• 제어로봇시스템학회논문지
• /
• 제1권2호
• /
• pp.99-104
• /
• 1995

For the robust control, sliding mode control has gained a great attention. Sliding mode control has the good robustness, because it makes the state of system reach the origin of the state space, by a varying the structure of system on the sliding surface. The slope of sliding surface affects to the control performance. If it is small, robustness is increased at the expense of reaching time. On the contrary, if it is large, reaching time is decreased at the expense of robustness and overshoot. In this paper, to design the optimal sliding surface, optimal control theory is introduced. To confirm the validity of the proposed method, the position control of step motor is implemented.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.338-338
• /
• 2017

One of the problems in increasing rice production is getting lines or varieties that have high adaptability so that able to produce maximum production in a variety of environmental conditions. One strategy that can be done to get adaptive varieties is through the improvement of native varieties. This research was conducted in rain fed paddy field, Aceh province, Indonesia from June to September 2014. The texture of the soil was clay-loam with the soil pH ranged from 6.5-6.7. Five potential progenies of rice from crossing between native Indonesian rice with introduced rice varieties consist of C3, C4, S3, S5, S6 were used in this study. Besides that, one national rice variety Ciherang also used as a comparison. The plants were growth in the plot with the size of $2m{\times}1.4m$ with plant distance was $20cm{\times}20cm$. The fertilizers used in this study were Urea, NPK, and KCl. Randomized block design with 6 rice progenies/variety and 3 replications were used in this study. There were 18 experimental units and each experimental unit had 10 samples for the sources of data. The variables that were observed in this study including plant height at harvesting time, number of productive tiller, the percentage of empty grains and filled grain per panicle, weight of filled grains per hill, weight of filled grain per plot and yield potential per hectare. Analyzed were also conducted for the depth of root penetration, dry-root weight, dry-shoot weight, shoot-root weight ratio and its correlation with the weight of filled grain per hill. The research results show that there was significant difference on plant height at harvesting time, number of productive tillers, the percentage of empty grains and filled grain per panicle, weight of filled grains per hill, weight of filled grain per plot and yield potential per ha (p>0.01) among the treatments. In addition, depth root penetration, dry-root weight, dry-shoot weight, shoot-root weight ratio also had significant difference (p>0.01) among the treatment. The highest plant at harvesting time was found in S6, reaching 129.8 cm and the shortest plants was found in C3 reaching 107.5 cm. The largest number of productive tillers and the highest percentage of filled grains per panicle were found in Ciherang reaching 10.5 tillers and 80.7% respectively. Ciherang also had the heaviest weight of filled grains per hill and per plot reaching 21.1 g and 2.18 kg respectively. Whereas, S6 had the lowest number of tillers and the lowest percentage of filled grain per panicle.. The highest yield potential per ha was found in Ciherang reaching 7.79 tons. Among the progenies, S5 had the highest yield potential reaching 5 tons/Ha. The result also showed significant relationship between shoot-root weight ratio with weight of filled grains per hill. The highest value of shoot-root weight ratio (1.57) in Ciherang is thought had closed relationship with its yield potential.

• 재활치료과학
• /
• 제7권3호
• /
• pp.79-88
• /
• 2018

목적 : 본 연구의 목적은 뇌졸중 환자를 대상으로 환측 상지에 진동자극을 적용했을 때, 팔 뻗기 수행에서 나타나는 팔꿈치 움직임의 운동학적 변화를 관찰하기 위함이다. 연구방법 : 연구 설계는 단일집단 교차실험설계(one-group cross-over trial design)를 사용하였으며, 10명의 만성 뇌졸중 환자를 대상으로 하였다. 대상자의 환측 위팔두갈래근(biceps brachii)에 국소 진동자극을 5분, 10분, 20분 동안 무작위로 70Hz로 적용한 후, 3차원 동작분석 시스템을 통해 팔 뻗기 수행의 운동학적 움직임을 분석하였다. 종속변수에는 팔꿈치 움직임에서 나타나는 최대 각 속도, 최대 각속도까지의 시간, 움직임 단위를 포함하였다. 결과 : 팔 뻗기를 수행함에 있어서 팔꿈치의 움직임은 20분 동안 국소 진동자극을 적용하였을 때 보다 빠르고 부드러워졌으며, 효율적으로 나타났다. 팔꿈치 움직임의 최대 각속도는 증가하였고(p<0.05), 최대 각속도까지의 시간과 운동단위는 유의하게 감소하였다(p<0.05). 결론 : 국소 진동자극은 편마비 뇌졸중 환자가 팔 뻗기 움직임을 수행함에 있어 발생하는 운동학적 구성요소를 향상시킬 수 있는 효과적인 방법일 될 수 있다.

