• Asian-Australasian Journal of Animal Sciences
• /
• 제25권5호
• /
• pp.738-748
• /
• 2012

One of the main goals of small, medium and large farms is to improve the reproductive performance of rabbit does. Stocks of lower productivity can be improved by crossing with intensive breeds. A better nutritional status of both foetuses and suckling kits has a positive effect on their later productivity. Overfeeding young females before first mating can lead to conditions of fattiness. Using restricted feeding or higher fibre content in the feed and changing it for a higher level ad libitum feeding about one week prior to first mating leads to longer lifespan and higher productive level. Intensive reproductive rhythm creates a negative energy balance in does : they are unable to consume enough feed (energy) for the nutritional requirements of foetus and lactation, and therefore lose most of their fat reserves. Furthermore, primiparous does also expend energy because they are still growing. Under intensive conditions, the 42-d reproductive rhythm (re-mating 11 days after parturition) is recommended. Under extensive conditions, the 18 or 25-d mating interval with 35 to 42-d weaning could be suitable. On small farms, natural mating is favoured; on large farms AI is commonly employed. The main advantage of AI is the all-in, all-out system. Hormonal (PMSG) treatment is used with AI to increase receptivity on d 11. Frequent and high level PMSG use can lead to higher anti-PMSG antibody rates. Lower level (max. 20 IU) and less frequent PMSG injection or non-hormonal alternative methods (short dam-litter separation, changing nursing method or lighting programs) are recommended for this reason.

• Journal of Chest Surgery
• /
• 제29권6호
• /
• pp.626-631
• /
• 1996

The forty patients with carcirLoma of the esophagus or cardia seen at National Medical Center between November 1983 and April 1994 underwent surgical exploration. The esophagogastrectomy was carried out in 29 of 40 patients, one case through right thoracotomy, the others through left thoracotomy. Two patients underwent colon bypass surgeries due to upper esophageal cancer Transhiatal esop agectomy was performed In one case. Feeding gastrostomy or feeding jejunostomy were performed in 8 patients due to the advanced stage or malnutrition. In this report, we evaluated the long-term results in the 28 patients who underwent esophagogastrectomy for palliation through the left thoracotomy. There were 25 men(89%) and 3 women(11 %), and the mean age was 58.65$\pm$7.15 years(range, 46 to 73 years). The most frequent preoperative symptoms included dysphagia (22), weight loss (15), chest pain (6), vomiting (1), and hoarsness (1). Twenty-three patients had sqamous cell cancers of mid-and lower esophagus and five adenocarcionomas of cardia. One patient died in the hospital within 30 days of the op- eration for a hospital mortality rate of ).7%, Cause of death was sepsis due to anastomotic leakage. There were five additional complications in five patients; acute respiratory distress syndrome (1), post-op- erative bleeding (1), diaphragmatic hernia (1), acute renal failure (1) and late raft stenosis (1). The one year, 1틴o years, and three years acturial survival rate were 75.6$\pm$9.5%, 43.2$\pm$ 11.6%, 21.6: 10.5$\circledcirc$ re- spectively. The average survival was 21.8 months. The data from this study suggest that esophagogastrectomy through the left thoracotomy can achieve resonable long-term palliation for carci- noma of the esophagus. The operation can be performed with a low operative mortality and few serious postoperative complications.

• Advances in pediatric surgery
• /
• 제13권2호
• /
• pp.105-111
• /
• 2007

We reviewed the records of 25 patients who were re-operated upon after primary repair of esophageal atresia with or without fistula at the Department of Pediatric Surgery, Seoul National University Children's Hospital, from January 1997 to March 2007. Types of the esophageal atresia anomalies were Gross type A in 5 patients, C in 18, and E in 2. The indications for re-operation were anastomosis stricture (n = 14), tracheo-bronchial remnant (n = 4), persistent anastomosis leakage (n = 3), recurrent tracheo-esophageal fistula (n = 2) and esophageal web (n = 2). The interval between primary and secondary surgery was from 48 days to 26 years 5 months (mean: 2 years and 4 months). Four patients required a third operation. The interval between the second and third operation was between 1 year 1 month and 3 year 10 month (mean: 2 years 5 months). Mean follow up period after last operation was 35 months (1 years-8 years 6 months). The secondary surgery was end-to-end esophageal anastomosis in 15, esophagoplasty in 5, gastric tube replacement in 5. After secondary operation, 6 patients had anastomosis stricture (4 patients were relieved of the symptoms by balloon dilatation, 2 patients underwent tertiary operation). Five patients had leakage (sealed on conservative management in all). Two patients had recurrent tracheo-esophagel fistula (1 patient received chemical cauterization and 1 patient underwent tertiary operation). Currently, only one patient has feeding problems. There were no mortalities. Secondary esophageal surgery after primary surgery for esophageal atresia was effective and safe, should be positively considered when complications do not respond to nonoperative therapy.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제9권6호
• /
• pp.459-464
• /
• 2004

