• 한국염색가공학회지
• /
• 제9권3호
• /
• pp.18-26
• /
• 1997

Polyester microfiber fabrics were decomposed at 100, 110, and 12$0^{\circ}C$ in saturated CaO/ethylene glycol solutions(CaO/EG), and the characteristics of decomposition kinetics were discussed in comparison to those by hot aqueous hydroxide solution(NaOH). The Arrhenius pre-exponential factor(A) was 9.17x $10^{14}$/M $sec^{-1}$and the activation energy($E_{a}$) was 8.19kcal/mol. While the A value was 1.947x $10^{14}$/M $sec^{-1}$ and the ($E_{a}$ value was about 15~19kcal/mol in NaOH-PET decomposition reaction. The much higher A value of the CaO/EG-PET decomposition reaction means that CaO/EG-PET decomposition reaction will occur in a less selective fashion in comparison to the NaOH-PET decomposition reaction. On the other hand, the lower ($E_{a}$) value of the CaO/EG-PET decomposition reaction than that of the NaOH-PET decomposition reaction means that CaO/EG-PET decomposition reaction is less sensitive on the variation of temperature than NaOH-PET decomposition reaction.

• 한국세라믹학회지
• /
• 제54권5호
• /
• pp.443-447
• /
• 2017

The initial reaction of hexachlorodisilane ($Si_2Cl_6$, HCDS) on amorphous silica ($SiO_2$) surface for atomic layer deposition was investigated using density functional theory. Two representative reaction sites on the amorphous $SiO_2$ surface for HCDS reaction, a surface hydroxyl and a two-membered ring, were considered. The reaction energy barrier for HCDS on both sites was higher than its adsorption energy, indicating that it would desorb from the surface rather than react with the surface. At high temperature range, some HCDSs can have kinetic energy high enough to overcome the reaction energy barrier. The HCDS reaction on top of the reacted HCDS was investigated to confirm its self-limiting characteristics.

• 대한기계학회논문집B
• /
• 제32권8호
• /
• pp.636-644
• /
• 2008

The objective of this paper is to investigate characteristics of an autothermal reformer at various operating conditions. Numerical method has been used, and simulation model has been developed for the analysis. Pseudo-homogeneous model is incorporated because the reactor is filled with catalysts of a packed-bed type. Dominant chemical reactions are Full Combustion reaction, Steam Reforming(SR) reaction, Water-Gas Shift(WGS) reaction, and Direct Steam Reforming(DSR) reaction. Simulation results are compared with experimental results for code validation. Operating parameters of the autothermal reformer are inlet temperature, Oxygen to Carbon Ratio(OCR), Steam to Carbon Ratio(SCR), and Gas Hourly Space Velocity(GHSV). Temperature at the reactor center, fuel conversion, species at the reformer outlet, and reforming efficiency are shown as simulation results. SR reaction rate is improved by increased inlet temperature. Reforming efficiency and fuel conversion reached the maximum at 0.7 of OCR. SR reaction and WGS reaction are activated as SCR increases. When GHSV is increased, reforming efficiency increases but pressure drop from the increased GHSV may decrease the system efficiency.

• 한국수소및신에너지학회논문집
• /
• 제21권6호
• /
• pp.479-486
• /
• 2010

In order to confirm the effect of $HI_x$ solution on Bunsen reaction in Sulfur-Iodine thermochemical hydrogen production process, the reaction was investigated using $HI_x$ solution as a reactant. The phase separation characteristics of reaction with $HI_x$ solution were compared with the reaction using $I_2$ and $H_2O$ as reactants. Firstly, saturation points of $I_2$ in $HI_x$ solution at various temperatures were investigated to determine reaction conditions. With increasing temperature, the amounts of unreacted $I_2$ and $H_2O$ in $HI_x$ solution were increased, while impurities (HI in $H_2SO_4$ phase and $H_2SO_4$ in $HI_x$ phase) in each phase were decreased. The volumes of $H_2SO_4$ phase obtained from Bunsen reaction with $HI_x$ solution was relatively less than those obtained from the reaction with $I_2$ and $H_2O$. The difficulty of phase separation in Bunsen reaction using $HI_x$ solution may be due to the insufficient amount of $H_2O$ existed in $HI_x$ phase after reaction. Therefore, we concluded that the supplement amount of $H_2O$ should be calculated on the basis of the moles of HI and $H_2SO_4$ and added to the reaction system for good phase separation.

• Tribology and Lubricants
• /
• 제37권6호
• /
• pp.261-272
• /
• 2021

This study investigates the structural characteristics of oil-free, gas beam foil journal bearings (GBFJBs) for use in high speed motors. Mathematical modeling was carried out, and reaction force modeling for static load was performed to predict the structural characteristics of the GBFJB. Mathematical modeling and reaction force modeling for static load are performed to predict the structural characteristics of GBFJBs. The reaction force of the test bearing against static loads was measured during experiments and compared with the predicted results. The measured experimental data reveal the nonlinear stiffness characteristics of the GBFJB against varying displacement and agree well with the predictions. Dynamic load tests using an exciter allow to identify the vibration characteristics of the GBFJB. Test results show that the vibration displacement, dynamic force, and acceleration measured on the test bearing are most dominant at the applied dynamic load (synchronization) frequency. Futhermore, the test results show that the hysteresis area recorded during the dynamic tests increases with the excitation amplitude and frequency, and that the beam stick phenomena occurr at high excitation frequencies. The single degree of freedom (DOF) vibration model aids to identify the stiffness and damping coefficient of the GBFJB, which decrease as the excitation frequency increases.

