoring system of Coastal Ocean Environment based on WWW(World Wide Web) and PCS(Personal Communication System). This system have capability of real time processing of enviromental variable from various sensors. The system is composed of three part. The first part is mathematical modeling of real ocean. The second is construction server for real time web page. And the third is developing the measurement system which has wireless(PCS) interface to server.

• The KIPS Transactions:PartD
• /
• v.11D no.3
• /
• pp.709-716
• /
• 2004

This paper describes an intelligent real-time monitoring system of a semiconductor processing equipment, which determines normal or not for a wafer in processing, using multiple time-series pattern recognition. The proposed system consists of three phases, initialization, learning and real-time prediction. The initialization phase sets the weights and tile effective steps for all parameters of a monitoring equipment. The learning phase clusters time series patterns, which are producted and fathered for processing wafers by the equipment, using LBG algorithm. Each pattern has an ACI which is measured by a tester at the end of a process The real-time prediction phase corresponds a time series entered by real-time with the clustered patterns using Dynamic Time Warping, and finds the best matched pattern. Then it calculates a predicted ACI from a combination of the ACI, the difference and the weights. Finally it determines Spec in or out for the wafer. The proposed system is tested on the data acquired from etching device. The results show that the error between the estimated ACI and the actual measurement ACI is remarkably reduced according to the number of learning increases.

• Korean Journal of Bronchoesophagology
• /
• v.2 no.2
• /
• pp.194-199
• /
• 1996

Laser therapy is becoming an accepted procedure for tissue coagulation and ablation and is especially useful in treating tumors. The laser energy is applied to the tissue of interest through various delivery systems which are introduced percutaneously, via blood vessels, through body openings, or during surgical exposure of the tissue. One of the major obstacles to effective application of lasers has been the lack of reliable method to determine the extent of tissue involvement in real time. Several methods have been proposed for monitoring the tissue response and controlling the laser in real time during laser therapy. Among them, magnetic resonance imaging(MRI) has been introduced to monitor laser-tissue interactions because laser irradiation induces changes not only in the thermal motions of the hydrogen protons within the tissue but also in the distribution and mobility of water and lipids. The buttocks of New Zealand rabbits were treated by KTP and $CO_2$laser(power : 10 watts, exposure time:10 seconds). m images were taken at immediately after lasering, 1 week later, 2 weeks later, and at the same time, tissues were harvested for histopathologic study. We analyzed MR images and histopathologic findigs of laser-treated tissues. The MR images taken immediately after laser treatment showed 3 layer pattern and which was correlated with histopathologic changes. We suggest MRI may become a useful monitoring tools for laser-tissue interaction.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.22 no.4
• /
• pp.835-840
• /
• 2008

Acupuncture has long been contended to be effective in an ischemic stroke. A real-time monitoring of glutamate, an excitotoxin in the process of ischemic neuronal damage, in the striatum is tried in a rat model of global ischemia. Global ischemia was induced by the 11 vessel occlusion method for 10 minutes, during which acupuncture stimulation on GB34 and GB39 points was executed. Glutamate release in the rat striatum was monitored 256 times per second using real-time amperometric biosensor. Real time measurement data of 10 minutes prior to the induction of ischemia served as baseline data. Data acquisition continued for 30 minutes after the initiation of reperfusion. Peak concentration of glutamate release along with incidentally measured EEG and cerebral blood flow was compared between cases with and without acupuncture stimulation. Peak concentration of glutamate lowered when acupuncture stimulation was executed. A real time monitoring system of 11 vessel-occlusion induced global ischemia model was successfully established. The effect by acupuncture on acute global ischemia was successfully observed in this real-time monitoring setting, which may be one of the neuroprotective mechanism of acupuncture.

• Korean Journal of Remote Sensing
• /
• v.32 no.3
• /
• pp.323-330
• /
• 2016

Communication, Ocean and Meteorological Satellite (COMS) was launched in 2010 with three payloads that include Ka-band communication payload developed by Ministry of Science, ICT and Future Planning (MSIP) and Electronics and Telecommunications Research Institute (ETRI). This study introduces a real-time remote vessel monitoring system built in the Socheongcho Ocean Research Station using the Ka-band communication satellite. The system is composed of three steps; real-time data collection, transmission, and processing/visualization. We describe hardware (H/W) and software systems (S/W) installed to perform each step and the whole procedure that made the raw data become vessel information for a real-time ocean surveillance. In addition, we address functional requirements of H/W and S/W and the important considerations for successful operation of the system. The system is now successfully providing, in near real-time, ship information over a VHF range using AIS data collected in the station. The system is expected to support a rapid and effective surveillance over a huge oceanic area. We hope that the concept of the system can be fully used for real-time maritime surveillance using communication satellite in future.

