• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.182-182
• /
• 2009

The effect of Re-oxidation on the PTCR properties of Sm-doped barium titanate ceramics was investigated by means of impedance spectroscopy. Electrical properties such as resistance vs. temperature, I-V curve were measured and microstructure was observed with SEM photography. Sample was fabricated with thick film process such as tape casting of green sheet, screen printing of electrode pattern, stacking, firing in reduced atmosphere and re-oxidation, etc. As the temperature of re-oxidation increases, resistance jump as a function of temperature enhances but resistance at room temperature increases. These behavior of resistance as a function of temperature, dependent on the re-oxidation condition, is analyzed with Cole-Cole impedance plot and is shown to be related with the degree of oxidation of grain boundary regardless of grain core during re-oxidation process of sample.

• 한국결정성장학회지
• /
• 제14권2호
• /
• pp.47-49
• /
• 2004

Gate protection $SiN_x$ as an alternative to a conventional re-oxidation process in Dynamic Random Access Memory devices is investigated. This process can not only protect the gate electrode tungsten against oxidation, but also save the thermal budget due to the re-oxidation. The protection $SiN_x$ process is applied to the poly-Si gate, and its device performance is measured and compared with the re-oxidation processed poly-Si gate. The results on the gate dielectric integrity show that etch damage-curing capability of protection $SiN_x$ is comparable to the re-oxidation process. In addition, the hot carrier immunity of the $SiN_x$ deposited gate is superior to that of re-oxidation processed gate.

• 한국전기전자재료학회논문지
• /
• 제26권2호
• /
• pp.98-103
• /
• 2013

The alumina substrates that Ni electrode was printed on and the multi-layered PTCR thermistors of which composition is $(Ba_{0.998}Ce_{0.002})TiO_3+0.001MnCO_3+0.05BN$ were fabricated by a thick film process, and the effect of re-oxidation temperature on their resistivities and resistance jumps were investigated, respectively. Ni electroded alumina substrate and the multi-layered PTC thermistor were sintered at $1150^{\circ}C$ for 2 h under $PO_2=10^{-6}$ Pa and then re-oxidized at $600{\sim}850^{\circ}C$ for 20 min. With increasing the re-oxidation temperature, the room temperature resistivity increased and the resistance jump ($LogR_{290}/R_{25}$) decreased, which seems to be related to the oxidation of Ni electrode. The small sized chip PTC thermistor such as 2012 and 3216 exhibits a nonlinear and rectifying behavior in I-V curve but the large sized chip PTC thermistor such as 4532 and 6532 shows a linear and ohmic behavior. Also, the small sized chip PTC thermistor such as 2012 and 3216 is more dependent on the re-oxidation temperature and easy to be oxidized in comparison with the large sized chip PTC thermistor such as 4532 and 6532. So, the re-oxidation conditions of chip PTC thermistor may be determined by considering the chip size.

• Asian-Australasian Journal of Animal Sciences
• /
• 제19권5호
• /
• pp.756-762
• /
• 2006

The objective of this study was to define the effects of various cooking and re-heating methods (pan roasting, steaming, oven grilling and micro-waving) on the cholesterol and formation of cholesterol oxidation products in beef loin during storage at $4^{\circ}C$. Raw samples showed lower total cholesterol content than cooked products sampled during storage for 6 d. The following cholesterol oxidation products (COPs) were separated by gas chromatography: $7{\beta}$-hydroxy cholesterol, $20{\alpha}$-hydroxy cholesterol, 25-hydroxy cholesterol, cholestane-$3{\beta}$, $5{\alpha}$, $6{\beta}$ triol (triol), ${\alpha}$-epoxide and 7-ketocholesterol. Total amounts of COPs/cholesterol at 0 d were 0.74, 0.63, 0.76, 1.23 and 0.83% for the raw sample, pan roasting, steaming, oven grilling and micro waving methods, respectively. After 6 d storage almost of the samples had higher content of total COPs than at 0 and 3 d; the lowest (0.55%) COPs was found in the steaming cooking and re-heating method. The highest (5.96%) of COPs was found in the pan roasting cooking and re-heating method after 6 d storage. In conclusion, the concentration of total cholesterol and cholesterol oxidation of beef loin were increased as a consequence of cooking and re-heating methods. Steaming and micro-waving methods showed the lowest of cholesterol oxidation products under refrigerated storage for 6 d. However, each cooking and re-heating method had its own distinctive cooking effects.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.49-52
• /
• 2007

We investigated hydrogen storage and production properties using redox system of iron oxide($Fe_{3}O_{4}$ + $4H_{2}$ ${\leftrightarrows}$ 3Fe + $4H_{2}O$) modified with rhodium, ceria and zirconia under atmospheric pressure. Reduction of iron oxide with hydrogen(hydrogen storage) and re-oxidation of reduced iron oxide with steam(hydrogen evolution) was carried out using a temperature programmed reaction(TPR) technique. On the temperature programmed studies, the effects of amounts of cerium and zirconium on the re-oxidation rate of partial reduced iron oxides were increased with increasing metal additives amount, but the rhodium amount showed little effect on the re-oxidation rate. On the thermal studies, the re-oxidation rates were enhanced with increasing temperature(300 $^{\circ}C$ < 350 $^{\circ}C$).

