• Journal of the Korean Chemical Society
• /
• v.24 no.2
• /
• pp.150-154
• /
• 1980

Kinetic studies of the reaction of benzyl benzenesulfonate with pyridine in acetone were carried out by the electric conductivity method under 1 to 2000 bars and at 20 to $40^{\circ}C$. The rate increases with increasing pressure and temperature. The activation enthalpy $({\Delta}H^{\neq}),\;entropy\;({\Delta}S^{\neq})$ and activation volume $({\Delta}V^{\neq})$ of the reaction are obtained by the above experiment. The isokinetic relationship between $({\Delta}H^{\neq})\;and\;({\Delta}S^{\neq})$ for pressure change in the reaction was shown, and its isokinetic temperature was $342^{\circ}K$. From all of the above results it was found that this reaction precedes on the $S_N2$ reaction mechanism in which the rate of the reaction was determined by $C{\cdots}N$ bond formation at transition state.

• Journal of Environmental Science International
• /
• v.17 no.1
• /
• pp.97-105
• /
• 2008

This study examined the contaminated soils with an indicator of TPH using SVE (Soil Vapor Extraction) and biological treatments. Their results are as follows. Water content in the polluted soils slowly decreased from 15% during the initial experimental condition to 10% during the final condition. Purification of polluted soils by Bioventing system is likely to hinder the microbial activity due to decrease of water content. Removal rate of TPH in the upper reaction chamber was a half of initial removal rate at the 25th day of the experiment. The removal rate in the lower reaction chamber was 45% with concentration of 995.4 mg/kg. When the Bioventing is used the removal rate at the 14th day of the experiment was 53%, showing 7 day shortenting. Since the Bioventing method control the microbial activity due to dewatering of the polluted soil, SVE method is likely to be preferable to remove in-situ TPH. The reactor that included microbes and nutrients showed somewhat higher removal rate of TPH than the reactor that included nurtients only during experimental period. In general, the concentration showed two times peaks and then decreased, followed by slight variation of the concentration in low concentration levels. Hence, in contrast to SVE treatment, the biological treatment tend to show continuous repetitive peaks of concentration followed by concentration decrease.

• The Plant Pathology Journal
• /
• v.15 no.3
• /
• pp.168-171
• /
• 1999

Crude extracts of pathogenic Streptomyces turgidiscabies isolates produced necrotic reaction on potato slices. Necrosis was first visible 24 hr after application and increased in severity over several days. However, necrosis was not observed when crude extracts of nonpathogenic strains were applied onto tuber slices. Presence of thaxtomin A from crude extracts of pathogenic S. turgidiscabies was identified by thin layer chromatography and high performance liquid chromatography. Nonpathgenic strains did not produce thaxtomin A in oatmeal broth. Inoculation of potato tuber slices with thaxtomin A partially purified from crude extract of a pathogenic S. turgidiscabies ST5 reproduce necrotic reaction suggesting that thaxtomin A is a pathogenicity determinant in S. turgidiscabies.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.10
• /
• pp.10-18
• /
• 2006

In this thesis paper the effect that the change in the brightness of headlights has on a driver's perception had been researched. For this research, an indoor laboratory was constructed and designed. Then, a system to measure the reaction braking time of finding obstacle and the subject's brain waves after a moment of change in the headlamp's brightness was constructed. And before the real experiment was began, the trial experiment to decide test time, subject's rest time, detailed experimental steps, the headlamp's patterns of voltage change and an obstacle course was executed.

• Journal of ILASS-Korea
• /
• v.22 no.2
• /
• pp.96-102
• /
• 2017

In order to reduce the NOx, SCR technology is most suitable. In this study, we focused on studying the injector part of urea-SCR system. When stoichiometric 1 mole of urea is injected, 2 moles of $NH_3$ are created. $NH_3$ causes a SCR reaction by reacting with NOx. However, urea is decomposed by the side reaction of coming out HNCO, deposit formation is formed. In this study, it was to design a nozzle that can spray the optimal spray flow rate. Test nozzle used in this experiment is efferverscent type. The result of the experiment, liquid flow rate was confirmed to be that they are dominated by the exit orifice diameter. The area ratio is defined by ratio of the area of exit orifice hole and that of aerorator. The droplet size was measured by varying the area ratios. In addition, it was also confirmed that there is no change of the liquid flow rate and air flow rate to change the aerorator at the same exit orifice. Further, It was confirmed that the droplet size was relatively uniform even though the area ratio was different. Finally, there is little change in the SMD that air flow rate increases in 0.3 or more ALR.

