• 지적과 국토정보
• /
• 제46권2호
• /
• pp.313-323
• /
• 2016

최근 "지적확정측량규정"이 제정되어 지적확정측량업무의 효율적이고 체계적인 추진을 도모하고 있다. 지적확정측량을 실시하기 위해서는 기적기준점을 설치하고 이를 기준으로 경계점에 대한 평면 직각종횡선좌표를 결정함으로써 높은 정확도와 경계복원성을 갖게 된다. 본 연구는 이번에 제정된 규정에서 지적기준점측량에 처음 도입되는 다중기준국 실시간이동측량관련 규정의 문제점과 세부측량에 있어서 예상되는 제도적인 문제점을 도출하였다. 이에 대한 개선방안으로 규정의 개정 및 가구점의 관리를 제시하였다. 이는 지진 등으로 지적공부에 등록된 경계와 지상의 위치에 차이가 발생할 경우 등에 있어서도 신속히 대처할 수 있다. 따라서 본 연구에서 제시한 가구점 관리를 통해 지적확정측량이 실시되면 지적공부의 공신력이 높아지고 경계분쟁의 사전예방 효과 등으로 사회적 비용을 절감할 수 있으므로 지적제도의 운영에 기여하는데 그 의미가 있다.

• 제어로봇시스템학회논문지
• /
• 제6권1호
• /
• pp.8-14
• /
• 2000

In this paper, three adaptive sliding mode control algorithms, which self-tune both the sliding mode gain and the boundary layer thickness, are proposed. The first algorithm uses a gain adaptation rule is combined with the boundary layer thickness adaptatioin rule to satisfy the sliding condition. In the third algorithm, the computation burden of the second algorithm is reduced further, and therefore no extra cost is required for real-time implementation. Due to the mixed sliding mode gain and the boundary layer thickness adaptation scheme, the tracking error and the chattering of the control input can be reduced greatly.

• 한국산업융합학회 논문집
• /
• 제25권6_2호
• /
• pp.969-977
• /
• 2022

Currently, in Korea, aerial photogrammetry is being studied for cadastral boundaries and numerical maps. Since the announced value of cadastral survey is closely related to ownership, the accuracy and reliability of the published value should be emphasized above all else. However, although aerial photogrammetry has great advantages in economic feasibility and surveying efficiency, it has many limitations when extracting the boundary of cadastral survey based on the acquired image. In order to improve these limitations, in this study, an aerial target was applied to obtain reliability improvement. Therefore, in order to examine the usefulness of aerial photogrammetry for cadastral survey application, cadastral boundary extraction and accuracy comparison analysis were conducted.

• Nuclear Engineering and Technology
• /
• 제32권3호
• /
• pp.244-253
• /
• 2000

A Simple Large Model (SLM), which can be used to make thermal calculation for a deep geological repository with finite number of HLW canisters, was developed. In order to develop the SLM, a Simple Basic Model (SBM), which will be a unit of the SLM, was optimized first. The SBM was optimized to achieve the same maximum buffer temperature as that of the Detailed Basic Model (DBM) representing the real geometric aspects of the repository. In contrast to the models with the assumption of infinite number of canisters which cannot consider boundary effect, the SLM can model the real repository with finite number of canisters and thus consider the boundary effect. Thermal results from the SLM can be used to evaluate the reliability of the models, which do not consider boundary effect. This model can also be used to simulate the thermal layout design and to analyze the thermal safety of a deep geological repository as well as an underground laboratory.

• 전자공학회논문지B
• /
• 제30B권7호
• /
• pp.92-101
• /
• 1993

This paper describes algorithms to extract license plates in vehicle images. Conventional methods perform preprocessing on the entire vehicle image to produce the edge image and binarize it. Hough transform is applied to the binary image to find horizontal and vertical lines, and the license plate area is extracted using the charateristics of license plates (the boundary information of license plates). Problems with this approach are that real-time processing is not feasible due to long processing time and that the license plate area is not extracted when lighting is irregular such as at night or when the plate boundary does not show up in the image. This research uses the gray level transition characteristics of license plates to verify the digit area by examining the digit width and the gray level difference between the background area the digit area, and then extracts the plate area by testing the distance between the verified digits. This research solves the probelm of failure in extracting the license plates due to degraded plate boundary as in the conventional methods and resolves the provlem of the time requirement by processing in real time such that practical application is possible.