• The Korean Journal of Ceramics
• /
• 제5권3호
• /
• pp.211-216
• /
• 1999

Four different $\beta-Si_3N_4$ ceramics with silicon oxynitrides $[Y_10(SiO_4)_6N_2, Yb_4Si_2N_2O_7, Er_2Si_3N_4O_3, \;and La_{10}(SiO_4)_6N_2$, respectivley] as secondary phases have been fabricated by hot-pressing the $Si_3N_4-Re_4Si_2N_2O_7$ (Re=Y, Yb, Er, and La) compositions at $1820^{\circ}C$ for 2h under a pressure of 25 MPa. The high temperature strength and oxidation behavior of the hot-pressed ceramics were characterized and compared with those of the ceramics fabricated from $Si_3N_4-Si_2O_7$ compositions. The $Si_3N_4-Re_4Si_2N_2O_7$composition investigated herein showed comparable high temperature strength to those from $Si_3N_4-Re_2Si_2O_7$ compositions. Si3N4 ceramics from a $Si_3N_4-Y_4Si_2N_2O_7$ composition showed the highest strength of 877 MPa at $1200^{\circ}C$ among the compositions. All $Si_3N_4$ ceramics investigated herein showed a parabolic weight gain with oxidation time at $1400^{\circ}C$ and the oxidation products of the ceramics were $SiO_2$ and $Re_2Si_2O_7$. The $Si_3N_4-Re_4Si_2N_2O_7$ compositions showed inferior oxidation resistance to those from $Si_3n_4-Re_2Si_2O_7$ compositions, owing to the incompatibility of the secondary crystalline phases of those ceramics with $SiO_2$, the oxidation product of Si3N4.Si3N4 ceramics from a $Si_3N_4-Er_4Si_2N_2O_7$ composition showed the best oxidation resistance of 0.375mg/$\textrm{cm}^2$ after oxidation at $1400^{\circ}C$ for 102 h in air among the compositions.

• 열처리공학회지
• /
• 제14권2호
• /
• pp.81-88
• /
• 2001

The effects of post-oxidation and sulfnitriding treatments on the phase transformation in the nitrided case of tool steels have been studied. Dense and compact $Fe_3O_4$ layer was formed at the outer surface of nitride compound layer by post-oxidation treatment and multi layer of iron sulfide(FeS) was formed in the compound layer by sulfnitriding treatment. The surface hardness decreased because of formation of the soft oxide or sulfide at the nitride surface. Diffusion layer of nitride case was not affected by post-oxidation treatment or sulfnitriding treatment of nitrided alloy tool steels.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2018년도 춘계학술논문요약집
• /
• pp.51-52
• /
• 2018

Selective oxidation of RE elements from the U/RE metal ingot was studied in this paper using electrochemical process. Constant potential of -1.7V was applied between anode and cathode, where the potential value corresponds to standard potentials between actinide and rare earth materials. When the current values approached to nearly 0 mA, the reaction was finished. It is confirmed from the EPMA analysis that only U part of the U/RE ingot was remained. The metal recovered to the zinc cathode was obtained through the distillation process and it is being chemically analyzed in the KAERI analytical laboratory.

• 방사성폐기물학회지
• /
• 제18권2호
• /
• pp.207-215
• /
• 2020

희토류(Rare Earth) 함량이 높은 TRU 생성물 중의 RE 원소를 감소시키기 위하여 RE 원소와 UCl₃의 산화반응을 이용한 RE 제거 공정의 타당성을 HSC Chemistry 코드를 이용하여 검토하였다. 사용후핵연료에 포함된 TRU 원소 및 RE 원소의 조성 및 열역학적 자료를 검토하였으며, UCl₃와의 산화 반응에 따른 평형 자료를 계산하여 공정 가능성을 검토하였다. 실제 파이로 프로세싱 처리를 가정한 물질수지로부터 TRU 생성물의 RE 함량이 다른 두 가지 경우에 대하여 RE 원소 제거율과 TRU 회수율을 평가하였다. TRU 생성물을 산화제인 UCl₃와 반응시켰을 때 각 원소의 Gibbs free energy의 차이에 의한 선택적 산화 반응이 일어났다. 투입된 UCl₃ 양을 조절하여 TRU 회수율을 최대로 유지하면서도 RE 원소를 제거하여 최종생성물의 TRU/RE 비를 증가시킬 수 있는 가능성을 계산 결과로 확인하였다. 본 연구의 결과들은 열역학적 평형 자료에 기반한 결과이므로 실제 공정에 적용하기에는 많은 차이점이 존재한다. 그러나 TRU 물질을 취급하기 어려운 환경에서 파이로프로세싱의 TRU 생성물을 고속로의 핵연료로 공급하기 위한 공정 설계에 중요한 자료로 활용될 것으로 기대된다.

• 한국세라믹학회지
• /
• 제46권3호
• /
• pp.330-335
• /
• 2009

We investigated the effects of the re-oxidation temperature and time on the positive temperature coefficient (PTC) of resistivity characteristics of Sm-doped $BaTiO_3$ sintered at $1200{\sim}1260^{\circ}C$ for 2 h in a reducing atmosphere (3% $H_2/N_2$), followed by re-oxidization processes in air, in which re-oxidization temperature and time were $600{\sim}1000^{\circ}C$ and $1{\sim}10$h, respectively. The result reveals that Smdoped (Ba,Ca)$TiO_3$ ceramics fired in a reducing atmosphere exhibit low PTC characteristics, whereas the sample re-oxidized at $800^{\circ}C$ for 1 h in air exhibit pronounced PTC characteristics. The room-temperature resistivity and jumping characteristics of resistivity (${\rho}_{max}/{\rho}25^{\circ}C$) decrease with Sm contents. The PTC characteristics with reoxidization time at $800^{\circ}C$ have improved about $2{\sim}3$ orders of magnitude whereas differed according to the sintering temperature. The 0.7 at% Sm-doped (Ba,Ca)$TiO_3$ samples reveal the best PTC characteristics in the present range of formula and processes.