• Transactions on Electrical and Electronic Materials
• /
• v.15 no.2
• /
• pp.77-80
• /
• 2014

The effect of reactive diluents on the ac electrical treeing in epoxy/nanosilicate systems was studied, in a needle-plate electrode geometry. Diglycidyl ether of bisphenol A (DGEBA) type epoxy was used as a base resin, and layered silicate was used as a nano-sized filler. Polyglycol (PG) or 1,4-butanediol diglycidyl ether (BDGE) was introduced as a reactive diluent to the DGEBA/nanosilicate system, in order to decrease the viscosity of the nanocomposite system. PG acted as a flexibilizer, and BDGE acted as a chain extender, after the curing reaction. To measure the treeing propagation rate, a constant alternating current (ac) of 10 kV/4.2 mm (60 Hz) was applied to the specimen, in a needle-plate electrode arrangement, at $30^{\circ}C$ of insulating oil bath. When 10 kV/4.2 mm (60 Hz) was applied, the treeing propagate rate in the DGEBA system was $1.10{\times}10^{-3}$ mm/min, and that in the DGEBA/PG system was $1.05{\times}10^{-3}$ mm/min. As 1.5 wt% of nanosilicate was added to the DGEGA/PG system, the propagation rate was $0.33{\times}10^{-3}$ mm/min. This meant that the nano-sized layered silicates would act as good barriers to treeing propagation. The effect of chlorine content was also studied, and it was found that chlorine had a bad effect on the electrical insulation property of the epoxy system.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.9
• /
• pp.1344-1351
• /
• 2004

This study develops a haptic display model which is an indispensable for the force generation in the virtual environment. In developing the haptic display model, a Proxy concept and a Karnopp friction model are utilized to generate the reaction force and the friction force. Also this study develops a 2 D.O.F. remote wiping system. This system is composed of a 2 D.O.F. master manipulator, a force sensor equipped 2 D.O.F. slave manipulator and a real time controller. With the developed remote wiping system, this study identifies the friction characteristic of the aluminum, acryl and rubber plate. The results are used as the dynamic friction coefficient of the haptic display model. This study shows the efficiency of the developed haptic display model by the comparison between the friction characteristic of the haptic display with the developed haptic display model and the friction characteristic of the real aluminum, acryl and rubber plate.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.2
• /
• pp.124-128
• /
• 2017

Sprinklers are a necessary device for the early suppression of fires to prevent large fires. The installation has been obligatory for certain buildings recently through the digestion method. In an aging building, it is difficult to find sprinklers, because of their significant cost, long installation times, and they require installation by experts. That is why we are able to install all, was designed with enough independent integrated sprinklers with fire-extinguishing capabilities. The designed sprinklers are fitted with a conventional sprinkler head in a container of 20cm * 20cm * 10cm. Inside the container and potassium carbonate, which warms the rubber material and the plate line by pressing the potassium carbonate, the line weight is a 5kg pressing plate at the entrance at the pressure of 0.5Mpa when operating. The glass sprinkler valve blocking the entrance at about $68^{\circ}C$ is operated open. At this time, the potassium out of the digestive fire to combustible materials and heat off a chain reaction.

• Journal of Environmental Health Sciences
• /
• v.23 no.3
• /
• pp.1-6
• /
• 1997

This research was conducted in the laboratory to investigate an alternative of Copper(Cu) removal from an heavymetal wastewater using the electrochemical precipitation(ECP) process. The ECP unit consisted of an electrolytic cell made of Titanium plate and Steel plate representing anode and cathode. The DC power source applied to the ECP unit had electrical potential(E) of 50$\pm$ 1V, respectively. The synthetic wastewater used in the experiments contained Cu in the 10 mg/l concentration and the electrode separation were 2, 3, 4 cm and the initial pH were 3, 6, 9, 12, and electrolytic concentration were 0.005, 0.0125, 0.025, 0.0375 mole, and the real heavymetal wastewater used in the experiments. From the experiment for removal efficiency according to pH variation, the low pH area doesn't give the coagulation effect by Ti(OH)$_4$ because process interfere with the coagulation and oxidation reaction, therefore the optimum pH was 4-7. The removal rate was 97.75% after the lapse of 30 minutes when copper concentration and electrolytic concentration were respectively 10 mg/l and 0.025 mole. The removal rate was 96.41% after the lapse of 30minutes when the real heavymetal wastewater used. The optimum consumption of power showed 27KWh/m$^3$ when copper concentration, electrolyte concentration and cell potential were respectively 10 mg/l, 0.025 mole and 50$\pm$ 1 Volt.

• Advances in Traditional Medicine
• /
• v.7 no.4
• /
• pp.390-394
• /
• 2007

The present study was conducted to evaluate the analgesic activity of ethanolic extract of Andrographis paniculata (AP) in mice. The analgesic investigations were carried out using the acetic acid-induced abdominal writhing and the hot-plate tests. It was demonstrated that intraperitoneal (i.p.) administration of the extract at a dose of 30, 100, 300, 500 mg/kg, produced significant inhibition of abdominal constriction induced with 0.6% (v/v) acetic acid in dosedependent manner. It also demonstrated that the extract produced significant dose-dependent increase in the time of latency to a discomfort reaction in the hot-plate model. In addition, the analgesic effect of the ethanolic extract of AP was significantly reversed by a non-specific opioid receptor antagonist, naloxone. These results indicate that AP has an analgesic effect that was mediated through opioid receptors.