• 대한전기학회논문지
• /
• 제34권6호
• /
• pp.230-237
• /
• 1985

Shortest path calculations for a large-scale network have to be performed using a decomposition techniqre, since the calculations require large memory size which increases by the square of the number of vertices in the network. Also, the calculation time increases by the cube of the number of vertices in the network. In the decomposition technique,the network is broken into a number of smaller size subnetworks for each of which shortest paths are computed. A union of the solutions provides the solution of the original network. In all of the decomposition algirithms developed up to now, boundary vertices which divide all the subnetworks have to be included in computing shortest paths for each subnetwork. In this paper, an improved algorithm is developed to reduce the number of boundary vertices to be engaged. In the algorithm, only those boundary vertices that are directly connected to the subnetwork are engaged. The algorithm is suitable for an application to real time computation using a parallel processor system which consists of a number of micro-computers or prcessors. The algorithm has been applied to a 39- vertex network and a 232-vertex network. The results show that it is efficient and has better performance than any other algorithms. A parallel processor system has been built employing an MZ-80 micro-computer and two Z-80 microprocessor kits. The former is used as a master processor and the latter as slave processors. The algorithm is embedded into the system and proven effective for real-time shortest path computations.

• Journal of Electrical Engineering and Technology
• /
• 제8권2호
• /
• pp.206-214
• /
• 2013

This paper proposes a new method for monitoring local voltage stability using the saddle node bifurcation set or loadability boundary in two dimensional power parameter space. The method includes three main steps. First step is to determine the critical buses and the second step is building the static voltage stability boundary or the saddle node bifurcation set. Final step is monitoring the voltage stability through the distance from current operating point to the boundary. Critical buses are defined through the right eigenvector by direct method. The boundary of the static voltage stability region is a quadratic curve that can be obtained by the proposed method that is combining a variation of standard direct method and Thevenin equivalent model of electric power system. And finally the distance is computed through the Euclid norm of normal vector of the boundary at the closest saddle node bifurcation point. The advantage of the proposed method is that it gets the advantages of both methods, the accuracy of the direct method and simple of Thevenin Equivalent model. Thus, the proposed method holds some promises in terms of performing the real-time voltage stability monitoring of power system. Test results of New England 39 bus system are presented to show the effectiveness of the proposed method.

• 대한토목학회논문집
• /
• 제28권6D호
• /
• pp.923-929
• /
• 2008

3차원 공간데이터에 대한 요구가 증가하면서 지형뿐만 아니라 건물에 대한 모형화는 아주 중요한 부분을 차지하고 있다. 본 연구에서는 라이다자료만을 이용하여 계산량과 사용자의 개입을 최소화한 건물의 경계를 추출하는 방법론을 제시하였다. 그 특징은 점기반처리와 영상기반처리의 장점을 융합하여 1차 건물의 경계를 개략적으로 검색한 후 다시 원 라이다 자료를 분석하여 제약조건이 부가된 불규칙삼각망을 형성하여 건물의 경계를 정하였다. 그 후 건물의 면적과 한 변의 길이 등을 고려하여 건물의 형상을 갖도록 처리하였다. 제안한 방법론은 실제 라이다자료를 이용하여 검증하였으며 수치지도와 비교를 통해서 효용성을 입증하였다.

• 한국항공운항학회지
• /
• 제18권2호
• /
• pp.16-22
• /
• 2010

This paper proposes the real-time moving object tracking system UAV using color information. Case of object tracking, it have studied to recognizing the moving object or moving multiple objects on the fixed camera. And it has recognized the object in the complex background environment. But, this paper implements the moving object tracking system using the pan/tilt function of the camera after the object's region extraction. To do this tracking system, firstly, it detects the moving object of RGB/HSI color model and obtains the object coordination in acquired image using the compact boundary box. Secondly, the camera origin coordination aligns to object's top&left coordination in compact boundary box. And it tracks the moving object using the pan/tilt function of camera. It is implemented by the Labview 8.6 and NI Vision Builder AI of National Instrument co. It shows the good performance of camera trace in laboratory environment.

• 한국대기환경학회지
• /
• 제9권3호
• /
• pp.242-246
• /
• 1993

Theoretically, spectral method has the highest accuracy among present numerical methods, but it is generally difficult to apply to complex terrains because of complex boundary conditions. Recently, spectral-element method, basically divide the domain into a set of rectangular subdomain and solve the equation at each subdomain, has been introduced. However, boundary conditions become more complex and requires more computing time, thus spectral-element method is not powerful for all complex terrain problems. In this paper, potential flow theory was intorduced to solve the air flows and diffusion phenomenon in the presence of terrain obstacles. Using the velocity potential-stream line orthogonal coordinate space, the diffusion problems of hilly terrain by pseudospectral method were solved and compared those with no terrain real scale solutions.