The objective of this study is to improve cephalosporin C (CPC) production byoptimization of medium and culture conditions. A statistical method was introduced to optimize the main culture medium. The main medium for CPC production was optimized using a statistical method. Glucose and corn steep liquor (CSL) were found to be the most effective factors for CPC production. Glucose and CSL were optimized to 2.84 and $6.68\%$, respectively. CPC produc­tion was improved $50\%$ by feeding of $5\%$ rice oil at day 3rd and 5th day during the shake flask culture of C acremonium M25. The effect of agitation speeds on CPC production in a 2.5-L bio­reactor was also investigated with fed-batch mode. The maximum cell mass (54.5 g/L) was obtained at 600 rpm. However, the maximum CPC production (0.98 g/L) was obtained at 500 rpm. At this condition, the maximum CPC production was improved about $132\%$ compared to the re­sult with batch flask culture.

• BMB Reports
• /
• 제42권9호
• /
• pp.568-573
• /
• 2009

Fatty acid oxidation (FAO) defects cause abnormal lipid accumulation in various tissues, which provides an opportunity to uncover novel genes that are involved in lipid metabolism. During a gene expression study in the riboflavin deficient induced FAO disorder in the chicken, we discovered the dramatic increase in mRNA levels of an uncharacterized gene, ANKRD9. No functions have been ascribed to ANKRD9 and its orthologs, although their sequences are well conserved among vertebrates. To provide insight into the function of ANKRD9, the expression of ANKRD9 mRNA in lipidperturbed paradigms was examined. The hepatic mRNA level of ANKRD9 was repressed by thyroid hormone ($T_3$) and fasting, elevated by re-feeding upon fasting. However, ANKRD9 mRNA level is reduced in response to apoptosis. Transient transfection assay with green fluorescent protein tagged- ANKRD9 showed that this protein is localized within the cytoplasm. These findings point to the possibility that ANKRD9 is involved in intracellular lipid accumulation.

• Asian-Australasian Journal of Animal Sciences
• /
• 제24권12호
• /
• pp.1706-1710
• /
• 2011

An experiment was conducted to investigate the effects of calcium (Ca) fertilization on oxalate content in napiergrass (Pennisetum purpureum) and on some blood parameters of sheep. Re-growth napiergrass was grown with or without Ca fertilizer and offered to sheep. Eight sheep, divided into two groups of 4 animals each were used. Calcium-fertilized napiergrass was offered daily to the animals as experimental treatment, whereas without Ca-fertilized napiergrass was given to the animals as control. Results showed that there was a trend to lower soluble and total oxalate concentrations in Ca-fertilized grass than control. The Ca-fertilized grass contained (p<0.05) lower concentrations of K and Mg than control, though Ca fertilization had no affect (p>0.05) on Ca and Na concentrations in plants. Feeding of Ca-fertilized grass had no affect on the feed consumption, blood Mg level and daily gain of sheep. However, sheep fed control grass had lower (p<0.05) blood Ca level than sheep fed Ca-fertilized grass. Our findings suggest that Ca fertilization might minimize the negative effects of oxalate.