• BMB Reports
• /
• v.35 no.3
• /
• pp.262-266
• /
• 2002

A non-isotopic neutravidin-based reverse transcriptase (RT) assay adapted for high throughput screening of HIV activity is described. Using a 96-well microtitre plate, HIV particles are lysed and the RT enzyme released into a reaction mixture containing poly(A) RNA, biotinylated oligo d(T) and fluorescein-labelled dUTP (FI-dUTP). With poly(A) as a template and oligo d(T) as primer, the viron RT incorporates FI-dUTP into an elongating DNA strand. The resulting product is captured on a neutravidin-coated 96-well plate and the unincorporated nucleotides removed by a series of washing steps. A simple ELISA is subsequently performed using a monoclonal antifluorescein antibody conjugated to alkaline phosphatase. Quantification of RT activity is facilitated by a colorimetric readout. The assay was validated in the context of a diagnostic HIV-1 phenotyping assay. Using supernatants from HIV-1 infected lymphocyte cultures the assay was shown to be as sensitive as a radioactive assay and the RT activity correlated well with levels of cell-asociated HIV-p24. Importantly, even minor reductions of RT activity by virus variants with reduced fitness could be distinguished.

• Structural Engineering and Mechanics
• /
• v.65 no.3
• /
• pp.213-222
• /
• 2018

The purpose of this paper is to study free vibration analysis of thick plates resting on Winkler foundation using Mindlin's theory with shear locking free fourth order finite element, to determine the effects of the thickness/span ratio, the aspect ratio, subgrade reaction modulus and the boundary conditions on the frequency paramerets of thick plates subjected to free vibration. In the analysis, finite element method is used for spatial integration. Finite element formulation of the equations of the thick plate theory is derived by using higher order displacement shape functions. A computer program using finite element method is coded in C++ to analyze the plates free, clamped or simply supported along all four edges. In the analysis, 17-noded finite element is used. Graphs are presented that should help engineers in the design of thick plates subjected to earthquake excitations. It is concluded that 17-noded finite element can be effectively used in the free vibration analysis of thick plates. It is also concluded that, in general, the changes in the thickness/span ratio are more effective on the maximum responses considered in this study than the changes in the aspect ratio.

• Journal of the Korean Applied Science and Technology
• /
• v.25 no.4
• /
• pp.485-494
• /
• 2008

The acrylic coating emulsions were prepared by the emulsion polymerization to protect the surface of steel plate from the corrosion chemicals like acid, base and salt water. MMA(methyl methacrylate), styrene, BA(butyl acrylate), and 2-HEMA(2-hydroxyethyl methacrylate) were used as monomer. KPS(potassium persulfate) and SBS(sodium bisulfite) as redox initiator and SDBS(sodium dodecylbenzene sulfonate) as emulsifier were used on the emulsion polymerization reaction. The most stable in-situ coating was obtained when 10% of MMA was added. Both particle size and quantity in emulsion were decreased as increasing the mount of SDBS. the most stable prepared coating emulsion with polyisocyanate crosslinker showed very high anticorrosion properties on the coated steel layer to salt water, whereas no significant improvement of anticorrosion property to acdic and basic condition it showed.

• Advances in Traditional Medicine
• /
• v.9 no.3
• /
• pp.232-237
• /
• 2009

The effect of arogh, a polyherbal formulation-PHF [each 3 g powder contained Nelumbo nucifera G. (0.24 g), Hemidesmus indicus R. (0.24 g), Zingiber officinale R. (0.24 g), Terminalia chebula R. (0.24 g), Quercus infectoria O. (0.12 g), Hibiscus rosa-sinensis L. (0.24 g), Rosa damascene M.(0.24 g), Eclipta alba H.(0.24 g), Glycyrrhiza glabra L. (0.24 g)] was investigated in various experimental models of pain and inflammation. Analgesic activity of PHF was studied in mice using acetic acid induced writhing, tail immersion and hot plate methods. Anti-inflammatory activity of PHF was studied in rats using carrageenan induced hind paw edema and formalin induced rat paw edema methods. PHF significantly (P < 0.05) reduced the number of writhings, increased latency to flick tail in tail immersion method and elevated the mean basal reaction time in hot plate method. PHF significantly (P < 0.05) inhibited carrageenan induced hind paw edema and formalin induced rat paw edema. The PHF was tested at dose of 30, 100, 300 and 500 mg/kg.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.1066-1069
• /
• 2002

Dynamic postural control varies with the environmental context, specific task and intentions of the subject. In this paper, dynamic postural control against forward-backward perturbations of a platform was estimated using tri-axial accelerometers and a force plate. Ten young healthy volunteers stood upright in comfortable condition on the perturbation system which was controlled by an AC servo motor. With anterior-posterior perturbations, movements of ankle, knee and hip Joints were obtained by tri-axial accelerometers. and ground reaction forces with corresponding displacements of the center of pressure(CoP) by the force plate. The result showed that the ankle moved first and the trunk forward, which implies that the mechanism of the dynamic postural control in forward-backward perturbations, occurred in the procedure of the ankle, the knee and the hip. Knee flexion and hip extension in the period of acceleration, constant velocity and deceleration phase is very important fur the balance recovery. These responses depends on the magnitude and timing of the perturbation. From the present study the accelerometry-system appears to be a promising tool for understanding kinematic accelerative In response to a transient platform perturbation. A more through understanding of balance recovery mechanism may aid in designing methods for reducing falls and the resulting injuries.