• KSBB Journal
• /
• 제11권1호
• /
• pp.58-64
• /
• 1996

K-carrageenan에 고정화시킨 Zymomonas mobilis를 이용한 연속적인 sorbitol 생산에 대하여 연구하였다. Toluene과 glutaraldehyde로 처리하여 투과성을 증대시킨 세포를 alginate나 chitin 고정화 공정에서 어느 정도의 효소활성을 보였으나 210시간 이상의 공정반응에서는 sorbitol 생성량이 감소되었다. 독성이 적고 투과성을 증가시키는 물질로서 toluene 대신 CTAB(Cetyltrimethylammoniumbromide)를 사용하였다. CTAB로 투과성을 증가시킨 세포를 k-carrageenan에 고정화하여 CSTR과 packed bed reactor를 이용하여 sorbitol 생산을 시도하였으며 CSTR보다도 (25일) packed bed reactor에서 (30일) 더 긴 시간 효소활성도가 유지되었다. Two-stage 연속공정에서는 희석비율이 (dilution rate, $h^{-1}$) 증가함에 따라서 sorbitol 생성률이 증가되었으며 희석비율 0.32 $h^{-1}$에서 첫번째와 두번째 반응조에서 각각 $15g/\ell-h,$ $22g/\ell-h의$ sorbitol 생성률을 얻었다. 0.32$h^{-1}$보다 높은 희석비율에서는 생성를이 감소되었다.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2002년도 학술대회 논문집
• /
• pp.326-329
• /
• 2002

The dc reactor type superconducting fault current limiter is composed of a power converter, magnetic core reactors and a do reactor that is a superconducting coil. When a fault occurs, the dc reactor maintains the stability of system by limiting its fault current. In this study, we focus on the design of the dc reactor using FEM(Finite Element Method). In order to design it, various elements should be considered such as magnetic field intensity, Lorentz's force, its inductance and so forth. Firstly, we forecast the values of those elements from the simulation of FEM and then measured with a copper wire magnet. Finally, verify the reliability of this FEM method by comparing with two results.

• Nuclear Engineering and Technology
• /
• 제55권9호
• /
• pp.3326-3333
• /
• 2023

The results of the analysis of a mathematical modeling for the IBR-2M pulsed reactor dynamics for a transition from a power pulse repetition frequency of 5 Hz-10 Hz are presented. The change in the amplitude response of the reactor for variable pulse delayed neutron fraction was studied. We used a set of power feedback parameters determined experimentally in 2021 at an energy output of 1820 MW·day. At a pulse repetition frequency of 10 Hz, the amplitude of pulse energy oscillations significantly depends on the value of the delayed neutron fraction in pulse β_p. Depending on β_p both suppression and amplification of reactor power fluctuations in the frequency ranges of 0.05-0.20 and 1.25-5.00 Hz can be realized.

• 한국환경과학회지
• /
• 제27권6호
• /
• pp.467-475
• /
• 2018

The lifetime of the electrode is one of the most important factors on the stability of the electrode. Since the lifetime of the DSA (Dimensionally stable anode) electrode is long, an accelerated lifetime test is required to reduce the test time. Beacuse there is no basis or standard method for accelerated lifetime testing, many researchers use different methods. Therefore, there is a need for basis and methods for accelerated lifetime testing that other researchers can follow. We designed a reactor system for accelerated lifetime testing and planned specific methods. Reactor system was circulating batch reactor. Reactor volume and cooling water tank were 12.5 L and 100 L, respectively. Electrode size was $2cm{\times}3cm$ (real electrolysis area, $5cm^2$). In order to maintain the harsh conditions, accelerated lifetime test was carried out in a high current density ($0.6A/cm^2$) and low electrolyte concentration (NaCl, 0.068 mol/L). Maintaining a constant temperature was an important operation parameter for exact accelerated lifetime test. As the accelerated lifetime test progressed, the active component of electrode surface was consumed and desorption occurred. At the point of 5 V rise, corrosion of the surface of the base material(titanium) also started.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제7권4호
• /
• pp.225-230
• /
• 2002

Experiments on deactivation kinetics of immobilized lipase enzyme from Candida cyl-indracea were performed in stirred bath reactor using rice bran oil as the substrate and temperature as the deactivation parameter. The data were fitted In first order deactivation model. The effect of temperature on deactivation rate was represented by Arrhenius equation. Theoretical equations were developed based on pseudo-steady state approximation and Michaelis -Menten rate expression to predict the time course of conversion due to enzyme deactivation and apparent half-life of the immobilized enzyme activity in PFR and CSTH under constant feed rate polity for no diffusion limitation and diffusion limitation of first order. Stability of enzyme in these continuous reactors was predicted and factors affecting the stability were analyzed.

