• 한국연소학회지
• /
• 제9권2호
• /
• pp.1-9
• /
• 2004

Activation energy asymptotics (AEA) for Linan#s diffusion-flame regime is revisited in this paper. The main purpose of the paper is to carefully re-examine each AEA analysis step in order to clarify the some concepts that are often misunderstood among the ordinary practitioners of the AEA. Particular attention is focused on the different AEA regimes arising from the double limit of large Zel#dovich and Damkohler numbers. In addition, the expansion procedures are shown in detail and the method that the turning point condition, commonly known as the Linan#s extinction condition, is found is explained.

• 전기학회논문지P
• /
• 제53권3호
• /
• pp.103-109
• /
• 2004

This paper has presented, taking an example of a gas separation plant, dynamic analysis on frequency decline caused by the over-loading at the generator and the knee point causing voltage instability due to reactive power required by re-acceleration of large induction motors, resulting in phenomena of failure in the conventional frequency load shedding. In order to resolve the voltage instability problem, a design of load shedding system employing under-voltage relays has been proposed to the industrial power system containing large induction motors in addition to the conventional load shedding employing frequency relays. For the purpose of dynamic analysis, models of gas turbine and governor, synchronous generator, brushless exciter, and induction motor are introduced.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.406-410
• /
• 2005

The wind turbine, Europe and the United States are different with the standards process each other when the manufacturing company which in order to demand the standards process to a construction in the multi country with interested parties of the corresponding nation to, always the re-agreement is difficult. Korean wind turbine also detail there is not a standard, when it produces and establishes of wind turbine, the problem point occurs. It is like that investigation of international standards system it leads and when it prepares the Acoustic noise measurement of the Wind Turbine Systems of Korea, it prepares the base for industrial development wind turbine of Korea.

• 대한원격탐사학회지
• /
• 제19권5호
• /
• pp.363-370
• /
• 2003

This paper describes a rectification procedure that relies on a polynomial model derived from the imaging geometry without loss of accuracy. By using polynomial model, one can effectively eliminate the iterative process to find an image pixel corresponding to each output grid point. With the imaging geometry and ephemeris data, a geo-location polynomial can be constructed from grid points that are produced by solving three equations simultaneously. And, in order to correct the local distortions induced by the geometry and terrain height, a distortion model has been incorporated in the procedure, which is a function of incidence angle and height at each pixel position. With this function, it is straightforward to calculate the pixel displacement due to distortions and then pixels are assigned to the output grid by re-sampling the displaced pixels. Most of the necessary information for the construction of polynomial model is available in the leader file and some can be derived from others. For validation, sample images of ERS-l PRI and Radarsat-l SGF have been processed by the proposed method and evaluated against ground truth acquired from 1:25,000 topography maps.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2006년 제4회 한국유체공학학술대회 논문집
• /
• pp.187-190
• /
• 2006

In the present study, effects of tree-stream turbulence and surface trip wire on the flow past a sphere at $Re\;=\;0.4\;{\times}\;10^5\;{\sim}\;2.8\;{\times}\;10^5$ are investigated through wind tunnel experiments. Various types of grids are installed upstream of the sphere in order to change the tree-stream turbulence intensity. In the case of surface trip wire, 0.5mm and 2mm trip wires are attached from $20^{\circ}\;{\sim}\;90^{\circ}$ at $10^{\circ}$ interval along the streamwise direction. To investigate the flow around a sphere, drag measurement using a load cell, surface-pressure measurement, surface visualization using oil-flow pattern and near-wall velocity measurement using an I-type hot-wire probe are conducted. In the variation of free-stream turbulence, the critical Reynolds number decreases and drag crisis occurs earlier with increasing turbulence intensity. With increasing Reynolds number, the laminar separation point moves downstream, but the reattachment point after laminar separation and the main separation point are fixed, resulting in constant drag coefficient at each free-stream turbulence intensity. At the supercritical regime, as Reynolds number is further increased, the separation bubble is regressed but the reattachment and the main separation points are fixed. In the case of surface trip wire directly disturbing the boundary layer flow, the critical Reynolds number decreases further with trip wire located more downstream. However, the drag coefficient after drag crisis remains constant irrespective of the trip location.

• 보건행정학회지
• /
• 제15권4호
• /
• pp.26-45
• /
• 2005

The purposes of this study were to Identify the .level of measurement on quality Indicators and evaluate the existing indicators in order to determine the priority of quality indicators' application in Korean general hospitals. A survey was conducted using a questionnaire. The subjects were quality managers working at general hospital having over 300 beds. The criteria were relevance, reliability, precision, impact, application, and preference to evaluate quality indicators. According to these six criteria, each indicator was evaluated on a five point scale(5: excellent, 1: poor). The response rate was $40.4\%$. The hospitals have monitored the average of 3.8 indicators(median 4). The indicators such as return to operating room, unplanned readmission, cancellation of booked operations, death, hospital infection, cesarean section rate, volume per disease or procedure, readmission, re-operation, blood transfusion, and post-procedural complications were frequently measured. The top ten quality indicators in the evaluation by its relevance, validity, reliability, impact, preference and application were decubitus ulcer, clean wound infection, fall, unplanned return to operation room, transfusion reactions, foreign body left In during procedure, unplanned readmission, wound infection after contaminated surgery, postoperative hemorrhage/hematoma, and cesarean section rate in order. The high priority quality indicators frequently measured could be used as primary national indicators. Standardized guidelines about monitoring indicators and the utilization will preliminarily be needed to compare and reuse the data for various purposes and improve the quality of care continuously.