• 농촌지도와개발
• /
• 제16권1호
• /
• pp.201-235
• /
• 2009

This study analyzed the demographic characteristics, strengths and weaknesses related to information acquisition of local innovation diffusion types. This study use ordered probit model to find strengths and weaknesses of innovation diffusion type in rural area. The individual characteristics of 'formal extension type', 'situational reaction diffusion type', 'agriculturist connection type', and 'systematic approach type', all differentiated according to innovation diffusion type, were analyzed. Following Choi & Choe(2008), immediacy, accessibility, referability, applicability, and satisfaction were the highest in the situational reaction diffusion type, systematic approach type, formal extension type, and farmers connection type, in the order. And there existed organic contexts among individual characteristics. So this study tried to analyze strengths and weaknesses of innovation diffusion type with a focus on immediacy, which emerged as the most important variable in the process of interpreting innovation diffusion. And the strengths and weaknesses of each innovation diffusion type were presented.

• 도시과학
• /
• 제11권1호
• /
• pp.21-28
• /
• 2022

Raman spectroscopy is effective to investigate functional groups via molecular vibration. The technique offers the structural information of compounds including subtle changes in the chemical composition of local atomic coordination without critical damage. Thus, the effect of carbonation on the hydration characteristics of Portland cement under pre-curing conditions for carbonation was investigated via Raman spectroscopy in the present study. Gaseous CO₂ was injected within 60 seconds, and the reaction time was varied from 0 minute to 90 minutes. The test results indicated that the Ca/Si ratio of C-S-H reduced immediately after mixing and then the C-S-H with a relatively high Ca/Si ratio coexisted as the reaction time increased. The calcium carbonates formed in the present study included calcite and amorphous calcium carbonates. The test results via Raman spectroscopy provide valuable information about the carbonation characteristics of OPC under pre-curing conditions for carbonation.

• 한국조리학회지
• /
• 제18권4호
• /
• pp.209-221
• /
• 2012

본 연구는 분자요리 기법인 spherification 기법을 이용하여 감(Diospyros kaki)을 구형화시켜 염화칼슘의 농도와 반응시간에 따른 감 칼슘 알지네이트 비드의 물리적 및 관능적 특성을 연구하였다. 염화칼슘의 농도(0.5, 0.75, 1.0 %)와 겔화 반응시간(2, 4, 6, 8, 10 min)에 따른 감 칼슘 알지네이트 비드의 색도 측정결과, 염화칼슘의 농도와 반응시간이 증가될수록 명도와 황색도는 감소하고 적색도는 증가하였다. 부착성을 제외한 경도, 탄력성, 씸힙성, 응집성, 복원성은 염화칼슘의 농도와 반응시간이 증가될수록 증가하는 경향을 보였다. 비드의 막 두께와 형태의 분석결과 염화칼슘의 농도와 반응시간이 증가할수록 비드의 감퓨레 속에 있는 염화칼슘과 소디움 알지네이트의 반응이 활발해져 막 두께가 두꺼워지는 경향을 나타냈다. 정량적 묘사분석 결과 염화칼슘의 농도와 반응시간이 증가할수록 입체감, 탄력성, 단단함, 씹힘성, 잔여감은 모두 증가하였으며, 노란정도, 투명성은 증가할수록 감소하는 경향을 보였다. 기호도 검사 결과 색상, 향, 맛에서는 염화칼슘의 농도와 반응시간에 따른 유의적 차이를 보이지 않았으나 질감과 전반적인 기호도에서는 염화칼슘 0.5%의 Control 시료가 가장 높은 평가를 받았다. 칼슘 알지네이트 비드의 물리적 관능적 특성에 염화칼슘의 농도와 반응시간이 영향을 끼침을 알 수 있다.

• 항공우주기술
• /
• 제13권2호
• /
• pp.47-53
• /
• 2014

본 논문은 위성의 정밀 자세제어를 위해 사용하는 반작용 휠에 대한 소프트웨어 모델을 시뮬링크로 구현한 것에 대한 소개문서이다. 반작용 휠의 전기적인 특성 파라미터를 셋팅하고, 위성에 반작용 휠들이 장착되는 장착 각을 설정할 수 있는 기계적인 항목들 또한 포함하고 있다. 반작용 휠의 모델 방정식을 전기적 모터 방정식으로부터 유도하여, 이를 정리하였다. 또한, 구현한 반작용 휠 시뮬링크 모델을 강체에 적용하여 구동결과를 보여주고 있다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 추계학술대회 초록집
• /
• pp.91.1-91.1
• /
• 2010

The Reforming system is an effective method to generate hydrogen which uses for fuel cell system. The purpose of this study is to present characteristics of an autothermal reformer at various operating conditions and to investigate ideal conditions for reforming efficiency. Dominant chemical reactions are Full Combustion, Steam Reforming reaction, Water-Gas Shift reaction and Direct Steam Reforming reaction. Operating parameters of the autothermal reformer are inlet temperature, Oxygen to Carbon Ratio, Steam to Carbon Ratio and Gas Hourly Space Velocity. Autothermal reformer is filled with catalysis of a packbed-bed type. Using numerical approach, we have investigated on various reaction conditions.