• 대한전자공학회논문지
• /
• 제20권4호
• /
• pp.41-46
• /
• 1983

The current-fed DC-DC converter has only one energy storage reactor in series with the input for any number of outputs and is insensitive to transformer volt-second unbalance. It is considered that these properties of the converter are considerable advantages over other maltiple-output circuits. The steady-state and dynamic characteristic and stability for the current-fed DC-DC con-verter are analyzed in detail. The analysis is carried out by the state-space averaging method for the operation with the duty ratio less than 50% and is confirmed by the experiment. From the evaluation of stability it is identified that the stability of this converter is excellent as compared with that of the conventional buck type converter.

• Nuclear Engineering and Technology
• /
• 제47권1호
• /
• pp.94-101
• /
• 2015

This paper presents findings on the second-order sliding-mode controller for a nuclear research reactor. Sliding-mode controllers for nuclear reactors have been used for some time, but higher-order sliding-mode controllers have the added advantage of reduced chattering. The nonlinear model of Pakistan Research Reactor-1 has been used for higherorder sliding-mode controller design and performance evaluation. The reactor core is simulated based on point kinetics equations and one delayed neutron groups. The model assumes feedback from lumped fuel and coolant temperatures. The effect of xenon concentration is also considered. The employed method is easy to implement in practical applications, and the second-order sliding-mode control exhibits the desired dynamic properties during the entire output-tracking process. Simulation results are presented to demonstrate the effectiveness of the proposed controller in terms of performance, robustness, and stability.

• 생명과학회지
• /
• 제20권11호
• /
• pp.1656-1661
• /
• 2010

난황단백질 가수분해를 위한 알칼리성 단백질분해효소를 5가지 담체 Duolite A568, Celite R640, Dowex-1, Dowex 50W 그리고 Silica gel R60 에 고정화하였다. Duolite A568의 경우에 24.7%의 최대 고정화 효율을 나타내었다. 자유 효소와 고정화 효소에 대한 최적의 pH는 각각 8과 9였고, 최적의 pH는 고정화에 의해 염기성으로 1만큼 증가하였다. 그러나 최적 온도는 자유 효소와 고정화 효소 모두 $50^{\circ}C$로 같았다. 고정화 효소가 자유 효소에 비해 높은 열 안정성을 보였다. 재사용 회분식 공정에서 10 cycle 동안 효소활성은 초기 활성의 86%를 유지하였다. 연속 공정을 위한 충진층 반응기에서 여러 유속에 대한 장기 조업에서 효소 활성의 안정성 평가하였는데 낮은 유속일수록 높은 활성을 유지하였다. 연속 조업에서 casein과 난황 단백질을 사용하여 원료에 대한 고정화 효소의 활성에 대한 영향을 조사하였다. 96시간 연속 조업에서 casein의 경우는 초기 활성의 83%를 유지하였고 난황 단백질의 경우는 초기 활성의 61%를 유지하였다.

• 대한전기학회논문지
• /
• 제37권8호
• /
• pp.528-533
• /
• 1988

The miniturization of a DC-to-DC converter in connection with the stability is investigated in this paper. As both the capacitance of the smoothing capacitor and the inductance of the reactor are reduced by rasing the switching frequency, it is known that the stability of the buck converter declines with the switching frequency but the buck-boost converter has a nearly uniform stability. Furthermore, that the buck-boost converter is suitable for the miniturization of circuit is cleared in the high frequency region above a certain switching frequency.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 전기.전자공학 학술대회 논문집(I)
• /
• pp.824-827
• /
• 1987

The miniturization of a DC-DC converter circuit in connection with the stability is investigated in this paper. As both the capacitance of the smoothing capacitor and the inductance of the reactor are reduced by raising the switching frequency, it is known that the stability of the buck converter declines with the switching frequency but the buck-boost converter has a nearly uniform stability. Furthermore, that in the frequency region above a certain switching frequency the buck-boost converter is suitable for the miniturization of circuit is cleared.