• 산업경영시스템학회지
• /
• 제25권6호
• /
• pp.59-72
• /
• 2002

Along with the enlargement of WTO, issues about standardization activity are more and more become concerning object worldwide. Countries launch the work that putting the standardization in order, such as re-establishing their standardization strategy. With the chance of entering WTO, China is promoting the rebuilding of standardization system in order to conform to international standardization system. Thus, in this paper, research make it clear that the variation of circumstance of standardization activity, the importance of the standardization activity, and the international movement, in the meantime, it surveyed the development course of standardization activity and it's present operating system. By this means, it concludes the problems of present operating system and implies the improving scheme. Further more, this paper implies Chinese characteristic standardization system which conform with WTO/TBT and international standardization system. Firstly, through the comprehensive analysis on standardization system, it figures out the main function of relevant organizations in each working stage. Secondly, this paper makes a system model composed of possible three stage, and setup items needs promotion and main target in each stage. Finally, this paper point out the development direction of standardization system, it also implies it's limitation and the later possible research topic in this field.

• 대한기계학회논문집
• /
• 제14권3호
• /
• pp.725-733
• /
• 1990

본 연구에서는 Raju등의 연구의 확장으로 일정한 온도로 유지되는 경사진 평 판에 대하여 혼합대류 전 영역에 유효한 부력계수(.xi.)로서 (1+Gr$^{2}$$_{x}$cos.gamma./ Re$^{4}$$_{x}$)$_{-1}$를 적용하여 비상사 경계층 방정식을 유도하였다. 또한 적분 형 경계조건을 가진 편미분 경계층방정식을 유한차분법으로 Keller와 Cebeci의 Box scheme을 6차로 적용하여 수치해석하였다. 부력계수가 큰 영역에서 Mucoglu등의 해 석적 연구결과는 일정한 온도와 45˚의 경사를 유지하는 평판에 대한 Ramachandran의 실험적 연구결과와 약 10%정도 벗어난다. 이에 Ramachandran의 실험적 연구를 해석 적으로 재고찰하였다.하였다.

• 한국항행학회논문지
• /
• 제24권4호
• /
• pp.291-298
• /
• 2020

본 연구는 입자 무리 최적화 (PSO; particle swarm optimization) 알고리즘을 이용하여 기존의 MPPT 알고리즘보다 신속하게 MPP를 추적할 수 있는 모델을 제안하였다. 제안 모델은 PSO 알고리즘에서 gbest 및 pbest의 가속 상수를 높게 설정하여 신속하게 MPP 지점을 추적하고 이로 인한 전력 불안정 문제점을 제거하였다. 또한, 일사량의 급격한 변화에 따른 태양광 패널의 전력 변화를 감지하여 알고리즘을 다시 실행하였다. 실험결과, 일사량이 691.5W/m2에 대해서 MPPT 시간이 0.03초와 전력이 131.65로서 기존의 P&O와 INC 알고리즘보다 높은 전력과 빠른 속도로 MPP를 추적하였으며, 일사량 변화에 따라 신속하게 MPP를 추적하였다. 제안 모델은 태양광 패널이 병렬로 연결되어 있는 태양광 발전소에서 부분적인 음영에 의해 전력량의 변화를 감지하였을 경우에도 적용할 수 있다. 본 연구는 MPPT 알고리즘을 개선하기 위해 MFO (moth flame optimization) 및 WOA (whale optimization algorithm)와 같은 최적화 알고리즘에 대한 비교 연구가 필요하다.

• 한국해양공학회지
• /
• 제31권6호
• /
• pp.425-430
• /
• 2017

In order to reduce the cost of corrections and time needed for the block assembly process, the reverse setting method is applied for a back-heated block to neutralize deck deformation. The proper reverse setting shape for a back-heated block to correct deformation improved the deck flatness, but an excessive amount of reverse setting could inversely affect the flatness of the block. A prediction method was developed for the proper reverse setting shape using a back-heated block, considering the complex geometry of blocks, thickness of the deck plate, and thermal loading conditions such as welding and back-heating. The prediction method was developed by combining the re-meshing technique and inherent strain-based deformation analysis using the finite element method. Because the flatness deviation was decreased until the lower critical point and thereafter it tended to increase again, the optimum value for which the flatness was the best case was selected by repeatedly calculating the predefined reverse setting values. Based on this analysis and the study of the back-heating deformation of large assembly blocks, including the reverse setting shape, the mechanism for selecting the optimum reverse setting value was identified. The developed method was applied to the actual blocks of a ship, and it was confirmed that the flatness of the block was improved. It is concluded that the developed prediction method can be used to predict the optimum reverse setting shape value of a ship's block, which will reduce the cost of corrections in the construction stage.