• Proceedings of the KIEE Conference
• /
• 1999.11c
• /
• pp.739-741
• /
• 1999

This paper describes the fault monitoring system for lift type tower parking facilities. This system consists of tower parking facility control panel and monitoring computer, and offers real-time monitoring of parking status and fault detection, and status data acquisition of tower parking system using graphic user interface.

• Geomechanics and Engineering
• /
• v.8 no.2
• /
• pp.153-171
• /
• 2015

The observational method in tunnel engineering allows the evaluation in real time of the actual conditions of the ground and to take measures if its behavior deviates considerably from predictions. However, it lacks a consistent and structured methodology to use the monitoring data to adapt the support system in real time. The definition of limit criteria above which adaptation is required are not defined and complex inverse analysis procedures (Rechea et al. 2008, Levasseur et al. 2010, Zentar et al. 2001, Lecampion et al. 2002, Finno and Calvello 2005, Goh 1999, Cui and Pan 2012, Deng et al. 2010, Mathew and Lehane 2013, Sharifzadeh et al. 2012, 2013) may be needed to consistently analyze the problem. In this paper a methodology for the real time adaptation of the support systems during tunneling is presented. In a first step limit criteria for displacements and stresses are proposed. The methodology uses graphics that are constructed during the project stage based on parametric calculations to assist in the process and when these graphics are not available, since it is not possible to predict every possible scenario, inverse analysis calculations are carried out. The methodology is applied to the "Bois de Peu" tunnel which is composed by two tubes with over 500 m long. High uncertainty levels existed concerning the heterogeneity of the soil and consequently in the geomechanical design parameters. The methodology was applied in four sections and the results focus on two of them. It is shown that the methodology has potential to be applied in real cases contributing for a consistent approach of a real time adaptation of the support system and highlight the importance of the existence of good quality and specific monitoring data to improve the inverse analysis procedure.

• Proceedings of the KIEE Conference
• /
• 2007.10c
• /
• pp.229-231
• /
• 2007

The CCTV, closed circuit television, system is the most popular method to monitor some specific area. The CCTV-based monitoring system is composed of a lot of cameras installed the areas, and monitors to display the vision through the cameras. However, these systems have limitations to prevent some problems or to cope with the problems promptly, because they can carry out only the function that shows us the analogue images of the cameras. Especially, urban transit service area is the space where many people crowd in all at the same time and the space is not only wide but also distributed sporadically. This paper presents the efficient plan for video-based monitoring system to monitor urban transit service area. To build the efficient monitoring system, it is necessary to devide the monitoring area to appropriate sectors that should be composed to be displayed at a time. If the proposed method is used to construct the video-based monitoring system, the operating officers in the urban transit have the more direct and real images.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.03a
• /
• pp.1433-1437
• /
• 2010

The deep excavation work in Korean downtown is almost excuted near by existing structures and utility lines because of the diminution of available yard for construction. So, it was required more and more that the accurate control of displacement on the earth retaining system for minimizing the popular complaint and the damage from constructional accident. Automatic monitoring system is adopted in fracture zone for real time monitoring. In addition, Face mapping is carried out on the face of fracture zone according to excavation sequence. As the result of automatic monitoring system and face mapping, we was able to take the necessary reinforcement and changing excavation method within suitable time. This paper is informed about a stability case on the deep rock excavation site with fracture zone in urban area by automatic monitoring system.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.3 no.4
• /
• pp.20-29
• /
• 2004

A Tool wear monitoring system is indispensable for better machining productivity with guarantee of machining safety by informing the tool changing time in automated and unmanned CNC machining. Different from monitoring using other signals, the monitoring of spindle current has been used without requiring additional sensors on machine tools. For the reliable tool wear monitoring, current signal only of tool wear should be extracted from other parameters to avoid exhaustive analyses on signals in which all parameters are fused. In this paper, influences of force components of parameters on measured spindle current are investigated and a hybrid approach to cutting force regulation is employed for tool wear signal extraction in the spindle current. Finally, wear levels are verified with experimental results by means of real-time feedrate aspects changed to regulate the force component of tool wear.