• Asian-Australasian Journal of Animal Sciences
• /
• 제15권9호
• /
• pp.1364-1370
• /
• 2002

The objective of this study was to examine the effect of compensatory growth nutritional regimen on mammary gland growth and lactation. One hundred twenty-two Sprague Dawley female rats (35 days of age) were randomly assigned to either a control or a stair-step compensatory nutrition (SSCN) feeding regimen or an alternating 2-2-3-3-week schedule beginning with 40% energy restriction for 2 weeks followed by re-alimentation (control diet) for 2 weeks. Pup weight gain and milk yield were improved 8% and 8 to 15%, respectively, by the SSCN regimen. The gene expression of $\beta$-casein was 2.3-fold greater in the SSCN group than in the control group during early lactation, but they were greater at all stages of the second lactation. The gene expression of insulin-like growth factor-I was 40% lower in the SSCN group than in the control group during early lactation of the second lactation, but during late lactation it was 80% greater than in the control group. The concentration of serum corticosterone tended to be higher in the SSCN group during the late stage of the first lactation. These results suggest that the stair-step compensatory nutrition regimen improves lactation performance and persistency by modulation of cell differentiation and apoptotic cell death.

• 한국가축번식학회지
• /
• 제26권4호
• /
• pp.321-328
• /
• 2002

The hormone resistin is associated with type II diabetes mellitus in rodent model. Resistin impairs glucose tolerance and insulin action. A new class of anti-diabetic drugs were called thiazolidinediones (TZDs) downreguates a resistin. Resistin gene expression is induced during adipocyte differentiation and resistin polypeptide is secreted by adipocytes. But, the correlation between increased adiposity and resistin remains unknown. The objectives of this study was to clone a mouse resistin CDNA and to generate transgenic mice overexpressing mouse resistin gene. The pCMV-mus/resistin gene was prepared from previous recombinant pTargeT$^{TM}$-mus/resistin by digestion of Bgl II, and has used for microin- jection into pronuclei of one cell embryos. Mouse resistin expression was detected in transgenic F$_1$mice by RT-PCR. The transgenic mouse with resistin gene expression has heavier body weight which was measured higher level of plasma glucose than that of normal mouse. And in diet-induced experiments, in fasting group, resistin expression was higher than that of re-feeding group. This result demonstrates that the resistin gene overexpressing mice may be became to obesity and be useful as an animal disease model to be diabetes caused by insulin resistance of resistin.n.

• 디지털융복합연구
• /
• 제6권1호
• /
• pp.53-61
• /
• 2008

For the domestic digital contents, a proactive cooperation system or framework between the government, the businesses and research institutions, which would allow for free flow of interaction among these players, can play that role. We have proposed and realized the Dynamic Coordinating Framework(DCF) to bridge these gaps among the major players in the industry. The the Dynamic Coordinating Framework rests on the following major functions. The first major function of the DCF is to decipher any ambiguity that may be embedded in external inputs by stratified role and bias. The second function is to create cooperative groups that will deal with the ambiguities based on its consequent situation. The third is a feedback function that will draw out a new cooperative way by re-feeding the capacities and the conflicts that stem from the existing organizations and strategies into cooperation and adjustment process. Our DCF has compared and evaluated with England and Australia digital content industry models under AHP(Analytic Hierarchy Process) method. DCF has turned out to be well designed and have strong points based on OECD innovation and cooperation criteria.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2009년도 춘계학술발표대회
• /
• pp.15.2-15.2
• /
• 2009

Manufacturing of printed electronics using printing technology has begun to get into the hot issue in many ways due to the low cost effectiveness to existing semi-conductor process. This technology with both low cost and high productivity, can be applied in the production of organic thin film transistor (OTFT), solar cell, radio frequency identification (RFID) tag, printed battery, E-paper, touch screen panel, black matrix for liquid crystal display (LCD), flexible display, and so forth. The emerging technology to manufacture the products in mass production is roll-to-roll printing technology which is a manufacturing method by printings of multi-layered patterns composed of semi-conductive, dielectric and conductive layers. In contrary to the conventional printing machines in which printing precision is about $50~100{\mu}m$, the printing machines for printed electronics should have a precision under $30{\mu}m$. In general, in order to implement printed electronics, narrow width and gap printing, register of multi-layer printing by several printing units, and printing accuracy of under $30{\mu}m$ are all required. We developed the roll-to-roll printing equipment used for printed electronics, which is composed of un-winder, re-winder, tension measurement system, feeding units, dancer systems, guide unit, printing unit, vision system, dryer units, and various auxiliary devices. The equipment is designed based on cantilever type in which all rollers except printing ones have cantilever types, which could give more accurate machine precision as well as convenience for changing rollers and observing the process.