• 자원환경지질
• /
• 제28권5호
• /
• pp.519-525
• /
• 1995

Recently, there have been several cases of serious accidents on concrete structure resulting from rapid deterioration of concrete strength. On the view point of long term stability of concrete, deterioration of concrete strength is mostly due to chemical reaction between alkali and reactive aggregates (alkali-aggreagte reaction; AAR) in concrete rather than a problem of execution. For long-term stability of concrete, concrete aggregates must be carefully selected. Some of rocks used for concrete aggregates contain deleterious minerals reactive to alkali components in concrete. Most of AAR result from chemical reaction between alkali components and reactive silica minerals in aggregates (so called alkali-silica reaction; ASR). The silica minerals are as follows; quartz with seriously distorted lattice structure, volcanic glass, chalcedony, opal, cristobalite, tridymite, etc. ASR may cause expansion and cracks, further collapse in concrete structure, in a few years. In case of crushed aggregates, only a part of rock mass without reactive minerals must be produced in aggregates mine after thorough examination of the distribution of rocks with reactive minerals. In case of natural aggregates, the total content of reactive minerals must be calculated, if, the content is more than 20%, the rate should be lower by mixing other non-reactive crushed- or natural aggregates. If it is obliged to use concrete aggregates all containing deleterious minerals in a discrete area, they must be used with low alkali cement Even if it is low quality in the chemical properties, aggregates with suitable range in the physical properties can be utilized as the aggregate of other purposes.

• 대한약학회:학술대회논문집
• /
• 대한약학회 2000년도 NEW STRATEGY FOR DRUG DEVELOPMENT IN POST-GENOMIC ERA(대한약학회)
• /
• pp.209.2-209.2
• /
• 2000

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.484.2-484.2
• /
• 2014

There are many efforts to improving the power conversion efficiencies (PCEs) of dye-sensitized solar cells (DSCs). Although DSCs have a low production cost, their low PCE and low thermal stability have limited commercial applications. This study describes the preparation of a novel multifunctional polymer gel electrolyte in which a cross-linking polymerization reaction is used to encapsulate $TiO_2$ nanoparticles toward improving the power conversion efficiency and long-term stability of a quasi-solid state DSC. A series of liquid junction dye-sensitized solar cells (DSCs) was fabricated based on polymer membrane encapsulated dye-sensitized $TiO_2$ nanoparticles, prepared using a surface-induced cross-linking polymerization reaction, to investigate the dependence of the solar cell performance on the encapsulating membrane layer thickness. The ion conductivity decreased as the membrane thickness increased; however, the long term-stability of the devices improved with increasing membrane thickness. Nanoparticles encapsulated in a thick membrane (ca. 37 nm), obtained using a 90 min polymerization time, exhibited excellent pore filling among $TiO_2$ particles. This nanoparticle layer was used to fabricate a thin-layered, quasi-solid state DSC. The thick membrane prevented short-circuit paths from forming between the counter and the $TiO_2$ electrode, thereby reducing the minimum necessary electrode separation distance. The quasi-solid state DSC yielded a high power conversion efficiency (7.6/8.1%) and excellent stability during heating at $65^{\circ}C$ over 30 days. These performance characteristics were superior to those obtained from a conventional DSC (7.5/3.5%) prepared using a $TiO_2$ active layer with the same thickness. The reduced electrode separation distance shortened the charge transport pathways, which compensated for the reduced ion conductivity in the polymer gel electrolyte. Excellent pore filling on the $TiO_2$ particles minimized the exposure of the dye to the liquid and reduced dye detachment.

• 청정기술
• /
• 제22권3호
• /
• pp.175-180
• /
• 2016

본 연구에서는, 저온 및 약산성 조건에서 높은 활성을 보이는 티로시나아제인 tyrosinase-CNK의 반응 안정성을 조사하였다. Tyrosinase-CNK는 지금까지 알려진 중온성(mesophilic) 및 호열성(thermophilic) 환경 유래의 티로시나아제 보다는 열 안정성이 낮았으나 0 ℃에서 효소 안정성이 매우 뛰어났고, 반복적인 동결-해동(freeze-thaw) 과정에서도 효소 활성을 안정적으로 유지하였다. 또한, 물과 ethanol 및 acetonitrile이 혼합된 유기용매 환경에서 초기 상대 활성 값의 변화가 관찰되었으나 유기용매 농도의 증가로 인한 추가적인 활성 저하를 유발하지 않고 활성을 일정하게 유지하였다. 한편, 효소 반응의 염(salt)에 대한 저해는 chaotropic 특성이 많이 나타나는 염일수록 적게 나타났다. 결과적으로, tyrosinase-CNK는 통상의 티로시나아제를 이용하여 반응을 수행하기 어려운 환경에서도 원하지 않는 반응을 억제하고 효소 불활성화를 최소화면서 반응을 촉매할 것으로 기대된다.