• 전자공학회논문지SC
• /
• 제37권3호
• /
• pp.72-83
• /
• 2000

본 논문에서는 리칭모드 제어기와 신경 회로망을 이용하여 3상 유도전동기의 위치제어 시스템을 구현한다. 리칭모드 제어기는 위치오차와 속도오차의 궤적을 슬라이딩 평면으로 들어가도록 하고 신경회로망의 초기학습을 담당한다. 리칭모드 제어기의 구조는 슬라이딩 평면의 스위칭 함수로부터 간단히 구성하였다. 또한, 신경 회로망은 전향경로 신경망으로 구성되며 비선형 매핑능력과 탁월한 학습능력을 이용하여 유도전동기의 등가제어입력을 학습하도록 하였고 신경 회로망의 입력으로는 모터의 기준속도, 기준위치 및 엔코더를 이용하여 측정된 모터의 실제속도와 위치 등을 이용하였고 온라인 상태로 학습되도록 하였다. 이와 같이 복합적으로 구성된 제어기들을 유도전동기의 위치제어 시스템에 적용하였다. 본 논문에서 제안된 알고리즘의 타당성을 보이기 위해 기존의 PI 제어기와 비교평가를 하였으며 시뮬레이션과 실험결과로부터 초기운전 상태에서는 리칭모드 제어기가 주로 제어를 담당하지만 시간이 지남에 따라 신경회로망이 학습되어 신경 회로망이 주 제어기가 됨을 확인하였다. 아울러, 제안된 제어기가 PI 제어기보다 우수하고 특히 부하변동과 같은 외란에 강인함을 알 수 있었으며, 정상상태 오차가 현저히 감소하여 정밀한 제어가 가능함을 확인하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.75.2-75
• /
• 2002

$\textbullet$ Sliding mode controller using new discrete reaching laws $\textbullet$ Time-delay control $\textbullet$ Global Uniform Ultimate Bounedness

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.771-774
• /
• 1996

This paper presents a continuous time varying sliding surface that allows faster tracking and really guarantees robust contro land smooths control inputs. And this method is evaluated by applying to robot manipulator.

• 한국정보통신학회논문지
• /
• 제6권8호
• /
• pp.1269-1275
• /
• 2002

이 논문은 Bell형 스위칭 함수를 이용하여 가변구조제어계의 도달 기간을 제거하기 위한 새로운 방법을 제공한다. 제안된 방법에 의해 전체 과정동안 도달 기간이 제거된다. trapezoidal형 브러쉬리스 DC 모터의 효과적인 속도 제어를 위해 시변 스위칭 함수를 사용하여 속도 제어기를 구성하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.57-60
• /
• 2001

This paper presents a new method for removing reaching phase in variable structure control systems using Bell type switching function. By proposed method, during the entire control process reaching phase is removed. For effective speed control of trapezoidal type brushless DC motor, a time varying switching function based speed controller is developed as illustration.

• Journal of Power Electronics
• /
• 제19권2호
• /
• pp.549-559
• /
• 2019

This paper proposes an adaptive sliding mode control (ASMC) strategy with an enhanced optimal reaching law (EORL) for the robust current tracking control of the boost converter based hybrid power source (HPS) in an electric vehicle (EV). A conventional ASMC strategy based on state observers and the hysteresis control method is used to realize the current tracking control for the boost converter based HPS. Then a novel enhanced exponential reaching law is proposed to improve the ASMC. Moreover, an enhanced exponential reaching law is optimized by particle swarm optimization. Finally, the adaptive control factor is redesigned based on the EORL. Simulations and experiments are established to validate the ASMC strategy with the EORL. Results show that the ASMC strategy with the EORL has an excellent current tracking control effect for the boost converter based HPS. When compared with the conventional ASMC strategy, the convergence time of the ASMC strategy with the EORL can be effectively improved. In EV applications, the ASMC strategy with the EORL can achieve robust current tracking control of the boost converter based HPS. It can guarantee the active and stable power distribution for boost converter based HPS.

• Journal of Biosystems Engineering
• /
• 제33권1호
• /
• pp.21-29
• /
• 2008

In this study, the thermal properties of peeled chestnuts were measured, and the mathematical prediction model of freezing time was also developed for various interior positions from center to rind (surface). The measured thermal properties were showed that heat conductivity is $0.43W/m^{\circ}C$, specific heat is $2.7206J/m^3^{\circ}C$, latent heat is $216.9{\times}10^6J/m^3$ and freezing point is $-2.8^{\circ}C$. The entire process about reaching to the freezing time of peeled chestnuts was analyzed with its each regular depth position using the finite difference method (FDM) based on computer simulation. In case of regular freezing temperature, it was showed an that surface (rind) position is more rapidly reached into the freezing point rather than the center position, and also reaching time to the freezing point is more fast at the lower freezing temperature. Comparison results between simulation and experiments showed linear relationship. In regularly varying condition for freezing temperature, this method would give an information to predict a freezing time of the interior points for peeled chestnuts and more similar agricultural products.