• Nuclear Engineering and Technology
• /
• v.24 no.3
• /
• pp.219-227
• /
• 1992

An experiment was conducted to determine the reaction of boric acid with lime and the drying of its product using a reactor-dryer. no characteristics of dried products were observed. The major chemical species of dried Products was calcium borate of 2CaO.B$_2$O$_3$. From the particle size distribution of the dried products, it was found that quick lime was better than slaked lime as an additive. The Ca/B mole ratio of reaction was determined to be 3/4 considering the cohesion and agglomeration properties of dried products. The flowability of dried products up to 8 wt% of water content was acceptable for transport process and to reduce drying time.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.32 no.8
• /
• pp.574-581
• /
• 2008

The characteristics of combustion and flow for a lean premixed flame in lab-scale gas turbine combustor was studied through experiment and numerical analysis. From the experiment, flame structure and heat release rate were obtained from OH emission spectroscopy. Qualitative comparisons were made line-integrated OH chemiluminescence image and abel-transformed one. NOx analyzer was implemented to get the characteristic of NOx exhaust from the combustor. From the numerical analysis, the thermal distribution and characteristic of recirculation zone with the change of fuel-air mixing degree, the characteristic of methane distribution with equivalence ratio in the combustor respectively. Total heat release rate is increased with increasing equivalence ratio. Thermal Nox is reduced with increasing fuel-air mixing degree. Increasing equivalence ratio results in the decrease of the size of reaction zone and alteration of the position of the reaction zone into the entrance of the combustor.

• Food Science and Biotechnology
• /
• v.18 no.3
• /
• pp.788-792
• /
• 2009

Gamma $({\gamma})-irradiation$ can be used to control pathogens such as Vibrio vulnificus in seafood. The effects of irradiation on microbial cell populations (%) have been studied in order to develop detection methods for irradiated foods. The method used in this study was ethidium bromide monoazide (EMA) real-time polymerase chain reaction (PCR), using V. vulnificus specific primer, EMA, and $SYBR^{(R)}$ Green to discriminate between ${\gamma}-irradiated$ and non-irradiated cells. Confocal microscope examination showed that ${\gamma}-irradiation$ damaged portions of the cell membrane, allowing EMA to penetrate cells of irradidated V. vulnificus. ${\gamma}-Irradiation$ at 1.08 KGy resulted in log reduction ($-1.15{\pm}0.13$ log reduction) in genomic targets derived from EMA real-time PCR. The combination cold/heat shock resulted in the highest ($-1.74{\pm}0.1$ log reduction) discrimination of dead irradiated V. vulnificus by EMA real-time PCR.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2013.05a
• /
• pp.313-314
• /
• 2013

The study carried out the experiment with presenting as the fundamental data for developing non-cement by using red mud generated in blast furnace slag and bauxite generated in the process of manufacturing the pig iron process of manufacturing Al(OH)₃/Al₂O from as the binding material using the accelerator of NaOH. After fixing the thing and the NaOH adding the blast furnace slag and NaOH 10, 20, 30 (%) with 10, 20, 30 (%) substituted the red mud in the blast furnace slag and the experimental method carried out the experiment. And it measured the flexural strength and compressive strength and took a photograph EDS analysis and SEM. Consequently, the compressive strength was improved as the addition rate of the NaOH was high and the compressive strength according to the replacement ratio of the red mud was degraded. This is determined that film of the blast furnace slag is destroyed and it makes the hydration reaction condition and the intensity is revealed.

• Journal of the Korean Society of Combustion
• /
• v.21 no.2
• /
• pp.7-14
• /
• 2016

Evaporation and combustion characteristics of fuel droplet with carbon nanoparticle were investigated in a rapid compression machine(RCM). RCM is an experimental equipment to simulate one compression stroke of reciprocating engine. Nitrogen was charged into reaction chamber for evaporation experiment, while oxygen was charged for combustion experiment. N990 carbon black and n-heptane were used to synthesize the carbon nanofluids. Surfactant, span80, was used to make synthesis easier. The droplet pictures were taken using a high speed camera with 500 frames per second. Thermocouple, of which tip is $50{\mu}m$, was used not only to measure transient bulk temperature, but also to suspend the droplet. Reaction chamber temperature was calculated from pressure data. The evaporation rate of nanofluids was improved compared to pure fuel. The ignition delay was promoted due to the nanoparticle, but the burning rate was decreased.