• 한국축산식품학회지
• /
• 제42권5호
• /
• pp.849-860
• /
• 2022

The myofibril protein (MP) isolate-saccharide graft reactions was prepared using the Maillard reaction with saccharides. The effects of various saccharides on protein functionality and quality of the Maillard reaction were investigated and compared with those of MP. The grafting degree of the MP isolate-saccharide graft reaction was significantly higher in the reducing sugar-treated groups (lactose, glucose, fructose, and palatinose). The browning intensity of the MP isolate-saccharide graft reaction with fructose, sucrose, and erythitol was higher than that observed in the control reaction (p<0.05). MP that reacted with reducing sugars (glucose, fructose, palatinose, and lactose) had fainter bands than MP that reacted with non-reducing sugars (sucrose, erythitol, trehalose, sorbitol, and xylitol). MPs conjugated with glucose exhibited higher protein solubility. The palatinose and lactose treatments were maximum in water binding capacity, though no significant difference in oil binding capacity among the saccharide treatments was observed. The emulsion stability of the MP isolate-saccharide graft reaction with palatinose and erythitol was higher than that of the control reaction. Therefore, reducing sugars have good protein functionality in the MP isolate-saccharides graft reaction.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.931-936
• /
• 1992

In operational pont of view, the batch reactor is quite different from the continuous reactor in that it is completely in unsteady states. This makes process variables swing over wide ranges and the process disclose its nonlinerarities. For the most part these nonlinearities are due to reaction heat. Accordingly it is very important to know the informations of reaction heat. This paper presents the method of reaction heat measurement in industrial batch reator which furnishes the limited measurable points. The informations of reaction heat are utilized in modeling of the batch reactor as well as deciding the stability and control variables.

• 한국항공운항학회지
• /
• 제23권4호
• /
• pp.140-145
• /
• 2015

An on-board reaction wheel is payload of small satellite for space environment test. The reaction wheel is designed for considering physical, electrical, and environmental requirements. In this paper, we report design, manufacturing process and operation performance verification. Furthermore, the specifications of environmental test are performed under environmental conditions for guarantee of stability and reliability. The operation and environment test results are presented to meet the requirements at the reaction wheel flight model.

• Carbon letters
• /
• 제23권
• /
• pp.48-54
• /
• 2017

This research considers the effect of added mesophase pitch (MP) as an additive during the pitch synthesis reaction of pyrolyzed fuel oil (PFO). Two effects are generated by adding MP. One is an enhancement of thermal stability due to the high thermal property of the additive; the other is that the volatile compounds that were removed by vaporization of PFO during the thermal reaction can participate in the pitch synthesis reaction ($PFO{\rightarrow}pitch$) more efficiently. The effect differs according to the amount of the additive. When the amount of the additive is less than 7 wt%, the first effect is dominant, whereas the second effect is dominant when the additive amount exceeds 10 wt%.

• 한국분말재료학회지
• /
• 제27권1호
• /
• pp.63-71
• /
• 2020

It is necessary to fabricate uniformly dispersed nanoscale catalyst materials with high activity and long-term stability for polymer electrolyte membrane fuel cells with excellent electrochemical characteristics of the oxygen reduction reaction and hydrogen oxidation reaction. Platinum is known as the best noble metal catalyst for polymer electrolyte membrane fuel cells because of its excellent catalytic activity. However, given that Pt is expensive, considerable efforts have been made to reduce the amount of Pt loading for both anode and cathode catalysts. Meanwhile, the atomic layer deposition (ALD) method shows excellent uniformity and precise particle size controllability over the three-dimensional structure. The research progress on noble metal ALD, such as Pt, Ru, Pd, and various metal alloys, is presented in this review. ALD technology enables the development of polymer electrolyte membrane fuel cells with excellent reactivity and durability.

• Journal of Microbiology and Biotechnology
• /
• 제1권3호
• /
• pp.197-201
• /
• 1991

Glycerolysis of triolein by lipase from Chromobacterium viscosum lipase was studied batchwise in AOT-isooctane reversed micelles. The reaction mixture was extracted with chloroform and the content of triolein, 1, 2-diolein, 1, 3-diolein, 1-monoolein, and free fatty acid in the condensed chloroform solution was determined using high performance liquid chromatography (HPLC). The effect of agitation speed on the initial rate of conversion was examined. As the speed of agitation increased up to 700 rpm, the reaction rate increased. However, above 700 rpm, the rate approached maximum and did not increase that much. The glycerolysis activity and the stability of the enzyme were affected by stirring and addition of histidine or copper. Addition of histidine and copper increased the rates of glycerolysis but they are detrimental to the operational stability in reversed micelles.